What does the Oaks Wave Wheel Washing Machine mean when it shows E9

The washing machine shows E9** to mean that the washing machine does not drain water, or no more water enters the washing machine after the dehydration is completed.

Reasons for the failure:

Clause.

1. If the cover of the clothing machine is not closed, the program safety self-test cannot be passed, and an automatic alarm will be generated and the operation will be stopped.

Clause.

2. There are debris blockages in the drainage pipeline, resulting in the wrong closure of the rubber cover and the suspension of the washing machine.

Clause.

3. High current lock.

Knowledge Expansion] Common sense of washing machine maintenance:

1. After each washing, the stagnant water in the pipeline should be discharged in time.

2. To prevent mechanical damage, do not force the drainage pipe, and keep the drainage pipe clean.

3. It is best not to place the washing machine in a humid bathroom, otherwise the shell is easy to age.

The display of E9 means that the high temperature protection is more than 30 degrees.

Unplug the power and plug it back in, or pull a power strip from another one, I have met several such users, this is because the machine is damp, easy to leak, and the machine's self-protection function.

Just remove the R436 resistor from the board or cut the R346 resistor pin.

If the lid of the washing machine is not closed, the program safety self-test cannot be passed, and an automatic alarm will be generated and the operation will be stopped. Close the lid of the washing machine.

There was debris in the drain line, which caused the washing machine to stop running. The backsplash of the washing machine needs to be disassembled, the drain pipe removed, and the foreign object can be removed with a tool.

Advantages of the washing machine:

The power of the washing machine is about 400 watts, and the power consumption is less than one kilowatt-hour. The washing power of the drum washing machine is generally about 1200-2500 watts, and the drum washing machine needs an electric heater to raise the water temperature to achieve a better washing effect.

Short washing time: the washing time of the washing machine is 40 minutes, and less time if you customize the program; The washing time of the drum washing machine is generally 1-2 hours, although some models now have a quick wash function, but they are only used when there is less clothes.

High cleaning rate: According to the actual test, the washing rate of the drum washing machine is about 75%, while the washing rate of the drum washing machine is as high as 95%. Drum washing machines only need room temperature water to wash clothes cleanly, while front-loading washing machines need heat to wash clothes cleanly.

First, the washing machine is faulty** e9, it should be the abnormal drainage position. Second, the solution to the washing machine failure** E9: Check if the drain pipe end is too low (check whether the drain pipe bracket on the back is damaged).

Check that the end of the drain is not soaked in water.

The display of E9 means that the high temperature protection is more than 30 degrees.

1. Unplug the power and plug it back in, or pull a power strip from another one.

This is because the machine is damp, Yuzhen is easy to leak, the self-protection function of the machine, it is best to pull a plug-in board from elsewhere to try, if you can't do it, put it in a ventilated place to ventilate. Try it on the plug-in board, remove the R436 resistor on the circuit board or cut off the R346 resistor pin.

2. The lid of the washing machine is not closed, resulting in the failure of the program safety self-inspection, an automatic alarm is generated and the operation is stopped, the lid of the washing machine is closed, and there are sundries in the drainage pipeline, resulting in a closing error, and the washing machine is out of operation.

Hello boss, the reasons for the washing machine to display e9 failure are as follows: 1. The washing machine high current lock failure washing machine high current lock failure will also show the e9 failure, usually remember to check when using the washing machine, if it is because of the washing machine high current lock failure caused the washing machine to display e9, then it needs to be replaced, so that professional personnel can come to the door to see. 2. Washing machine drain pipe failureThe washing machine drain pipe failure will make the washing machine display E9, you know, the drain pipe is blocked by debris, resulting in wrong closing, and the washing machine will stop running if it stops sleepy.

If it is confirmed that the drain pipe of the washing machine is blocked, you need to disassemble the washing machine baffle to remove the drain pipe, and use a tool to clamp out the foreign matter. 3. If the lid of the washing machine is not closed or the lid of the washing machine is not closed or not closed, the washing machine will also cause E9 failure, and the lid of the washing machine will not be closed, resulting in the failure of the program safety self-check, and the automatic alarm of Minqiao will be generated and the operation will be stopped. The solution is to close the lid of the washing machine, the uneven position of the washing machine will also make the lid of the washing machine bad, it is recommended to adjust the position of the washing machine.

The washing machine showing E9 is usually caused by a malfunction or error. While different brands and models of shrubbers may have different E9 failures**, usually E9 indicates one of the following problems:

1.The water level sensor in the water tank is not working properly: When the water level sensor in the water tank in the washing machine cannot detect the liquid level, the E9 prompt will malfunction. This may be due to damage to the side reader, circuit failure, etc.

Therefore, it is possible to reduce valve maintenance through preventive measures such as replacing pipes and installing appropriate filters in the case of water heater replacement.

3.Failure of the main control board of the washing machine: When the control panel or main control board of the washing machine fails, the washing machine may have an abnormal E9 alarm, resulting in the failure of the washing operation.

Solution:1Check and clean the water tank: It may be due to the accumulation of too much foreign matter in the water tank and the sensor cannot detect the water level, so use manual or cleaning products to clean the appropriate amount.

2.Check the water valve solenoid coil: Check to confirm whether the water valve solenoid coil of the washing machine is damaged, and if you find a problem, it is recommended to replace it.

3.Check and replace faulty components: If the E9 alarm still appears after ruling out the above conditions, it may be that other post office components such as the main control board are faulty, and you need to contact professional after-sales personnel or relevant maintenance personnel to check and replace the faulty components.

If you are unable to diagnose or resolve the E9 error code, it is recommended to contact the after-sales customer service of the relevant manufacturer and explain the specific situation of Slide Orange for targeted help or change the repair service.

The E9 is a faulty washing machine** and usually indicates a faulty water level sensor. The water level sensor is an important component in the washing machine, which is used to detect the water level inside the washing machine to control the water level and water volume of the washing machine.

If your washing machine shows an E9 failure**, you can try the following:

Check that the washing machine's water inlet pipe is properly connected and that the faucet is open.

Check whether the drain pipe of the washing machine is connected properly and whether the drain outlet is blocked.

Check the washing machine's water level sensor for damage or looseness. You can check if the sensor's wires are securely connected, or use a multimeter to detect if the sensor's resistance value is normal.

If none of the above fails, more in-depth troubleshooting may be required, or a professional repair may be required.

It should be noted that if the washing machine fails, it should be stopped immediately and disconnected from the power supply to avoid further damage or safety incidents.

If the Haier washing machine shows fault E9**, it means that the washing machine has stopped running for self-protection over the water level. Fault E9** means that the water is not drained, or no more water enters after the dehydration is completed, and the fault may be caused by four situations: 1. The washing machine cover is not closed or not closed tightly, resulting in the failure of the program safety self-test, generating an automatic alarm and stopping the operation; 2.

The drain line is blocked by debris (usually coins, pen cases, and pen caps), resulting in incorrect closure and the washing machine being shut down. It is necessary to disassemble the backsplash of the washing machine, remove the drain pipe, and use a tool to remove the foreign object before it can be recovered. 3. The drain pipe of the washing machine is self-folding, resulting in the drain pipe not being drained.

4. If the drain valve of the washing machine is faulty or the drain filter is blocked by foreign matter, and the drain valve fails, please ask the Haier Washing Machine After-sales Service Center to send personnel to the door-to-door inspection box to change the hailstorm; If the drain filter is clogged with foreign objects, just remove the drain filter plug by yourself. And wash the drain filter with clean water to operate normally.