How to install a crystal chandelier? What do I need to pay attention to during installation?

I think the decoration of the whole family is really very important, many people will choose the crystal lamp, because the appearance of the crystal lamp is more atmospheric, which can highlight the decoration of the whole house is more advanced, but there are many precautions when installing the crystal lamp, you may not know yet, then we will find out today. <>

First of all, we must pay attention to its weight when installing the crystal lamp, do not choose the kind that is too heavy, otherwise it will not be able to bear it at that time, and it may fall down more dangerously, that is, when installing, we must let the master remember to bring gloves, because if the hand touches the filament, it is easy to oxidize in the future, and it is not easy to clean, after the installation is completed, we must shake it to see if he is fixed, if the screw is loose, it is quite dangerous, and it must be confirmed repeatedly in this regard. <>

That is, all the lamp interfaces must be installed and tested for high voltage, because if there is leakage, it will be more troublesome, but I think ordinary families should not install crystal lamps, only the kind of villas or a few floors in the countryside will be more suitable, like our bungalow height is not enough, the installation of that kind of lamp may not be very good-looking, and one point is that all the interfaces must be sealed with glue, so as not to leakage after the test.

Anyway, this kind of thing according to personal preference, if you like the crystal lamp, you can choose the kind of smaller one in the ordinary commercial house, the general crystal lamp with European style is better-looking, because I am lazy, usually do not like to do hygiene, European furniture is particularly difficult to take care of, health is not caught, and the crystal lamp is difficult to dismantle, every year may have to invite professional people to come to dismantle and wash, let us like ordinary families forget it, basically the health is their own, so it is more suitable for me to choose ordinary simple furniture, of course, Everyone's preferences are different, if you like it, you can also buy, but there are a few things that need special attention when installing, all the lights are installed after sure to confirm whether the power is good. <>

Find a professional decorator to install it. Pay attention to the roof, pay attention to the lights, pay attention to the installation method, pay attention to the safety of the decorator, and turn off the electricity.

When the crystal chandelier is installed, it needs to be supported by someone, first, several people install it together, second, be careful with the parts, third, fix the place, fourth, individual parts can be installed at the end, and fifth, handle it gently.

The ceiling is a concrete perforated slab. How to install a crystal lamp depends on what style of crystal lamp you have. If it is a simple series, it is generally not very heavy, and you can consider installing.

If the whole light is too heavy and not allowed to be installed on the ceiling of the prefabricated panels, it will cause a great safety hazard, even if. How to install a small crystal chandelier installation precautions: If you install multiple chandeliers, pay attention to their position and length relationship, the position and height of the lamps can be adjusted according to the chandelier joists.

There are generally installation instructions. My house used to be reinstalled with crystal chandeliers. I installed them as instructed.

It's not troublesome, but we should pay attention to safety. Gave you some notes, so the answer. Before installing the chandelier, check that the purchased lighting parts are complete.

Lighting accessories are generally composed of round, semicircular and square metal plates that are in direct contact with the ceiling plate and the wall, which are the bridges connecting the wall and the main body of the lamp), and the hanging plate (the hanging plate is usually placed on the ceiling plate when leaving the factory, which is composed of a bridge and a back strip connecting the ceiling plate and the wall.

The roof of the hanging plate is generally made of cement or masonry, and should be fixed with embedded hooks, bolts, screws and expansion bolts. At this time, it is necessary to pay attention to the bearing capacity of the fixing nut to match the weight of the crystal chandelier. Use an electric drill bit to fix the expansion screw in the hole position, do not deviate from the position, keep the arm straight, and do not drill obliquely.

Use the mounting screws in the fixture to place the baffle into the expansion screws. Be careful not to kill one side first, but tighten both sides in turn to ensure the balance of the hanging plate. You have to pay attention to the installation of the bulbs.

When various crystal chandeliers are installed in flammable structures such as wooden chandeliers or flammable materials on the roof, they must be insulated and fireproof. When installing the bulb, the wiring should be connected to the terminal of the center contact and the neutral wire should be connected to the screw terminal. When the lamp adopts the screw head, the phase wire should be connected to the top center of the lamp head, and the neutral line should be connected to the screw head.

Remember to turn on the lights to see if there are any lights that are not on, and then do the debugging. Install the accessories. Wear crystal lamp bead curtains according to the installation drawings and hang accessories.

Glass tube crystal illumination must be handled with care. Check whether the lighting status and lighting effect of the crystal lamp are normal. If there is a problem with the multi-stage multi-switch crystal chandelier, it is usually a problem with the wiring or remote control, which should be carefully checked.

First install the keel, then install the basic parts on the keel, and then follow the other accessories of the crystal lamp step by step, connect the power supply, and then turn on the light to see the effect.

You should find some professional company to install it, this thing is also very troublesome to install, and it is easy to damage it by installing it yourself.

When the time lamp is installed, it must be installed according to the manual, and special tools must be selected, and the firmness of the crystal lamp must be paid attention to.

Common crystal chandeliers, the installation is very convenient, first take down the crystals, and then install the lamp holder, in the hanging crystal, so that the installation will be simpler.

At this time, it is necessary to distinguish the neutral line and the wire, and in the process of installation, you must check the key points, and you must choose the right terminal, and you can also seek the help of a professional electrician.

Crystal chandeliers have a high-end appearance, and many families will install chandeliers in the living room. But now many people don't want to go out and buy it, but they don't know how to install it after buying a crystal chandelier and coming back. I need to call the installer in person, in fact, as long as I master the skills, I can install it myself.

So how to set up the crystal chandelier? Crystal chandeliers have a high-end appearance, and many families will install chandeliers in the living room. But now many people don't want to go out and buy it, but they don't know how to install it after buying a crystal chandelier and coming back.

I need to call the installer in person, in fact, as long as I master the skills, I can install it myself.

Pay attention to safety when installing household appliances. One thing is to cut off the power. This is the basic, but also the guarantee of safety.

Check the weight of the crystal chandelier, there is also a lot of lighting such as crystal chandeliers, and it is very heavy, so I want to confirm whether the weight of the crystal chandelier can withstand it. If the weight of the crystal chandelier is about the same as the current lighting equipment, there is no need to change the ceiling junction box. If it is heavier, a new junction box should be purchased and installed to support the weight of the crystal chandelier.

When the load-bearing capacity of the fastening nut corresponds to the weight of the crystal chandelier, the expansion screw is fixed in the hole with an electric drill. Don't deviate from your position, keep your arms straight. Don't drill diagonally.

Place the wall panel inside the expansion screws with the mounting screws inside the fixture. Be careful not to die first, and tighten both sides in turn to ensure the balance of the planks.

When the balance plate is installed, the bulb is installed, and all kinds of crystal chandeliers must be insulated and fireproof when they are installed on the flammable structure. When installing the bulb, the wiring must be connected to the termination of the center contact and the neutral wire must be connected to the termination of the thread. When using a stud light, the merchant ship must connect the top of the light and the neutral wire to the stud.

Remember to install the bulb, turn on the light, confirm if there is anything bad, and then debug. The chandelier should not be set too low. To use a chandelier, the house must be tall enough.

Install the chandelier in the living room or dining room and don't hang it too short. It is appropriate not to look at the normal line of sight or not to the eye. Generally, the boom can be adjusted in height.

If the house is low, if you use ceiling lights, the house will look brighter and more generous.

The chassis is fixed sturdily and safely, and the basic requirements for the installation of lighting fixtures must be robust. When installing various lamps and lanterns, they should be installed in accordance with the requirements of the lighting installation instructions. When the luminaire weighs more than 3 kg, it should be installed using built-in hooks or with extension bolts directly from the roof with fixed supports.

Confirm that the load connection is secure. Generally, the rod of the chandelier has a certain length of screws, which can be adjusted in height. In addition to carefully checking whether the chassis is firmly fixed after installation, the lantern hanging under the suspension bridge should also pay attention to the reliability of the connection.

The installation method of crystal chandeliers is not very difficult. As long as you install it in the right way, there is usually no problem. However, it is necessary to pay attention to the safety of electrical appliances during the installation process, and also pay attention to a personal safety issue.

First of all, it is necessary to determine the installation of **, pay attention to the size of the room and the crystal chandelier. Generally, crystal chandeliers are installed in the living room, and a large enough chandelier will make the whole room more high-end atmosphere. But if a large crystal chandelier is installed in a small room, it will look too crowded.

Install with nails and make a few screw holes in the ceiling so that the chandelier can be fixed there.

First of all, we must clearly know the weight of the crystal lamp, and then design the circuit, after cutting off the power supply, install the bracket first, and after the bracket is installed, you can hang the crystal lamp.

Pay attention to the firmness of the chandelier, and at the same time choose a particularly good-looking style, and put it in the right place on the roof, and find a professional installer to install it.

Such chandeliers must be installed by professionals, and this installation is very important, taking into account the load capacity, otherwise it is easy to be dangerous.

Whether it is the living room, kitchen, bedroom, or bathroom we need to buy lamps and lanterns, in the purchase of living room lamps, in order to make the living room more magnificent, some people will choose crystal chandeliers, the following pchouse will tell you about the installation precautions of crystal chandeliers.

1. The weight of the lamp must be considered, and when the weight of the chandelier is greater than 3 kg, it should be fixed with embedded hooks or bolts; When the weight of the soft line chandelier is greater than 1 kg, the lifting chain should be added. That's right.

2. Gloves must be worn when installing or testing lamps to avoid rust and reduce their service life; The installation hardware must be firm, there is no swing, shaking, and each screw should be locked with a wrench to prevent the lamp from loosening during installation.

3. The mouth of the threading hardware of the lamp head must be plugged with rubber particles or yellow wax tubes to prevent the front edge of the wire hardware from scratching the wire, resulting in leakage of the lamp.

4. All lamps and lanterns must be connected to the wire, and all the lights must be tested and the high voltage test must be done.

5. The general rule of the installation height of the crystal chandelier is that its bottom should be hung more than 30 to 36 inches from the tabletop, which is just enough to illuminate the room and will not interfere with people's sight.

Crystal chandelier is a very popular decorative material when home decoration, the crystal chandelier installed in the living room looks elegant and atmospheric, very charming, sometimes we need to install the crystal chandelier ourselves, some friends should be at a loss, do not know what to pay attention to. Today the main thing is rightCrystal lamp repairWith the analysis of the knowledge and characteristics of the cleanup, the customer can choose from various aspects.

First, the crystal lamp repair and installation precautions:

1, Weight is the first thing to consider when installing a crystal ceiling, when the weight of the chandelier exceeds 3kg, it should be fixed with a recessed hook or bolt. When the weight of the chandelier exceeds 1kg, a sling should be added.

2. The installation height of the crystal chandelier is generally that its bottom should be hung at a height of 30 to 36 inches from the tabletop, which can only illuminate the room and will not interfere with people's sight.

3. During the installation, please make sure that the handle of the switch and the lamp head cannot be exposed to the metal, so as not to cause electrical safety, and make sure that the lamp and line light are intact during the installation process. When installing, the neutral wire is connected to one end of the thread and the live wire is connected to the other end.

4, If you are not familiar with the installation of crystal chandelier, you can install the manufacturer's requirements and install the corresponding installation drawing. Also, in the process of installing the lighting, if you have any questions, you can contact the manufacturer. Try to make the installation process go smoothly and remember not to install haphazardly to avoid causing other accidents.

Second, how to clean a crystal chandelier?

1. Wipe method.

After using the crystal ball for a long time, a layer of dust will appear on the surface. In this case, simply wash with water, stand on a high place, and gently wipe with a clean, soft cotton cloth. There is no need to use water or other detergents to restore the crystal ball chandelier.

When wiping, please be careful to gently hold the crystal ball chandelier and pay attention to your own safety.

2. Clear water method.

A simple wipe will not remove dust from the crystal ball chandelier, and some smudges are more stubborn due to the heat of the lamp. The main ingredient is still dust, so it can be washed with water. In this case, it is best to carefully disassemble the crystal ball chandelier and scrub it with a damp cloth several times.

When scrubbing, be careful not to let the metal fittings on the crystal ball chandelier come into contact with the water for a long time, so as not to rust and affect the appearance, and even cause safety hazards.

3. Kerosene method.

In addition to some dust, there are a few other stains on the crystal ceiling, and kerosene stuffiness also works well on these stains and is easy to remove. Prepare a small shallow bottom bowl with about two-thirds of the kerosene, then disassemble the crystal chandelier according to the parts, soak them in kerosene separately, and then gently wipe the crystal parts with a clean soft cotton cloth for 5-10 minutes. On the surface, you can see that the stain is completely dissolved and can be easily wiped off.

Once all stains have been removed, use a neutral soap to form soapy water, then use a soft cloth to repeatedly clean the crystal chandelier filled with kerosene, and finally wipe it with water.

The above is to introduce to you all the content of crystal lamp repair, I hope you can decorate the decoration effect you expect.