-
It is recommended to reset the router and then reset the relevant parameters.
Line connection router and setup steps:
1. Connect the line between the network cable, the router and the computer, and start the computer and the router equipment;
2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) )
3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;
4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;
5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;
6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;
7. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;
8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.
9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.
-
There's a little thing on the back of the router that will automatically factory reset when you press it. Depending on the brand you are using, you can use your mobile phone to log in to the wireless router and set the password again
-
Here's how to reset the router.
-
1. Right-click on your desktop - Network - Properties.
2. Select the wifi network you are connected to on the network properties page.
3. Select the wireless properties button on the wireless network properties page.
4. On the Wireless Properties page, select the Security tab.
5. On the security page, you will see the password you set, but it is hidden, check the show characters checkbox.
6. OK, the password is displayed in plaintext, remembered.
7. If the system is win10, right-click your network connection in the lower right corner and select Open Network Sharing Center.
8. Select the status and change the adapter options.
9. Right-click on the properties of the connection and select Status.
10. Click the Infinite Attributes button on the status interface.
11. Select the Security tab in the attribute interface, check the display characters, and you can see the plaintext password.
-
Summary. To solve this problem, first check whether the network settings are correct, such as whether the wifi signal strength is enough, whether the wifi password is filled in correctly, whether the wifi security settings are correct, etc. If you still can't connect with the correct network settings, you can also try restarting your router or restarting your computer to see if that fixes the problem.
If it still doesn't work, you can try updating the wifi driver, or update the operating system to see if it solves the problem.
Hello dear, why can't the computer connect to wifi with the correct password, to solve this problem, first check whether the network settings are correct, such as whether the wifi signal strength is enough, whether the wifi password is filled in correctly, and whether the Jianying wifi security settings are correct. If you still can't connect with the correct network settings, you can also try restarting your router or restarting your computer to see if that fixes the problem. If it still doesn't work, you can try updating the wifi driver, or update the operating system to see if it solves the problem.
Dear, the reason why the password is correct but does not change the wifi: the router is malfunctioning. Multiple devices are connected at the same time.
Beyond the signal coverage Fan Qin's front perimeter. If the wireless network card fails, the hand is able to receive the wifi signal, thanks to the wireless network card in the mobile phone. It is also possible that the wireless network card is too old and has been eliminated, in this case, connecting to wifi will also have poor signal and poor connection.
Even when the ** comes, your wireless network will be disconnected. In this case, you can only take it to the repair point to repair it
Please make sure that you have installed the O-Band app on your phone, if not, go to the Cocoa Store and search for "O-Band"** to install it, and after installation, click on the O-Band icon to launch the program. >>>More
Solution: Steps:
store can be put first if it can't be opened after many attempts. >>>More
First, let's open your phone's settings.
Please click Enter a description. >>>More
Are you talking about computers or mobile phones? Here's how the computer does it (win 7): 1 First ask someone to enter the wifi password into it, connect Obviously, open the network and sharing center, and the wireless network is connected. >>>More
It is recommended to install the ASUS original wireless LAN driver. >>>More