Why does my family s wave wheel automatic washing machine turn on the water pipe and not enter the w

This is not a fault, it is a relationship between not starting the washing machine program.

After starting, the program will control and open the inlet valve when needed.

There is a solenoid valve inside the fully automatic washing machine. When to enter the water and when to stop the water inlet is achieved by the program control solenoid valve. When the faucet is on, and the solenoid valve of the washing machine is closed (the washing machine does not enter the water), there is pressure in the pipeline connecting the faucet and the washing machine, but this pressure is not very high, that is, the water supply pressure when the tap water reaches your home, and the pipeline is completely able to withstand it.

So it's okay to leave the faucet on all the time. But the best thing to do is to turn the faucet on before washing and turn it off when it's done. It is not necessary to turn on for a while and turn off for a while during the laundry process.

Fully automatic washing machine.

There is a valve for the water inlet.

The valve switch is controlled by a computer program board.

When the faucet is turned on, the water inlet valve of the washing machine will open and start to fill the water after selecting the program on the control panel and pressing the "start" button.

If you press the "start" button and the washing machine still does not enter the water, then check that the water inlet pipe is close to the end of the washing machine, loosen the knob connecting the water inlet pipe and the washing machine, and then see if the filter screen in the water inlet of the washing machine is plugged, clean up the scale and reconnect the water inlet pipe. If there is no water ingress, it can only be that the water inlet valve switch is broken, and the 4006999999 let the after-sales service come to deal with it.

1. The washing machine does not enter the water, which may be because the lid of the washing machine is not covered; 2. There may also be a failure of the inlet water inlet valve; 3. It is also possible that the water valve filter is damaged; 4. It may be the reason why the control board is flooded and the relay is damaged. Back to hand.

Suggested workaround:

1. This is not a problem with the washing machine itself, but because the washing machine is not used normally, as long as it is operated normally.

2. Check the solenoid valve to see if it is in poor contact, and if it is in poor contact, you should ask professional maintenance personnel to come to the door for maintenance as soon as possible.

3. You can check whether the filter screen of the inlet valve is blocked, and then see if the inlet valve is broken. If there is no problem with either of these, then use a multimeter AC voltage block to measure the voltage of 220V at both ends of the solenoid valve, which is to prove that the fault is in the solenoid valve itself, if the solenoid valve is faulty, it should be better solenoid valve.

4. If water enters the control board, it will cause damage to the relay, and the washing machine will also not enter the water. You should check whether the relay on the control board in the washing machine is damaged, and if it is damaged, it needs to be replaced before the washing machine can enter the water normally.

1. The washing machine does not enter the water, probably because the lid of the washing machine is not covered, which is not a problem of the washing machine itself, but because the washing machine is not used normally.

2. The reason why the washing machine does not enter the water may also be that the water inlet valve is faulty. Check the solenoid valve to see if it is in poor contact, and if so, you should ask a professional maintenance personnel to come to the door as soon as possible to repair it.

3. In addition, if the washing machine does not enter the water, it is also possible that the water valve filter is damaged. At this time, you can check whether the filter screen of the inlet valve is blocked, and then see if the inlet valve is broken. If there is no problem with both, then use a multimeter AC voltage block to measure the voltage of 220V at both ends of the solenoid valve, which proves that the fault is due to the solenoid valve itself.

4. If the water inlet relay on the control board is damaged, then the washing machine will also not enter the water. The relays on the control panel in the washing machine should be checked for damage, and if they are damaged, they need to be replaced before the washing machine can be flooded properly.

1. The inlet valve of the washing machine is damaged or the filter screen of the inlet valve is blocked, resulting in the washing machine being unable to enter the water.

2. It is possible that the lid of the washing machine is not properly covered, or there is a problem with the switch, which causes the system of the washing machine to think that the lid is not covered properly, so that no water will enter.

3. It may be that the water pressure in the home is too small, resulting in the water flow not being able to enter the washing machine when using the washing machine.

4. The faucet connected to the washing machine is damaged or not opened, resulting in the washing machine not entering the water.

There are generally three reasons why fully automatic washing machines do not enter the water:

First, the filter screen of the inlet valve is blocked;

Second, the water inlet solenoid valve is faulty or the plug-in line is in poor contact;

The third is that the water inlet relay on the control board is broken.

If you set the washing machine to the washing program, the washing machine does not enter the washing machine after pressing the start button:

First, turn on the power and close your ears to the water inlet valve to hear if there is a "buzzing" sound;

If you understand electricity, you can open the washing machine yourself to see that there is a water inlet motor, try to find the two wires with a multimeter to measure whether there is a voltage when entering the water, if there is no voltage, then the problem may be on the computer board, at this time you should try to replace the computer board;

If you can hear the "buzzing" sound, check whether the tap water is cut off, turn off the faucet, unscrew out the inlet pipe joint to check whether the filter screen of the inlet valve is blocked by foreign matter, and pull out the filter screen for cleaning, the problem has not been solved and the inlet valve should be replaced, and the valve core of the inlet valve may be stuck and cannot be opened.

If you find that the reason why the automatic washing machine does not enter the water is not the one mentioned above, then the hole may be a problem inside the machine, and it is best to contact a professional maintenance personnel to repair the Nashen hole.

Washing machine is a cleaning appliance that uses electric filial piety to produce mechanical action to wash clothes, and is divided into two categories: household and collective according to its rated washing capacity.

China stipulates that the washing capacity of less than 6 kg belongs to the household washing machine: the household washing machine is mainly composed of a box, a washing and dehydration bucket (some washing and dewatering buckets are separated), transmission and control systems, etc., and some are also equipped with heating devices. Washing machines generally refer to the use of water as the main cleaning liquid, as opposed to the use of special cleaning solutions, and the dry cleaning that is usually carried out by a dedicated person.

Summary. It is recommended that you check whether the drain valve can work normally, or you can contact the maintenance personnel to come to the door to test, not entering the water is generally a problem with the water inlet valve, if it can enter the water normally, then it is not a problem with the water inlet valve. If you can't drain the water, it is recommended that you check the drain valve, turn off the washing machine, and reconnect it after 5 minutes to see if it can return to normal.

Unplug the washing machine and wait a few minutes to turn it back on, if you don't hear a buzzing sound when the water is in, it is very likely that the water inlet valve is not working.

There is a small hole in the water intake network, does it have anything to do with this?

It's okay to wash normally, but after washing, the water will automatically enter and the water will not drain, so the water will always enter the water, and the water will also enter after the power is off.

Hello, you check if the inlet pipe is blocked, and also check the drain valve.

If the water inlet pipe is blocked, it will not enter the water, as long as the faucet is not turned off, the water will always be in.

It is recommended that you check whether the drain valve can be done normally, or you can contact the maintenance personnel to come to the door to test, if the water does not enter the water is the problem of the water inlet valve, if the water can enter normally, then it is not the problem of the water inlet valve. If you can't drain the water, it is recommended that you check the drain valve, turn off the washing machine, and reconnect it after 5 minutes to see if it can return to normal.

Good. Good.

You're welcome and I wish you all the best.