Chevrolet Cruz hatchback hand automatic integrated new car break in period precautions

How does a new car run in? Hello, let me ask you this question: 1. The run-in period is generally divided into three stages, the first stage is generally considered to be 0-1000 kilometers, that is, this stage should keep the speed can not be too high, generally not more than 80 yards is appropriate, the speed can be initially run-in in this period, basically 0-4000 rpm should be properly run-in, and the throttle should not be too heavy.

2, the second stage of 1000-3000 kilometers, this period, the speed can still not exceed 80 yards, the speed continues to run-in, the throttle can be appropriately added some kilometers - 5000 kilometers, during this period can be the first insurance, the first insurance after the high-speed, that is, between 80-120 or 130 yards, each speed of the car can be used at a constant speed for more than ten minutes, at this time the throttle can be used as much as possible, there is no clear requirement for the speed, personal recommendations do not exceed 4500 revolutions. 4. The time of the first insurance can be carried out within 5000 kilometers after 3000 kilometers. 5. Pull the high-speed, 1 time 2 times is enough, there is no need to go to Dora, I personally recommend to do the first insurance, and then pull the high-speed, of course, there are also 4S recommendations to pull the high-speed first, and then do the first insurance, in fact, they are all the same.

If my answer is helpful to you, please set it to.

Do not exceed 3000 engine speed, do not exceed 80Don't brake and accelerate sharply, thank you.

Precautions for cars during the run-in period.

The run-in period refers to the time required for a new car to run in under low load conditions in order to make all parts of the engine run in smoothly after leaving the factory. The run-in period refers to a certain initial mileage, generally 3000 3500 km. The running-in period of the car is equivalent to the warm-up exercise before the exercise, and the purpose is to adjust and improve the ability of various parts of the body to adapt to the environment.

The quality of the car run-in will directly affect the life of the car, safety and future maintenance costs. The break-in period of the car must be improved through correct operation and regular inspection. During the run-in period of the new car, the surface of the parts is rough and the gap between the two parts is small, if the new car is at high speed or overweight driving, it will cause damage between the parts due to wear.

Maintenance skills: During the run-in period of the new car, try to choose a better quality road surface to reduce the load on the body and power system. 1. Avoid overload driving The loading capacity of the car during the run-in period cannot exceed 75% of the rated load.

When loading, the new car should be lower than the specified load capacity and number of people, let alone overloaded. Overloading can burden the engine, transmission, drivetrain, suspension and other components and accelerate wear and tear. Generally speaking, domestic cars cannot exceed 75% of the rated load, and imported cars cannot exceed 90% of the rated load.

In addition, in order to reduce the load on the body and power system, a relatively flat road surface should be selected to avoid vibration, collision or emergency braking. 2. Do not drive at high speed There is a speed limit during the run-in period of the new car. Generally speaking, domestic cars are within 40 to 70 km/h, and imported cars are generally within 100km/h.

Ensure that the engine speed and vehicle speed work at medium speed, in general, the engine speed should be 2000 4000 rpm during the run-in period; Do not run long distances, the car runs long distances during the run-in period, and the continuous working time of the engine will increase, which is easy to cause wear and tear of parts. In addition, you should change gears in time when driving to avoid driving at low rpm in high gear and high rpm in low gear. Generally speaking, the speed of each gear is controlled in the range of top speed 3 4; During the run-in period, the car should also pay attention to not doing emergency braking as much as possible, and strive to start slowly and stop slowly.

3. Use high-quality gasoline The gasoline used in the run-in period of the new car should not be lower than the label specified by the manufacturer, and the anti-wear oilseed should not be added, so as not to have enough mileage and insufficient run-in. In addition, by correctly adjusting the ignition system and the oil supply system, it is possible to solve the changes caused by the vacuum economizer caused by the installation of speed limiting plates, and improve the economy of the running-in period. In addition, proper driving also includes gently lifting the clutch and accelerator pedal when starting.

Vehicles in the run-in period should be inspected frequently in normal times to find problems in advance and eliminate them.

1.Engine oil, cooling water, tire gas, etc., must be sufficient, no leakage occurs, and should be replenished in time when a deficit is found.

2.If there is an abnormal sound in each part, it should be repaired in time, and the impact of mechanical failure during the run-in period on the vehicle is often much greater than that of the vehicle that has passed the run-in period.

3.Generally, there are warning lights in the dashboard, and some cars even have computers installed on them. Only by discovering the alarm information in the dashboard and computer in time can we better control the condition of the vehicle.

4.The loading quality of the vehicle in the running-in period must not exceed 70% of the rated load capacity, and the full load and overload will cause great damage to each component of the new car.