Siemens washing machines show what the E18 is faulty

The Siemens washing machine shows that the E18 is a fault**, which means that the drain is overtimed fault, and the reason for this fault is:

1. The drain pipe is not put down. The reason for this problem: Putting down the drain pipe of the washing machine will solve the problem.

2. The drainage pipe is deformed, resulting in the distortion of the drainage pipe. The reason for this problem: straighten the drain pipe of the washing machine to facilitate drainage.

3. The drainage pipe is not smooth, and the reason for solving this problem is to clean up the foreign matter in the drainage pipe and clean it up.

Extended Resources:

Daily maintenance of the washing machine.

Lubrication. In order to make the washing machine run normally and easily for a long time, it is necessary to carry out correct lubrication and maintenance on time, the main places that need to be lubricated are bearings and gears, and the bearings need to be injected with L-TSA22 anti-rust and anti-oxidation lubricating oil with good wear resistance and oxidation stability through the oil injection hole, and generally refueled once a year if used for general mechanical oil.

For gears, No. 2 extreme pressure lithium-based grease with good adhesion should be used, or with good oiliness, plus mass fraction.

Lubricated with 1% zinc dialkyl dithiophosphate, or 3% mass fraction MOS2, L-CKC100 medium extreme pressure anti-wear gear oil. The bearings and gears of the spin dryer should be added with L-AN15 and L-AN68 lubricating oil with good oxidation, anti-rust and anti-wear properties every year or half a year. With sealed rolling bearings.

, it should be sealed by the bearing factory with a service life of more than 1000h, polyurea.

Base thickens refined petroleum lubricating oil, and adds anti-rust antioxidants.

No. 2 grease.

Contamination of the machine cell. Household automatic washing machines are generally composed of stainless steel inner cylinders and outer cylinders, and the interlayer of the inner and outer cylinders is called the washing machine tank. Studies have shown that when the washing machine is running, the water flows back and forth in the tank, and over time, a large amount of dirt can adhere to the tank.

Year after year, this large number of bacteria already exists on the inner walls of the washing machine, and as the number of washing clothes increases, so does it. Some strains may not be destroyed even by drying, especially in close-fitting underwear. So we must be wary of the washing machine on the clothes"Secondary pollution"

Cleaning and disinfection methods.

There are two common cleaning methods, one is to ask professional maintenance workers to disassemble the washing machine tank for cleaning, which is more expensive and troublesome; The other is to use a professional washing machine tank cleaner with a high sterilization rate for cleaning, which is completed in one step and is simple and effective.

Thank you landlord, stuck three coins, have taken it out, the washing machine is normal.

How can you open the drain below.

The Siemens washing machine shows that there is no fault with the E18.

So that you can learn to record every day? In the city there is.

There is in the instruction manual, I just came across today: open the lower right drain cover, make a big pot, prepare a large basin, open the Du Se of the small pipe, start draining, unscrew the big lid after draining the water, take out the stolen goods, until the small wheel inside can rotate smoothly, it's OK, and then install it in reverse order. I'm actually a sock, I don't know how to block it.

It is recommended to contact the official customer service to see the situation.

Having time is not omnipotent must ask Siemens after-sales.

The Siemens front-loading washing machine displays E18, which means that the drain is out of order.

Cause of failure: 1. The drainage pipe is not put down.

2. The drainage pipe is deformed, resulting in the distortion of the drainage pipe.

3. The drainage pipe is not smooth.

Solution: 1. Put down the drain pipe of the washing machine to solve the fault.

2. Straighten the drain pipe of the washing machine to facilitate drainage.

3. Clean up the foreign matter in the drain pipe and clean it up.

The failure caused by the above three reasons can be solved by yourself, if it is not for the above reasons, look at the next analysis:

If the washing machine still does not drain water, adjust the washing machine's program to single dewatering, and then start the washing machine, and listen to the drain motor for the sound of pumping. If there is a pumping sound, it means that the drain motor is working normally.

Then check whether the drain valve of the washing machine is blocked, determine whether the tension spring of the drain valve has fallen off or is rusted and broken, and if these occur, it is recommended to clean or replace the damaged parts.

The Siemens front-loading washing machine displays E18, which means that the drain is out of order.

The specific causes and solutions are as follows:

1. It may be that the drain pipe is not taken out and placed on the ground, resulting in the washing machine being unable to drain the water.

Solution: Take out the drain pipe of the washing machine and place it on the ground steadily.

2. It may be that the drain pipe or drain valve of the washing machine is blocked by foreign objects, resulting in the failure of the washing machine drainage.

Solution: Clean up the foreign matter at the drain pipe or drain valve, and find a professional to solve it if necessary.

3. It may be that the drain pipe of the washing machine is deformed and twisted, resulting in the drain pipe not being able to drain normally.

Solution: Straighten the drain pipe of the washing machine, and replace it with a new drain if necessary.

4. It may be that the components related to the drainage system in the washing machine are damaged, resulting in the washing machine being unable to drain properly.

Solution: Contact the after-sales service of the washing machine and find a professional for inspection and maintenance.

Common sense of washing machine maintenance.

1. The washing machine should be read carefully before use. When in use, the washing machine should be placed on a flat and solid ground, and the distance from the wall and other items must be kept at least 5 cm.

2. The washing should be classified and washed in batches according to the material, color and degree of dirt.

3. Before laundry, remove the debris in the pocket to prevent hard objects such as nails, coins, and cards from entering the laundry bucket; Clothes with sediment should be removed from the sediment before putting them in the laundry bucket; Wool should be washed in a yarn bag.

The above content refers to the solution of Siemens maintenance network - Siemens drum washing machine display E18 failure**; White Egg Encyclopedia - Washing machine.

Cause of failure and treatment method:

1. If the drain pipe is not put down or the drain pipe is broken and deformed, the solution is to put the drain pipe down, and if it is rupture and deformed, the drain pipe needs to be replaced directly.

2. The drain pipe is blocked, in this case, it is necessary to clean up the foreign matter in the drain pipe, and clean the drain pipe.

3. The drain pipe is twisted and cannot be eliminated, so the drain pipe of the washing machine should be straightened to ensure convenient drainage.

The above is a simple way to solve it yourself, if you can't solve it, you can consult the official after-sales customer service to help solve it.

Clogged clothing.

Open the lower right drain lid, prepare the large basin, open the blockage of the small pipe, start draining, unscrew the big lid after draining the water, and take out the swag until the small wheel inside can rotate smoothly.

Then put it up in reverse order.

As soon as the drum washing machine is activated, the door lock is automatically locked.

There is in the instruction manual, I just came across today: open the lower right drain cover, make a big pot, prepare a large basin, open the Du Se of the small pipe, start draining, unscrew the big lid after draining the water, take out the stolen goods, until the small wheel inside can rotate smoothly, it's OK, and then install it in reverse order. I'm actually a sock, I don't know how to block it.

If a Siemens washing machine shows an e18, it usually means that there is a drainage problem. This could be due to a clogged or damaged drain pipe, or the filter needs to be cleaned. It is recommended to check whether the drainage pipe is blocked, clean up the dry filter, and then restart the washing machine.

Hello, I'm glad to answer for you, Siemens washing machine display E18 means, drainage timeout failure, Siemens washing machine E18 so the reason for the cover wide barrier: 1. The drainage pipe is not put down. Reasons to solve this kind of problem:

Put down the drain pipe of the Wuliang washing machine to solve the problem. 2. The drainage pipe is deformed, resulting in the distortion of the drainage pipe. Reasons to solve this kind of problem:

Straighten the drain pipe of the washing machine to facilitate drainage. 3. The drainage pipe is not smooth, and the reason for solving this problem is to clean up the foreign matter of the old drainage pipe, and clean it up.

The Siemens washing machine shows that the E18 is a fault**, which means that the drain is out of time.

The reasons for this malfunction are:

1. The drain pipe is not put down.

The reason for solving the problem: Putting down the drain of the washing machine can solve the problem.

2. The deformation of the drainage pipe causes the deformation of the drainage pipe.

The reason for the problem: straighten the drain pipe of the washing machine and let the water drain out.

3. The drainage pipe is not smooth.

The reason for the problem: clean the drain pipe of foreign matter, clean it up.

There is in the instruction manual, I just came across today: open the lower right drain cover, make a big pot, prepare a large basin, open the Du Se of the small pipe, start draining, unscrew the big lid after draining the water, take out the stolen goods, until the small wheel inside can rotate smoothly, it's OK, and then install it in reverse order. I'm actually a sock, I don't know how to block it.