-
One, only the headphones can hear the sound, and the phone without the headphones will display the headphone mark, in this case the phone should enter the headphone mode.
Second, the headphone mode is automatically switched. When the earphones are plugged in, the headphone logo will come out, and the unplugged earphone logo will disappear automatically.
Third, it should be caused by the failure of the micro switch of the headphone jack, that is, the earphone has been unplugged, but the switch has not been disconnected in time.
Fourth, you can try to quickly plug in the earphones several times to see if you can make the headphone logo disappear, or restart the phone.
Fifth, if it still doesn't work, you have to take it to Xiaomi's after-sales outlets for testing, repair, and replace it with a new headphone jack.
-
Hi Hello, if only one earphone has no sound, it is normal to connect the other earphones, it must be a problem with the earphones themselves. If all the headphones can't work normally, it means that the audio module of the Xiaomi mobile phone you are arguing about has a fault, and in this case, you need to go to Xiaomi's officially authorized after-sales service outlets for maintenance
-
If the headset logo appears on your Xiaomi phone and there is no sound, it could be caused by several reasons:
1.The headphones are not connected properly: Confirm that the headphones are fully plugged into your phone's headphone jack. Sometimes incomplete plugging in will cause the phone to fail to switch to speaker mode.
2.Headset failure: Try to use other headphones or headphone jack adapter to test, if the other headphones can work properly, then the original headphones can be faulty.
3.Software issues: Sometimes the headphone logo but no sound is caused by a problem with the software source. Try restarting your phone and make sure that both the system and apps are up to date.
4.Hardware failure: If none of the above methods work, it may be that the phone's headphone jack or audio chip is malfunctioning. It is recommended to contact Xiaomi after-sales service or a professional mobile phone repair center for further troubleshooting and repair.
Remember, you'd better back up your important data on your phone before trying any fixes. <>
-
This situation occurs in Xiaomi Mi 4 mobile phones, you can try the following methods to solve it:
1. Don't worry if you encounter a problem with your phone, see if the sound is turned off in the settings.
2. See if you have selected static mode.
3. If there is no sound in the **, if the problem cannot be found after all the investigations have been checked, you can send it to the repair shop for inspection and maintenance.
-
1. There are two reasons for this situation: one is that the line between the mobile phone and the earphone is incompatible, and the other is that the earphone is broken.
2. If the earphone is good, it means that the earphone and the mobile phone earphone line are not compatible, and there is no way to use it normally.
3. When buying headphones for mobile phones, be sure to consult whether the headphones can be used on your mobile phone, so as not to affect the use of the purchased headphones if they are compatible.
-
Check the settings and try a different pair of headphones.
Try a different phone with your headphones.
4.If you haven't restarted it yet.
If it doesn't work, I'll look for a phone repairer.
-
Does the status bar show the headset logo? If you don't have it, it's not plugged in.,One of my classmates is just changing the meter 4 carefully.,I'm in a hurry.,The result is a little tight.。 It may also be recognized as the meter key (but this one has a hint, it shouldn't be), and it may be that the headset is broken (find someone else's phone to try it).
Finally, there is the problem of mobile phones......If it is to call Xiaomi customer service. I broke a headset last time, and it was replaced quickly, and it was quite good.
-
Possible poor contact because it is not the original headphones.
-
Maybe it's because the headphones are broken? Try it with a different headset.
The audio interface is as ??? as the microphone interface It could be an excuse or a setup issue.
1. Check whether the sound card, cable, speaker and other devices are connected normally. If you have a virus, you should run antivirus software for full antivirus. >>>More
Xiaomi Mi TV 4c 55 inches, the configuration is basically the same as 4A, the main change is the appearance. >>>More
If the phone has a situation where the touch screen is not sensitive and malfunctions, it is recommended: >>>More
Before using the TV, we need to connect the audio cable on the TV, if the audio cable on the TV is not connected correctly, there will be no sound on the TV during use. Solution:The audio cable of the TV is composed of two parts: the audio cable and the connector,When the TV has no sound, you need to reconnect the audio cable of the TV。 >>>More