What is the name of the fabric used to make thickened car clothing car cover now?

The common ones in the thickened car clothing market are flocking car clothes and cotton car clothing, and there is a big difference between the two.

First, the difference between materials.

1. The material of the flocking car coat.

PEVA material, the so-called flocking car coat is planted with a layer of velvet on the basis of the original PVC, directly attached to it, and directly in contact with the car paint when used! Because such a car coat is flocking, there is no way to clean it, and the inside is in direct contact with the car paint, which is easy to stick to dust, and repeated use will pill, which may scratch the car paint! Flocking car clothing, known as PEVA car clothing in the industry, is also called thickened car clothing.

The cotton lint will fall off after softening for a long time, and PVC is easy to break at low temperatures in winter, and the service life is short.

2. The material of the cotton car coat.

There are nano materials, gold materials, double coated materials, after dry and wet friction treatment, the cotton inside is specially added with softener will not scratch the car paint, not only can effectively play the role of sunscreen (ultraviolet rays) rainproof, dustproof, anti-sand and stone, to solve the trouble caused by car washing, more importantly, the inner layer of hand-picked cotton can be very good for your car to keep warm and warm, in winter can ensure that the maximum temperature difference between indoor and outdoor cars is 28 degrees Celsius, to ensure that the car starts normally in winter. Lajin material is the best material in the car clothing market now, with a service life of more than 5 years!

Second, the difference in manufacturing process.

1. Flocking car clothing process.

The raw material of the flocking car clothing is covered with a large amount of glue on the non-woven fabric with paper pulp.

2. The process of adding cotton car clothing.

The cotton car coat is 3 layers of cotton, which is the same principle as the quilt. The outside is made of pulled gold, which is very effective against rain and snow, and can also be flame retardant.

The cotton-like thing you said is compounded, and the outer layer is made of coating, but my friend reacted to this cover, and then took a layer of fluff on the surface of the car ......

It's about 100 but the effect of keeping warm and cold-proof is very good, and it is recommended to use it in cold areas.

1. PVC material: The cover of this material can play a very good role in rainproof and dustproof, and can protect the vehicle well in rainy days and areas with a lot of sand. However, the cover of this material can only be used on one side, and the effect is average in terms of sun protection and scratch protection; 2. PEVA material:

The cover of this material is relatively good in performance, with multiple functions such as wind and rain protection, and its weight is very light and elastic, and it is not easy to be damaged. At the same time, it also has excellent flame retardant ability, which can fully protect the vehicle in high temperature environments. At present, the PEVA material cover has not yet had major shortcomings; 3. Oxford cloth flame retardant material:

This is a double-sided cover, with a silver side on one side and a custom color surface on the other side to protect against dust, rain, and scratches. The silver side is mainly used for sun protection, because the silver has a strong ability to absorb ultraviolet rays, and the other side can be customized to meet the color preferences of the owner, and at the same time can have a certain decoration for the vehicle. The disadvantage of this cover is that it is not wear-resistant, and it is easy to scratch when used in areas with large wind and sand.

Because the thickened cotton car clothing is a bit useful in the Northeast Inner Mongolia region when the temperature is low in winter, there is no garage and no undergroundParking spacesThe car can only be parked in the open air, and the cotton car cover has a certain thermal insulation effect. The benefits are as follows:

Let's say you drive home from work at night, and after the water temperature of the car engine has completely risen, stop the car and cover the clothes. When I go to work the next morning and take off my clothes, the temperature is basically eight to ten degrees warmer than the outside. My car has a lack of outside temperature, a night down assuming that the car shows minus 10 degrees, not long out of the schedule will be minus 18.

The car is parked for more than 24 hours under full preheating, and the temperature is basically the same as the outside world. In extremely cold areas, the vehicle will not catch fire in winter, and it can also protect the vehicle to a certain extent.

Cons:

It is laborious to cover the car clothes, and it is laborious to collect the car clothes, which takes up space, and the trunk is basically full when you put it away. It's very dirty, and the clothes are outside for a night, and they are covered with dust, and they are often rubbed all over the body.

Another point is that when the wind is strong, the heat preservation effect is basically lost, no matter how the edge is closed, even if it is pressed with stones, the car clothes will flutter with the wind when the wind is strong. It is unlikely that the cotton jersey will be blown off by the wind, after all, it is heavy. But the wind kept blowing inside, and there was no talk of insulation.

What are the pros and cons of car covering? The advantages and disadvantages of covering the car coat are as follows: 1. Benefits:

1. It can prevent sand and gravel splashing from damaging the car body and covering the scratches of the car body. It can also effectively prevent the damage to the vehicle caused by falling objects, fireworks and other accidents. 2. It can refract harmful light, block the damage caused by strong light to the car paint, and protect the gloss and durability of the original paint.

2. Disadvantages: 1. Affect the driver's line of sight and vision. It will not only affect your own line of sight, but may even interfere with the line of sight of several cars behind, resulting in traffic accidents such as rear-end collisions.

2. Inferior car clothing will pollute the air environment in the car and harm health. @2019

The advantages and disadvantages of covering the car cover are as follows: 1. Benefits: 1. It can prevent sand and gravel from splashing and damaging the car body and covering the scratches of the body.

It can also effectively prevent the damage to the vehicle caused by falling objects, fireworks and other accidents. 2. It can refract harmful light, block the damage caused by strong light to the car paint, and protect the gloss and durability of the original paint. Second, the disadvantages:

1. Affect the driver's line of sight and vision. It will not only affect your own line of sight, but may even interfere with the line of sight of several cars behind, resulting in traffic accidents such as rear-end collisions. 2. Inferior car clothing will pollute the air environment in the car and harm health.

Hello! Car covers usually need to have sun, rain, wind and other properties, and it is best to choose materials with good breathability and super resistance to wear and tear. The material of the car cover is generally based on densely woven materials, and the more common materials on the market are:

1.Polyester cloth: Polyester cloth is not only light and breathable, but also has waterproof and anti-ultraviolet functions, and is widely used in car covers.

2.Nylon cloth: nylon cloth is strong and wear-resistant, light and soft, with good waterproof effect, if it is a rubber-coated nylon cloth, it has the ability to prevent rain from jujube.

3.Coated fabrics: Coated fabrics are very waterproof and do not require additional waterproof materials to achieve rain resistance, but they are not breathable.

4.Cotton fabrics: Although cotton fabrics have good breathability and softness, they are generally waterproof and are not recommended.

To sum up, polyester cloth and nylon cloth are the most widely used and cost-effective stool cover materials on the market, and the selection of specific materials should take into account the needs and economic conditions of Shili Yanji. <>