Can Lenovo A308T flash in recovery mode or shutdown?

Yes, take card swiping as an example: use memory cards (SD, TF, etc.) to flash the machine, card swiping process:

3. Shut down, remove the SIM card, install the memory card, and it is recommended that the important things in the memory card should be backed up.

4. When shutting down, press the power button and the volume plus button at the same time, about ten seconds, and then let go.

5. Enter the recovery mode, i.e. REC mode.

6. Select Wipe Cache Partition to clear the cache.

7. After clearing the cache, select Wipe Data Factory and restore the factory settings.

8. Select "Install Zip from SDCARD", the power button is OK, then select Apply SDCARD:update, and the power button is OK, that is, select the flash package from the memory card to flash the machine, and wait patiently for it to be completed.

Dear Lenovo users, hello!

You can flash in recovery mode or wire flash in fastboot mode, but you cannot flash the computer in the shutdown state.

In addition, we do not recommend you to root and flash your phone.

After that, it will cause the phone to be unstable, and once the operation is wrong, the phone will not be able to be used normally.

2.The official firmware has undergone extensive testing and can be used stably.

Or after flashing, it will affect the warranty of the phone.

Therefore, we do not recommend that you root and flash your phone, if you have strong hands-on ability and are willing to take the risk (failure to flash may lose the warranty), you can consider flashing the phone yourself.

Lenovo asks the firmware area.

If you are not familiar with the flashing operation, it is recommended that you go to the local after-sales maintenance station to upgrade the flash. For specific tariffs, you can consult the staff of Lenovo authorized maintenance stations and service stations.

IDEA Forum.

Think Forum.

The steps for a factory reset of Lenovo A308T are as follows:

1. Turn off the phone completely;

2. When the phone is turned off, press the power button first, and then immediately press the volume down button + volume up button at the same time and don't let go, it will enter recovery after a while, note: press the volume up and down keys in recovery mode to select, and press the power button and home button to indicate OK;

3. After entering the recovery mode, you can choose to restore factory settings, no matter whether the phone is a recovery that comes with the system or a third-party recovery, as long as there is [wipe data factory reset];

4. Select [Wipe Data Factory Reset], then press the boot button to confirm, and then select [yes - delete all data].

5. Then re-select [Reboot System Now], press the power button to confirm, and then start the phone.

Go to [Settings] - [Backup & Reset] - [Factory Reset], you can check [Backup Data Before Reset] and [Format Internal Memory Card] as needed, and finally click [Reset Phone] to follow the prompts. Back up data before reset: If you select this option, you can back up important data content for restoration. Format Internal Memory Card: If this option is selected, all data contents from the internal memory card will be erased, including the data backed up on the internal memory card.

Hello. When the phone is completely turned off, press the volume up button and the power button at the same time to enter the selection mode interface, the volume up button is selected, the volume down button is OK, select "recovery mode", you can see the robot, and then click the home button to enter the recovery interface, the volume button is selected, the home button is OK, and the two "wipe" can be selected to clear the data. After the operation is complete, you can restart and move the cursor to reboot system now.

If you are unable to do it yourself, it is recommended that you take the time to go to the workshop and have an engineer assist you in handling the problem.

Lenovo authorized after-sales site inquiry.

You are welcome to contact us at any time or visit Lenovo Lewen (for consultation.

Press and hold the power buttons "+" and "-" and the volume button at the same time until you enter the interface and release the button, that is, enter the recovery mode.

In this interface, the volume button is available for the movement option, and the power button is the confirmation button.

After entering the recovery mode, operating Shuangqing will delete all data on the body, if it is not backed up, you must operate with caution.

After entering, you can see two wipes at the beginning, use the volume button to select "wipe data factory reset" and press the OK button to confirm, use the volume key to select "yes---delete all user data", and press the power button to confirm; Wait for it to finish, then run the wipe cache to return to the main menu, and finally select "Reboot System Now" to reboot the phone.

You need to go into recover mode.

When powered on, press the volume up and power button on the phone to enter the engineering mode and select Clear EES.