Is a solid wood door a pure log door? What is the real truth?

Solid wood door refers to the material of making wooden door, which is taken from natural logs or solid wood laminated timber from the forest. In general, the log door is compared, because the material of each part of the log door is the same tree species and the inside and outside are the same. The log door is made of whole wood, and the solid wood door is also made of real wood, but it is put together.

The log door is relatively high-end, because the material of each part of the log door is the same tree species and the inside and outside are the same, so it has the advantages of no deformation, no column, no finger joint, and no skin. Solid wood doors, although also made of pure wood, are generally made of scraps spliced and patched, or blockboards.

Made. <>

When identifying, you can distinguish the characteristics of natural wood, such as normal natural wood will have color difference or scarring, and you can also judge whether the texture on both sides of the wood is consistent (the log door is not consistent) and so on. The log door is generally not as stable as the solid wood door, because the stress of the log is greater than that of the laminated timber, which is particularly easy to deform, and the log door is also more expensive. It is recommended to choose the brand manufacturer's products, although the ** is slightly higher than that of small manufacturers, but the quality of material selection and processing are guaranteed.

The most direct difference between the two is that the ** of the log door is relatively high, while the ** of the solid wood door is relatively low, but compared with other categories, the ** of the solid wood door is also high.

Log doors are made from solid wood, such as elm.

Wood, beech.

and Catalpa. These woods are all natural, so the grain of the wood is very clear, and it also has a strong sense of three-dimensionality. Judging from the cross-section of the door side at the upper and lower ends, the cross-section of the door side of the log door is a single log, and there is no trace of decomposition in the whole process.

The bottom section of the door side of the solid wood door generally has decomposition laminated timber rubber marks, which will be more obvious. If the bottom of the door side section is not visible and the bottom of the door is one, it is generally a solid wood composite door.

The cross-section of the door side of the log door is generally a single strip of logs, which is relatively complete and has no traces of decomposition, while the bottom section of the solid wood door is generally a glue mark of decomposed and integrated wood. But if we can't see the cross-section of the door, then it is most likely a solid wood composite door.

It is not a pure log door, but also a synthetic door made of some other wood materials through a special process.

The solid wood door is not a pure log door, but the frame is solid wood, the central board is solid wood composite, and there is a mezzanine in the middle, and there are few log doors on the market now.

Wooden doors are one of the essential main materials in life, which not only plays an important role in safety and function, but also plays a decorative role in the overall style of home decoration. So, is the solid wood door good, and how to choose the home decoration? Let's take a look with Bian Xiao.

1.Solid wood doors have very good hardness and luster, which is a high-grade product. As long as it is wood, there will be some formaldehyde, and solid wood is the wood with the least formaldehyde.

Moreover, it has the advantages of mothproof, anti-fouling, moisture-proof, and anti-cracking, and is very durable. 2.The solid wooden door has a clear texture, which visually makes people feel very natural and comfortable, and has strong artistic decoration.

It's also good for home renovations. 3.There are many materials for solid wood doors, such as mahogany, ash, teak, white oak, etc., which can be selected according to different design styles.

It is also possible to choose the style according to different fields of use.

Log door is a type of interior door, log door is actually different from solid wood door, the wood used in solid wood door is generally finely processed, to create a darker door, and the log door is made of natural wood as raw materials, since it is pure natural wood, to create a good quality door product, the quality requirements for wood are relatively high, so the log door has more precious characteristics, so today we will introduce the log door in detail in the article.

What is a log door

Log door refers to the selection of natural imported wood slag reputation as raw material processing and production of wooden door, its main feature is that the material of each part of the door leaf is made of the same species and inside and outside the same, generally all the use of imported wood, this kind of solid wood door has no deformation, no cracking, no finger joint, no skin and other characteristics.

The difference between a log door and a real wooden door

Material: The materials of solid wood doors mainly include elm, ash, red pine, beech, oak, catalpa, peach and so on. Among them, red pine and elm are suitable for ordinary grade decoration; Ash wood, catalpa wood, oak wood is suitable for medium-grade decoration; Red beech and mahogany are suitable for higher-grade residential decoration.

Due to the selection of natural wood, the surface of the log door has the natural texture and natural deficiency of wood, which is inevitable, and its natural beauty is its uniqueness. It is a masterpiece of nature, beyond the reach of man. Returning to nature is the pursuit and desire of people in today's society.

Add long-term value to your luxury home. This is the fundamental reason why log doors are favored.

**: The ** of solid wood doors varies according to their wood materials, textures, etc. The market ** from 1500 yuan to 3000 yuan such as chaotic sections, low-grade pine, fir and so on (generally solid wood composite doors are used as filling materials), mid-range peach core, beech, maran, rubber wood, etc., high-grade solid wood walnut, cherry, sapele, red rosewood, rosewood, etc., and the high-grade teak door (a door without a set) is priced at 3000-4000 yuan.

Generally, the high-grade solid wood door does a good job in the dehydration process, and the relative moisture content is about 8%, so that the formed wooden door is not easy to deform and crack, and the use time will be longer.

In today's article, we mainly introduce the information related to the log door, you can see that we have divided the content of the log door into two parts, first of all, we introduce what the log door is, in fact, the market used to not distinguish between the log door and the solid wood door, but due to the need and progress of decoration, the log door began to be separated, so we also need to understand what is the difference between the log door and the solid wood door, we mentioned the two differences between the log door and the solid wood door, you can understand it.

You can get it for free

1. Materials. 1. Solid wood door: there are two kinds of log materials and laminated timber. Log materials include fir, pine, walnut, peach core, red wing, rosewood, mahogany, etc.; Laminated timber includes solid wood tooth joints, solid wood finger joints, pine, catalpa, oak and other materials.

2. Log door: mainly catalpa, a little good material, due to different origins, the use of catalpa wood furniture is considered high-end furniture.

Second, the process. 1. Solid wood door: The production of solid wood door is scientifically processed through drying, blanking, planing, tenoning, drilling, high-speed milling, assembly, grinding, painting and other processes, and the process is relatively simple.

2. Log door: the whole body is made of wood, which is the same inside and outside. In the process of wood to carry out a series of dehydration, drying and mechanical properties of the treatment, in order to ensure the stability of the wooden door, the selection of materials is difficult, the craftsmanship is high, is the high-end products in the wooden door.

Three**. 1. Solid wood door: ** It is different because of its wood with different materials, textures, etc., and low-grade pine, fir and so on; The mid-range ones include maran wood, rubber wood, etc.; High-grade solid wood includes walnut, cherry, rosewood, etc.

2. Log door: Compared with other wooden doors, log doors are expensive, but in the longitudinal comparison of log doors, there are also high and low.

Nowadays, many people choose wooden doors when decorating their houses, and there are two kinds of wooden doors that sell well on the market. A solid wooden door, a log door, some people want to make the house look quaint and quaint, set up a wooden door in the home. If you are not familiar with these two best-selling wooden doors, you will have doubts in your heart.

What is a log door and what is a solid wood door. What is the difference between a yuan wooden door and a solid wood door, and which one is better. Beijing Longfeng Mom vlog will explain to you.

Yuan wooden door refers to a wooden door where the external material and the internal material are completely unified, and there is no filling. The log door is a door core made of split large wood, and the material selection is very strict, not any wood can make a log door, and it has its special material requirements. Generally, wood (such as cedar, pine, etc.) itself has poor performance and cannot be used to process logs, so logs generally choose high-grade hardwood as the manufacturing material, which is relatively high.

Solid wood door refers to the frame of the door made of MDF.

The visible part of the surface is the bark of high-quality wood, and the inside of the door is filled with cedar. Pine and other relatively cheap wood. There are a wide range of materials for solid wood doors.

The processed finished door is not deformed, does not resist corrosion, does not crack, has the characteristics of heat insulation, etc., and is scientifically processed through drying, plates, shavings, window screens, eyes, high-speed milling, assembly, polishing, painting and other processes. The difference between a wooden door and a solid wooden door, please confirm whether it is a log or a composite material.

Solid wood doors are the same as solid wood buildings, and many people think that they are made of wood. In fact, this is a wrong view. The market actually has a wide range of solid wood doors.

Solid wood doors can be divided into two types: log materials and composite materials according to the solid wood materials used. Judging by the solid wood doors of the oak wood, the wood of these joints does not necessarily come from the same wood, but the kind of wood on the surface is made of oak. This kind of door is also real.

Because of the use of wood block splicing method, the cost is low, the stability is strong, and it is also environmentally friendly to nature. I hope mine can help you, and I also hope you can help me**, like, support me more, and follow me more. If you have any questions and requests, you can leave a message in the comment area, and I will reply one by one.

The color of the log door is relatively light, generally it is relatively smooth, and there is no texture on it, the color is darker if it is a wooden door, and there will be some roughness on it, and there are deep transverse lines on it.

The solid wood door is more natural, the texture is clearer, the gloss is very good, and the quality is also very high, which is divided into many different types. The craftsmanship of the log door is not very exquisite, and it contains more formaldehyde, which is relatively not very safe, and the quality is not good enough.

Look at its size, quality, color, composition, manufacturer, pattern, and price.

You can tap to listen to the sound, and at the same time, you can also feel the texture, and at the same time, you can gently lift it, feel the weight, and you can also ask the salesperson about the specific situation.

In fact, we can touch the texture, and secondly, we can also tap to listen to the sound, and we can also feel the weight in it, and at the same time, we can also ask the salesperson.

In the wooden door market, there are many types of wooden doors, not only solid wood doors, but alsoLog doorsand solid wood composite doors, the materials are very diverse. Well, what isLog doorsThis? Log doorsThose things!

1. What is a log door?

Log doors, all parts of the door leaf are made of the same wood species, and there is no other wood or chemical fiber filling. If there are some high-grade log doors, they will be completely taken from the same piece of precious wood, 100% pure natural wood. Nowadays, the log doors circulating on the market are good wood, such as walnut, red oak, cherry, teak, etc.

Eco-friendly and durable.

Features of log doors:

Eco-friendliness. The whole production of log doors adopts the whole page production process, the whole door panel has no seams, no skin, 80% less than the amount of glue adhesive of the solid wood door, which greatly reduces the breeding and release of harmful substances such as formaldehyde and benzene, and is the preferred wooden door for the elderly room and baby room.

Durability. The whole board of logs, no cutting, no splicing, coupled with its own great density, stability, corrosion resistance is super strong, and the service life starts at least 70 years.

Sound insulation. Due to the density of the internal structure of the log, there is no damage at all, so it has a very good sound insulation effect. The log itself can also secrete some oil, which can exude a woody fragrance and has the effect of repelling mosquitoes.

Second, solid wood doors.

Solid wood doors, mainly made of log wood and other wood integrated processing, compared with logs, or log doors are more graded. Nowadays, the solid wood doors on the market are more made of pine, fir and other woods.

Features of solid wood doors:

Eco-friendliness. The main material of the solid wood door is still solid wood, and the use of glue is only at the junction, and there is no glue for loose stools inside the wood. The content of formaldehyde and benzene is still a little, and compared with the log door, the environmental protection is still poor.

Durability. Solid wood doors with pine, maran wood and other wood species, need to be dehydrated, which is very demanding on the process, only the dehydration treatment of solid wood doors, is not prone to deformation, cracking and other problems.

Appearance. The solid wood door has a clear texture, good moldability, and a strong three-dimensional effect, but the sound insulation effect is slightly inferior to the log door.

It is more expensive than a solid wood door, so everyone has to look at the specific budget to buy.

Solid wood doorSolid wood door is mainly made of wooden door materials mainly from natural wood or a variety of wood splicing, after processing solid wood door has good wear resistance, compression resistance without deformation, sound insulation and other characteristics. The door core material of the solid wood door is generally pine-based, there is a certain wooden veneer outside, and the surface is veneered with wood veneer, and the door core material of the solid wood door is generally made of high-quality pine wood, which is made by high-temperature hot-pressing process, so the performance of the wooden door is stable, no cracking and deformation, and the solid wood door also has a certain high temperature resistance and flame retardant effect to a certain extent.

With the enhancement of people's awareness of environmental protection, now when choosing the wooden door, more preference is to choose the solid wood composite door, because the solid wood composite door is more environmentally friendly, the internal material of the solid wood composite door is mainly composite, and it is made of hot pressing through a special process, which can effectively avoid cracking and deformation. However, the solid wood composite door has particularly strict requirements for the material and process of veneer, and the surface of the solid wood composite door produced by some small wooden door manufacturers is made of inferior PVC surface material, which is particularly easy to cause damage and cracks on the surface. The core material of the 3D solid wood composite door is made of European ecological multi-layer board as the core material, and the strength and willfulness of the whole branch are increased by 3 times, and the façade is made of Italy"fendi"High-quality wood veneer, wear-resistant, moisture-proof, waterproof, and extraordinary texture.

The 3D solid wood composite door from the selection of materials to the production process are in line with environmental protection standards, and the use of German glue-free mortise and tenon structure edge banding, glue-free edge banding is more environmentally friendly, the formaldehyde emission of 3D wooden doors is only, less than the formaldehyde content of apples and onions, to meet the European E0 standard, environmental protection is more intimate.

Log door log door mainly refers to the selection of the same kind of wooden door as a raw material made of wooden door, the preciousness of the log door lies in the fact that all parts of the door are made of the same kind of wood, the material of the department to achieve complete unity, all wooden doors because the material is unified, so there is almost no need to use glue in the production process of the log door, but because of the integrity of the material, resulting in the use and waste of a large amount of wood, the log door has the natural texture of the wooden door, and the feel is also compound to the requirements of the woodist, used in the home environment, It gives people a sense of returning to nature, so it is also popular with some people to a certain extent. However, due to the influence of environmental protection and fashion concepts, modern urban young people are now more and more inclined to choose solid wood composite doors.

Craft door process door is a new concept, process door is also commonly known as plywood door, the door core material is mainly used is MDF, the surface of the door is generally made of paper, this kind of wooden door is relatively light in weight, very low, but due to the poor process and material, so the wooden door is easy to crack and deform and other problems, in the sale of process doors, many manufacturers have added some conceptual elements, so consumers should have a certain understanding of the plywood door when purchasing, beware of being deceived.