How to clean and maintain the crystal chandelier? How to maintain and clean the crystal chandelier?

How to clean a crystal chandelier.

1. Clean with water.

The daily use of clean water can clean the crystal lamp, after all, there is no special oil stains, more dust. When scrubbing, it is necessary to pay attention to the metal fittings on the crystal lamp not to be exposed to water for too long, otherwise there will be a hidden danger of rust and it will become very unsightly.

2. Wipe with a soft cloth.

If the crystal lamp at home has just been used for a long time, there is not a lot of dust on it, you can gently wipe it with a soft cloth, and you don't need professionals to remove the chandelier when operating, stand in a high place, and gently wipe it with a cotton cloth, and pay attention to personal safety here.

3. Kerosene cleaning.

Many people will not receive kerosene, how to clean it? In fact, kerosene is a good solvent, and stains can be easily removed with it. When cleaning, you need to disassemble the crystal chandelier according to the parts, soak them in kerosene one by one, soak them for 5-10 minutes, and then gently wipe the surface of each part with a soft cotton cloth, then you can see that the stains have been fully dissolved, and finally wipe them with clean water when all the stains have been removed.

How to clean a small or medium-sized crystal lamp, at least 2 people to complete it:

1. First of all, you need to turn off the power at home, which is to ensure the personal safety of cleaning;

2. Prepare ladders, special detergents, dry and wet cloths and basins of the required height before cleaning;

3. It is best to lay waste blankets or soft cushions on the ground to prevent the crystal lamp from accidentally falling and dust from falling;

4. According to the installation instructions, take off all the crystal balls on the crystal lamp, and then use a dry cloth to wipe the main lamp stand, and be sure not to wipe it with a wet cloth to prevent some metal bracket accessories from rusting after encountering water;

5. Pour water and special detergent (kerosene is also acceptable) into the crystal ball in the basin, soak it for a period of time, and then wash and dry it one by one;

6. Finally, according to the installation instructions, install the crystal ball back in its original position;

To clean a large crystal lamp, you need to first put a special detergent in a high-temperature steam spray, spray it evenly on each surface of the crystal beads, wait for 3 to 5 minutes, and then use the spray full of water to clean the crystal lamp.

If there are a lot of crystal balls, it is best to use a micro-mist cleaner to clean them to prevent the crystal balls from being damaged. After sufficient cleaning, the dust and oil stains on the crystal lamp can basically be disposed of, and finally just wait for it to dry completely (or use a professional hair dryer to dry).

1. Wipe the crystal beads: When wiping the beads, be sure to use a soft cloth dipped in water diluted with dish soap, and gently wipe the front and back of the crystal beads at the same time (you can't pinch the beads and pull them down when wiping, so as not to tear off the beads).

2. Keep the lamp body balanced: If you want to remove all the bead strings and clean them, large lamps and lanterns should pay attention to the balance of the lamp body when disassembling the bead strings, and do not disassemble one side and then the other side to cause the lamp body to tilt, resulting in the deformation of the lamp body or outer frame.

3. Wipe the bracket accessories: When wiping the bracket and accessories, the soft cloth should not be wet, especially not the alcohol water, so as not to damage the protective film outside the electroplating layer and affect the surface gloss effect of the light stand.

4. Cleaning of the bulb: When wiping the lamp stand, cut off the power supply, and remove the bulb and wipe it clean before installing it. The bulb should be puffed in moderately, too loose will produce poor contact; Too tight and you may screw the bulb.

If you want to get the most out of your crystal lamp, it's best to choose a plain transparent bulb instead of a frosted or colored bulb.

5. Replace accessories in a timely manner: It is found that the connecting buckle of the beads is rusty and discolored, one is not beautiful, and the other is easy to be brittle, so it is best to replace it by the way. If a defect is found, it should be made up in time.

6. Precautions: Do not rotate the lamp body when cleaning the lamp, so as not to loosen the screw teeth and cause accidents.

7. Check the connecting parts: the firmness of the connecting parts of the lamp body should be checked at the same time, and the screws found to be loose should be tightened smoothly, and the spirals with the risk of slipping teeth should be replaced immediately to ensure safety.

8. Keep the bead string flat: when cleaning the bead string (especially the upper and lower net parts), if it is found that the bead string is twisted with a spring buckle or an elliptical buckle, this phenomenon is prone to occur), and it should be adjusted to the flattening effect. If it is connected with a flat "butterfly buckle", pay attention to the front of the buckle should be consistent outward, and the joint should be inward, so as to be beautiful and unified.

If you have kerosene at home and an old toothbrush that you have discarded, these two things are the best way to deal with the stubborn dirt on the surface of the crystal. Before cleaning, you must carefully remove the crystals one by one, soak them in kerosene, and then gently wipe the surface of the crystal with a toothbrush, and after the dirt on the surface has slowly softened, you can use laundry detergent to wash the crystal blocks.

Spray with a special cleaner.

If you find it too laborious to clean the crystal balls one by one, you can also choose to buy a professional cleaner, so that if you spray the crystal light with detergent, the dust from the crystal ball or crystal chips will be carried away as the liquid evaporates.

Dilute the water in the sky, it has a special effect on the cleaning of metal lamp stands, but it should be diluted, not too much, it is a chemical product, and it is necessary to pay attention to the light after volatilization, and it can not be close to the fire. Wipe the lampstand with a cloth dipped in the water and wait for about five minutes before dipping the cloth in wine.

Fine or diesel is wiped clean, one side plays a clean cleaning, and on the other hand, it plays a role in rust prevention.

If possible, power off, remove, wash one by one, wipe dry, and recover, but it is a bit laborious and time-consuming. Be careful.

Pay attention to electricity safety. Protective measures are required for climbing.

To clean the crystal lamp, you need to buy a special detergent, you can't use homemade ordinary detergents, and clean water can't remove the stains on the crystal lamp well, and you can't restore the brightness of the crystal lamp.

During the cleaning process, the crystal lamp should be cleaned with clean water first, and then the detergent should be sprayed on the crystal beads, the detergent will soften the stains on the crystal beads and restore the crystal lamp to its original brightness. Finally, scrub it with a clean rag and you're good to go!

In addition to specialist detergents, you can also use kerosene. Use an old toothbrush dipped in kerosene to scrub the lamp to clean the stains from the lamp.

In addition, you can also ask a professional to remove the crystals one by one, and wipe them with kerosene after soaking them for better results. After the kerosene is cleaned, then use laundry detergent to scrub it again, and finally clean it with water.

If the economic conditions at home allow, it is recommended to use high-end crystal beads, the higher the grade of crystal beads, the better the dustproof effect, and it will be easier to clean.

Chandeliers have a variety of design styles, and the new type of chandelier is very popular in contemporary society, it gives people an elegant and fashionable feeling, and can improve the interior decoration level of the residence, so it is favored by everyone. During the use of a new chandelier, everyone must do a good job in the daily maintenance work to avoid damage. So, how do you take care of a chandelier?

Let's take a closer look at the following description!

1.Please refer to the instructions for use.

After buying it back, you should follow the actual operation instructions to prevent risks.

2.If there is a problem, please replace it in time.

When it is found that the LED tube on both sides is red, the LED tube is black or has a shadow or the LED tube cannot be opened, the LED tube should be replaced in time to avoid unsafe situations such as electronic ballast burning.

3.Do not change the structure of the fixture.

Do not change the structure of the lamp, disassemble and replace the components at will. After cleaning and maintenance, install it in its original condition and do not install too many or wrong fixture parts.

4.Don't switch power sources too often.

Do not press the power switch too often. At the moment of frequent start-up, the current will exceed all the currents for normal operation, which will greatly increase the temperature of the tungsten wire and greatly reduce its service life.

5.Proper care.

Improve maintenance for longer life. 1.Wipe the lights in the room with a damp cloth to prevent moisture from entering; 2.

Toilets and showers with waterproof lampshades, otherwise it will reduce the service life; 3.The lamps and lanterns in the restaurant kitchen should avoid smoke, and the accumulation of oil will affect the color of the lamps; 4.Light gray porcelain lampshades have good light transmittance and are easy to stain dust, so they should be scrubbed frequently to prevent affecting the light source; 5.

The lamps are non-metallic materials and can be wiped with wet water to prevent dust from accumulating and affecting the actual effect of the lamps.

Moisture and cold can easily cause the fixtures to rust, fade and reduce the time of use. In the restrooms, shower rooms and kitchens of restaurants, it is very important to install waterproof lampshades for headlamps so that moisture intrusion, rust or short-circuit failures can be avoided.

Do not use clean water to clean the lamp, but use a dry towel to scrub with water. If you accidentally touch water, wipe it as much as possible. Do not scrub with a damp towel immediately after the light is turned on.

Wipe the crystal beads: When wiping the beads, be sure to have a soft cloth dipped in water diluted with dish soap, and gently wipe the front and back of the crystal beads at the same time (you can't pinch the beads and pull them down when wiping, so as not to tear off the beads).

When wiping the light stand, cut off the power supply; The light bulb should also be removed and wiped clean before putting it back on; The bulb should be puffed in moderately, too loose will produce poor contact; Too tight and you may screw the bulb.

If you want to remove all the bead strings and clean them, large lamps and lanterns should pay attention to the balance of the lamp body when removing the bead strings, and do not dismantle one side and then the other side after dismantling and cause the lamp body to tilt, resulting in the deformation of the lamp body or outer frame; It should be disassembled with front, back, left and right.

1. Wipe method. After using the crystal ball for a long time, a layer of dust will appear on the surface. In this case, simply wash with water, stand on a high place, and gently wipe with a clean, soft cotton cloth.

There is no need to use water or other penitential cleaners to restore the crystal dome chandelier. When wiping, please be careful to gently hold the crystal ball chandelier and pay attention to your own safety.

2. Clear water method. A simple wipe will not remove dust from the crystal ball chandelier, and some smudges are more stubborn due to the heat of the lamp. The main ingredient is still dust, so it can be washed with water.

In this case, it is best to carefully disassemble the crystal ball chandelier and scrub it with a damp cloth several times. When scrubbing, be careful not to let the metal fittings on the crystal ball chandelier come into contact with water for a long time, so as not to rust and affect the appearance, or even cause safety hazards.

3. Kerosene method. In addition to some dust, there are some other stains on the crystal ceiling, which kerosene also works well and is easy to remove. Prepare a small bowl with a shallow bottom and hold about two-thirds of the kerosene, then disassemble the crystal chandelier according to the parts, soak them in kerosene separately, and gently wipe the crystal parts with a clean soft cotton cloth for 5-10 minutes.

On the surface, you can see that the stain is completely dissolved and can be easily wiped off. Once all the stains have been removed, use neutral Wild Void Soap to form soapy water, then use a soft cloth to repeatedly clean the crystal chandelier filled with kerosene, and finally wipe it with water.

The crystal chandelier at home has been used for a long time, and it is easy to get all kinds of dust on it. What are the precautions for cleaning the crystal chandelier? PChouse will take you to find out.

1. When cleaning the crystal lamp, the crystal lamp should be removed first, and it is best not to clean it directly on the hanging crystal lamp, which is easy to cause safety accidents. If you feel troublesome and have to clean it directly on the hanging crystal lamp, you need to cut off the power supply of the crystal lamp first, in case water accidentally enters the circuit when cleaning the crystal lamp, resulting in short circuit and electric shock accidents. After cleaning, wait until the water droplets on the surface of the lamp are completely dry before turning on the power.

2. When cleaning crystal lamps, it is best to choose professional crystal lamp cleaners to clean them. Because the brightness of the crystal lamp is due to its crystal clear material, if the surface of the crystal lamp is damaged due to the use of incorrect detergent to clean, it will affect the brightness of the crystal light. When using detergent to clean the crystal lamp, you can first pour the detergent into the watering can, and then use the watering can to spray the detergent evenly on the surface of the crystal lamp, and then gently wipe the appearance of the crystal lamp with a toothbrush, and then wipe the surface of the crystal lamp with a damp rag after the dust on the appearance is soft and loose.

3. When wiping the bracket and accessories of the crystal lamp, it is best not to get the rag wet, so as not to damage the protective film on the surface of the electroplating layer and affect the surface gloss of the lamp stand. If you find that there is rust in the accessories, you should replace them in time to prevent failure in subsequent use.

1. First of all, the crystal should be cleaned regularly. Crystal is more resistant to dirt than finger burning, and its cleaning frequency is not easy to be too high.

2. Secondly, the crystal lamp should be maintained regularly. In addition to cleaning the lamp regularly, you should also have regular check-ups to maintain it. The inspection is mainly to see whether the lamp stand and light source of the crystal chandelier are rusted or loose, and the internal light source and the corroded lamp stand of the crystal chandelier are replaced in time.

3. Finally, pay attention to the taboos of crystal lamp maintenance. The crystal lamp is different from the bedroom table lamp at home, and the crystal lamp body should not be rotated during the ordinary use and cleaning of the crystal lamp, so as not to loosen the screw teeth, which will cause unsafe accidents.

The crystal chandelier is delicate and delicate, and it needs the careful care of my daily teasing fighters to use it for a long time.