Whole house customization, why do businesses like to use particle board? How do you choose?

Because of the low cost of particle board, the things made are relatively better than those made of solid wood. Because they have a layer of skin on them. Therefore, it is recommended that you buy solid wood, and the solid wood should be environmentally friendly.

Custom wardrobe should be popular from abroad, in recent years it is very popular in China, this question is that some big brands are actually inaccurate should be most brands are using particle board, the following is specific:

The environmental protection mentioned here is relative to the entire natural environment, because the particle board is composed of wood pellets, which has low requirements for the wood itself, which can make full use of the wood and reduce the waste of resources. The state is more encouraging and supportive.

Many large manufacturers have their own independent research and development of particle boards, and the cost of particle boards is cheaper than ecological boards, multi-layer boards, and solid wood boards, or even cheaper. This is also the most important factor that many brands consider. Due to the nature of particle board, it is easier to process, and the operation is relatively simple, which is suitable for factory mass production.

Particle board can be processed with higher precision than other sheets. Summary: Custom furniture selection particle board from the performance of stability, good grip, a certain moisture-proof function, plus the popularity of custom furniture mainly lies in the "customization" it can be more owners to customize the furniture full of personality.

Da Cui suggested: There is no problem with moisture-proof particle board, but it is not waterproof, and it is not recommended to use it in the kitchen. Particle board custom furniture must choose a big brand, because the particle board environmental protection of small manufacturers is not enough to guarantee, and the processing equipment and technology such as edge sealing are defective.

Because the brand wardrobe due to advertising, franchise fees, as well as the entire marketing costs, store personnel costs, the cost itself is higher than the general non-brand, if you use solid wood multi-layer, or ecological board, the cost is higher, it is not easy to sell. The marketing strategy of the brand wardrobe is that the big brand, the machine is good, the production is fine, the installation is fine, and the service is considerate, and they weaken the proportion of this plate in the wardrobe design. This is their marketing strategy.

Therefore, each brand has its own marketing strategy, and the words of large companies are to avoid the important and light, give full play to their advantages, and weaken their disadvantages, so as to be invincible in the market competition.

Merchants prefer to use particle board because the cost of particle board is relatively low, and merchants can make more profits. When choosing your own decoration materials, you can choose according to the actual situation, if you want to save costs, you can use particle board, if you pursue the actual effect, you can choose log boards.

Choosing particle board is much more profitable than choosing eco-board. In fact, this mainly depends on the production cost of the plate itself. The production cost of particle board is low.

I really don't know, I haven't understood, and many people have big questions about this issue.

Although there are a variety of boards on the market, it is not difficult to find that the entire custom business basically uses particle boards. Many people think that particle board is the worst material, and they all say that particle board is not good, why do custom companies also use particle board? Especially well-known brands, but unknown small brands will use eco-boards, multi-layer boards.

Why do custom merchants commonly use particle boards? The characteristics of this material are not easy to deform, cracking is also difficult to occur, although the moisture-proof ability is average, but it is not the worst, the general customized cabinets are cabinets, bookcases, etc., not easy to contact water, and as long as there is no problem with the edge banding, there will be no water, so the characteristics of the particle board moisture-proof difference can be ignored.

<> the cost is not high, in fact, particle board has been available for a long time, but it has changed its name, and the raw material of this board is sawdust, so its cost is very low. And in terms of policy, the state is very supportive of the use of this kind of board, because it is very environmentally friendly, does not need to cut down a lot of wood, and protects the environment. As for the formaldehyde content, it mainly depends on what glue is used.

If a good glue is used, the formaldehyde content will not be particularly high, and the edge banding of the board can also reduce the formaldehyde content. The difficulty and cost of mass production of other plates will be relatively high, and the first will naturally be high. Now the ** of custom cabinets is not cheap either.

If the ** is high, no one wants to customize, and it will not be able to do business. Particle board, on the other hand, guarantees maximum profits, and it is not only easy to produce, but also relatively inexpensive, which most people can afford. Therefore, particle board is the first choice for whole-house customization.

After all, particle board can not be used.

Now the ** of custom cabinets is not cheap either. If the ** is high, no one wants to customize, and it will not be able to do business. Particle board, on the other hand, guarantees maximum profits, and it is not only easy to produce, but also relatively inexpensive, which most people can afford.

Therefore, particle board is the first choice for whole-house customization. After all, particle board can not be used, this kind of board is not as bad as we imagined, and because of its own characteristics, it is used to customize cabinets In fact, this kind of board is not as bad as we imagined, and because of its own characteristics, it is indeed very suitable for custom cabinets. As long as we choose a well-known brand of particle board, there will be no big problem with the quality, such as the imported brand of love particle board, its quality is very good.

The first is that the profit is high, and the second is that it is not easy to deform. Particle board is made by pressing broken wooden boards together, and the internal structure is generally horizontal and vertical, so the force is relatively uniform, and the temperature of the board will also be improved.

The deformation resistance and grasping force of particle board are better than other boards, but the moisture-proof and waterproof performance is lower than that of multi-layer boards, but for the current customized cabinet, they are all three-in-one fasteners, and they are not partition walls on site, so its physical defect performance can be ignored.

The whole house is customized with particle board because the board is not easy to deform, the cost is not high, and it can be mass-produced.

1. The nature of the plate.

The board of particle board is not easy to deform, and it is difficult to crack, although the moisture-proof ability is average, but it is not the worst, the general customized cabinets are wardrobes, bookcases, etc., and it is not easy to contact water, and as long as the edge sealing is no problem, it will not enter the water, so the nature of the moisture-proof difference of the particle board can be ignored.

2. The cost is not high.

In fact, particle board has been around for a long time, but with a different name, the raw material of this board is wood chips, so it is said that the cost is very low. And in terms of policy, the state is very supportive of the use of this kind of board, because it is very environmentally friendly, and there is no need to cut down a lot of wood to protect the environment.

3. It can be mass-produced.

The difficulty and cost of mass production of other plates will be higher, and naturally it will be higher, and now the custom cabinet is not cheap, if it is higher, no one is willing to customize, and it is impossible to do business.

Particle board, on the other hand, is profitable, easy to produce, and relatively inexpensive, making it affordable for most people. Therefore, particle board is the first choice for whole-house customization.

How to choose a particle board

1. Observe the appearance.

When choosing a plate, the most intuitive thing is its surface, you can carefully check whether the plate has rotten places, whether the surface is flat and smooth, and whether there are cracks on the plate is also very important. If the above problems occur, then the quality of this plate is definitely not good.

2. Observe the color.

Good quality particle board, its plate color will be more uniform, the same board will not appear on the color of the situation, and will have a certain luster, if the surface color can not be uniform, it means that the quality is definitely not good.

3. Environmental protection.

In fact, the quality of the particle board, the environmental performance is also very good, when we go to buy the board, we can ask to see the environmental protection certificate of the board, through the environmental protection certificate, you can also judge whether the environmental performance is good, if the environmental protection is poor, the quality will not be too good.

There are several reasons why solid wood particle board is widely used by whole house custom brands.

1. The decorative performance is relatively strong.

The surface of the particle board is smooth and delicate, without knots, insect eyes, no warping, no cracking, and has the advantages of high physical and mechanical strength, equal longitudinal and transverse strength, sound insulation, mildew prevention, economy, and heat preservation. It is more decorative than other woods.

2. The warpage is not easy to deform.

Solid wood particle board has small warpage and deformation, good dimensional stability, high strength, good stiffness, and is not easy to bend when hanging heavy clothes. The wood-based panels used in the European furniture market are mainly solid wood particle boards.

3. Strong nail grip.

The inside of the solid wood particle board is a granular structure of cross and staggered structure. Therefore, the nail grip is strong, and round nails and screws can be nailed. These machinability properties are significantly better than MDF, but there is still a gap compared to solid wood furniture.

4. Good processing performance.

The density of solid wood particle board is generally greater than that of solid wood, and the physical and mechanical properties are excellent, and it is better than natural wood in all kinds of wood-based panels. Therefore, the machine has excellent processing performance, and can be processed with the processing configuration and essentials of processing natural firewood. The solid wood particle board is a granular form of cross staggered layout, the particles are arranged in a certain direction, and its longitudinal bending strength is much larger than the transverse one, which is a significant feature and can be sawed, sanded, planed, drilled, nailed, filed and other processing, which is a good material for the furniture industry.

The last and perhaps most important reason is the low cost, which can be seen from the structural composition of the solid wood particle board, which is not expensive to manufacture and environmentally friendly, so it is used by many custom brands or processing plants.

1. The particle board is made by pressing the broken wooden board together, the internal structure is generally horizontal and vertical, so the force is relatively uniform, and the temperature of the board will also be improved, so the particle board is generally not easy to deform, and it is not easy to crack, even if the moisture-proof performance is general, but it is not the worst, and the whole house customization is generally only a custom wardrobe, bed, bookcase, etc., these furniture are generally not much contact with water, as long as the particle board is well sealed, It is not easy to get into the water. 2. The cost is not high, the particle board is made of sawdust, its production cost is generally not high, and there is no need to cut down a lot of wood, and in the production process, the glue added is relatively low, so the environmental protection is also better, so it is very normal for manufacturers in our country to use this material to produce furniture, in addition, the board generally adopts the edge sealing process, so the formaldehyde content will be reduced. 3. Mass-produced particle board is made of wood chips, which is relatively easy to produce, and the production cost is relatively low.

4. Convenient processing particle board is made of wood chips through hot glue pressing, if the manufacturer wants to carry out complex and exquisite modeling processing on the particle board, it is also very convenient, and the processing difficulty is not as big as the solid wood board, so it is loved by various whole house custom manufacturers.