What is the problem of the splash screen when the Apple 6 lock screen

Phone Splash Screen Reason:

1. The phone has turned on the automatic adjustment of screen brightness.

2. There is a compatibility problem with the running software.

3. There is a strong source of electromagnetic interference in the environment where the mobile phone is located.

4. The mobile phone display unit is faulty.

Exclusion method: Turn off the automatic brightness adjustment function of the mobile phone screen.

Uninstall or update incompatible software.

Use your phone away from strong sources of electromagnetic interference.

Go to the customer service center for processing.

If the screen color of the mobile phone is abnormal, such as black screen, splash screen, flower screen, white screen, red screen, etc., it is recommended to:

1.It is recommended to restart the phone to try: Press and hold the power button and the down volume button at the same time for more than 7 seconds to restart the device;

3.If it comes with system software, it is recommended to update the system version of the mobile phone to try: please go to Settings - About the phone (about the device) - Software update (system update) - Update (please back up the data in the device before upgrading).

If the problem persists, it is recommended to bring the purchase invoice, warranty card and mobile phone to the local mobile phone purchase office for repair or to a nearby mobile phone repair shop for repair.

Reasons why iphone6 suddenly has a splash screen:

1. It may be a failure caused by a plug-in conflict, recall the last software or plug-in installed before the failure, or see if there is a plug-in of the same type. Or take a look at the system requirements of the plugin in Cydia and remove the problematic ones.

2. The current generated on the surface of the screen.

3. The ROM of the brush does not match the mobile phone.

4. The radio baseband has not been upgraded.

5. Hardware problems, the mobile phone may be a refurbished machine, and the screen may be defective.

Causes and solutions for the splashing screen of the Apple mobile phone:

1. If the mobile phone cable is broken, it is the trapped Zheng Li cable connecting the screen and the motherboard that is burned or in poor contact, so it is good to go to the after-sales store to replace it.

2. The screen is broken and the screen needs to be replaced, ** higher.

3. The motherboard is broken, this probability is relatively small, but it is not ruled out that the solution is to replace the motherboard, which can be repaired by Apple.

4. If the problem still exists, it is recommended to bring your mobile phone to the regular Apple customer service center for inspection and maintenance.

Extended Information: Tips to Extend iPhone Battery Life:

1.Make it a good habit to recharge.

Charge the battery in time when the iPhone prompts a low battery to avoid automatic shutdown caused by too low a battery, and try to replace the battery if the battery efficiency is less than 80%.

2.Turn on Optimized Charging.

This function can intelligently learn and judge the user's usage and charging habits, so that the charging process is more balanced, thereby slowing down the aging of the battery and improving the battery life of the iPhone to a certain extent.

How to view: The "Optimize Battery Charging" function can be viewed in Settings - Battery - Battery Health

3.Disable background app refreshes.

Apps use battery life when running in the background. You can see how much time the app is running in the background. If an app runs out of too much power when it's not in use, you can disable background app refresh to prevent it from running in the background.

If the app is draining too much battery, we can also choose to uninstall it!

4.Enable Low Power Mode.

The "Low Power Mode" feature allows your phone to save more battery. When Low Power Mode is enabled, your screen dims slightly, restricting background processes, slowing down your processor slightly, or reducing the amount of energy your device needs during normal use.

How to do it: The easiest way to enable this feature is to swipe down from the top right corner of your iPhone and then the battery icon. Or you can enable the low power mode in the settings >> battery >> low power mode.

Push app notifications, email-read notifications, and more can all shorten battery life, so it's best to turn it off to make your iPhone last longer. Notifications can be turned off in "Settings" for each app.

6s Apple mobile phone screen flickering will seriously affect our use of mobile phones, so how should we solve this situation? Here are the reasons for the 6S iPhone splash screen that I have carefully sorted out for you, let's take a look.

In fact, many times it is caused by static electricity, and we can use the following methods to remove static electricity. Use the electrostatic electrostatic in the lighter to shock the screen (cover the malfunction with a paper towel stained with water to shock) and change the electric field, not all of which are applicable, so everyone should use them with caution.

Or use transparent glue to paste and tear on the screen until the screen regains touch, and pay attention to holding the phone when using this method to prevent the phone from falling.

There may also be a problem with the system settings, if your phone system is Android or above, then you can try to open the settings, click on the developer options to uncheck the "display screen update".

You can also turn off the auto-brightness option in the settings.

There is no way to troubleshoot any of the above, so it is best to take it to the repair point for repair.

What to do if the iPhone screen flashes in 6s.

1. Open your phone's settings and enter the display options.

2. Enter the brightness setting.

3. Uncheck Automatically adjust brightness. Well, so that the phone doesn't flicker.

What does this option mean, let me explain it to you. Auto-Brightness: This setting changes as the brightness of the environment changes.

When set to automatically adjust the brightness, cover the photometric sensor on the phone with your finger, and the phone screen will dim and brighten when you release it. Therefore, the sensor is that the lower the ambient brightness, the darker the screen, and vice versa, the brighter the screen. Another function of this sensor is that when you hit **, when the phone is close to the face, the screen will enter a "black screen" state.

What to do if your phone is splashing.

Cancel the display of screen updates.

If your phone system is Android or above, then you can try:

Settings-> Developer Options (or Developer Options) and uncheck "Display screen updates".

Adjust the screen brightness settings.

Settings-> Display-> Auto Brightness Adjustment, turn off this function.

Factory Reset Tools.

Mobile phone screen flickering can seriously affect our use of mobile phones, so when we encounter this situation, how should we fix it? The following is a list of reasons why Apple's mobile phone shines, let's take a look. In fact, many times it is caused by static electricity, and we can use the following methods to remove static electricity.

Use the electrostatic power supply in the lighter to shock the screen (cover the shock of the phone with a tissue moistened with water) and change the electric field, not all of which may apply, so please use it with caution. Or use clear glue to keep pasting, tearing, and biting things on the screen until the screen is touched again. When using this technique, it is necessary to pay attention to stabilizing the phone to prevent it from falling.

It could also be an issue with the system settings. If your phone's system is exceeded, you can try to open Settings, click on Developer Options, and uncheck Show screen updates. You can also turn off the auto-brightness option in the settings.

If the above fault cannot be eliminated, it is best to go to a maintenance point for maintenance. 1. Open your phone's settings and enter the display options. 2. Abandon the check box to automatically adjust brightness.

3. What does it mean to explain this option? It will change with the brightness of the environment. There is a light source sensor in the ordinary medium height (I found a ** on the Internet and made a mark, as shown in the figure.)

When set to automatically adjust brightness, cover the photometric sensor on your phone with your finger and the phone screen will dim and spread out to brighten. Therefore, when the ambient brightness is lower, the screen will be darker and on the contrary, it will become brighter.

The other function of this sensor is that when you hit **, when the phone is close to your face, the screen will enter a black screen state. Cancel the display of screen updates. If your phone system is above, then you can try:

Set Developer Options (or Developer Options) and uncheck Show screen updates. Adjust the screen brightness setting, show automatic brightness adjustment, turn off this function. Recovery ToolIf neither of these methods work, try a factory reset.

If it still doesn't work, it is recommended that it be best maintained. See if it's a hardware issue. Guess what interests you:

What does Big Boot Big Power Big Boot mean? 4.How to view apples.

Mobile phone hardware information5Apple iphone6s how to look at the hardware configuration 6How to clean up memory on iPhone7

【 1 】 In many cases, it can cause iPhone 6 to appear flickering screen, such as:

1) When the phone system is running slowly.

2 ) When updating to a higher level.

3) When you don't use your phone to disinfect viruses frequently.

4) When the version is not updated according to the normal procedure.

5) Improper handling of background applications, etc., will lead to the phenomenon of splash screen.

2. Solution.

1 Turn off the network on your phone first.

2 Perform four consecutive antivirus on your phone.

3 Turn off the phone again, and then turn on the phone after the battery plate on the back does not feel hot.

If the phone is stuck, you can try to clear the cache and restart it.

If the third-party software is caused by the software, you can delete and uninstall the recently installed third-party software.

If there is a problem with the hardware of the mobile phone, you can apply for after-sales inspection and replacement.

1. Turn off your iPhone6 phone and restart it after 10 minutes to see if it is resolved.

2. If the restart is invalid, turn on the phone, find "Settings" and click to enter.

3. After entering the settings interface, find "General" and click to enter.

4. After entering the general interface, find "Restore" and click to enter.

5. After entering the restore interface, click "Restore all settings" to solve the problem of splashing screen.

1. Install iTunes on your computer, and then open and run.

2. Connect the computer and Apple device with a data cable.

3. Press and hold the power button and home button of Apple products for 10 seconds. Then release the power button, press and hold the home button and wait for iTunes to recognize you.

4. If iTunes recognizes the device. Inside iTunes, you can see the option to restore your device.

5. As long as you choose to restore the device, then iTunes will reinstall the iOS system with iTunes.

6. If the reinstallation is still the same, considering the hardware failure, it is recommended to contact the official after-sales service center and the engineer will help check and deal with it.

Method 1: Turn the phone on and off once and observe whether the flickering screen disappears.

3. If the screen still flashes, restore the phone as follows: [Settings] - [General] - [Restore].

5. If the mobile phone system is not the latest version, you can try to upgrade, or flash the phone, this method can improve the compatibility of some applications, etc.

6. The problem has not been solved after flashing, it may be a hardware problem, it is recommended to send it to the maintenance point for maintenance, if the invoice is complete, you must go to the official maintenance point or direct store. If it is a new machine, it is recommended to apply for a return directly.

How to solve the mobile phone flickering screen, what to do if the Apple iphone6 screen flickering, the repair master will teach you.

Here's how to solve the problem:

1. The first thing to do is to restart your iPhone and press the "Sleep Wake" (also known as the power button) and the Home button at the same time until you see the Apple logo displayed on the screen.

2. Some users solve this problem by selecting "Settings" - "General" - "Reset" - Reset All Settings. The user will need to re-enter the password, change the wallpaper, and reset the Touch ID, but the user's data will not be deleted.

3. Users who encounter iPhone touch screen failure also solve the problem by restoring factory settings, but all the information on the phone will be lost, so users need to back up the important data in the phone in advance.

See if it's a problem with the settings and try again.

iPhone6s splash screen may also be caused by software problems, if it is caused by a third-party software application, try to uninstall it; Or if it's a system issue, try upgrading to a new firmware or re-flashing your phone.

Consider whether it is the problem of the screen itself, whether it has been dropped recently, it may be that the screen is broken, in this case, it will be sent directly for repair.

If you just bought a new mobile phone, you can apply for a replacement if you buy it on Apple's official website, and if you buy it on a third-party shopping platform, you can return it directly.

If the screen flickers only when you press the screen, it is estimated that the screen cable inside the machine is loose, and you can disassemble the machine and reinstall it.

If the touch screen fails, it can also be solved by restoring the factory settings, but all the information on the phone will be lost, remember to make a backup.

The cold rain and the river entered Wu at night, and Pingming sent the guests to Chushan Lonely.