What is the reason why the iPadmini3 always has a blue screen?

First, the iPad suddenly blue screen can't be opened, generally due to the conflict between the software and the system caused by the system crash, it is recommended to restore the system.

Second, the specific operation method:

Step 2: Connect your iPad to your computer with a cable.

Step 3: Press and hold the power button on the top of your iPad, and then slide to power off when the shutdown interface appears.

Step 4: Then please press and hold the power button to turn on, then the Apple logo will appear on the screen, do not release the power button.

Step 5: Then press and hold the home button on the home screen until the screen goes black.

Step 6: When the screen is black, please release the power button and the home button on the home screen until iTunes on the computer detects an iPad in recovery mode

Step 7: Press and hold the "Shift" key on your keyboard, click "Recover", and select the corresponding firmware to restore the system.

1. The display cable is bad - just replace the cable.

2. Hardware damage – check the hard drive.

3. There is too much software, and the machine is stuck - uninstall some software without it.

4. iPadmini3 overheats - just reboot after cooling heat.

In terms of cameras, Apple iPad

The mini3 tablet uses the latest Wi-Fi technology to double the connection speed and support up to 150Mbps network speed.

The reason why iPad mini3 has been white screen lately:

1: The network is not smooth and the latency is high.

2: Apple's servers are busy and cannot be connected temporarily.

3: The system network settings are incorrect.

It is recommended to restore network settings. Workaround:

1.Click "Settings" on the main interface of the machine and turn on "Airplane Mode".

2.On the Settings page, open General and select Restore

3.Select Reset network settings.

The reasons and how to deal with iPad mini2 booting on the blue screen and then restarting are as follows:

1. If there is a conflict between the program running at boot and the iPad mini2 program, you can use third-party assistant software to optimize the background program.

2. iPad mini2 memory problem, check how much space is left in iPad mini2 memory, you can delete the software that is not commonly used.

4. If the above methods do not work, it is recommended to connect to the computer to restore the system.

If the after-sales service is not due, it is recommended to check what is wrong, and the official is reliable.

I'm a little white.,Just a few days of contact with apples.。。。 I don't know what to use, I don't have the permission to send **.,I can only wait to earn some points to sticker.。。。

I'm in the same situation, can I only take it for repair? It didn't take long to buy it.

It's the same with me.

1.Shuangqing data can solve such problems;

2.Reinstating the appearance settings can solve this problem;

3.Flashing the machine should solve the problem completely;

4.If none of the above works, then you can send it in for repair.

The reasons that lead to iPad blue screen are as follows;

Jailbreaking and installing the plugin results in a blue screen, flashing the system to restore the system, or uninstalling the related plugin will result in recovery.

If a hardware failure causes a blue screen, you can go to the after-sales service or specialty store for testing and repair.

The iPad mini2 is equipped with a Retina screen with the same resolution as the iPad Air, which is 2048x1536, which is at the level of the iPhone 5s and 326ppi. That's the highest standard for a tablet device with an inch screen. iPad mini with Retina Display has the highest screen definition of any tablet on sale in the world, and the human eye can no longer distinguish grain.

Hardware screen. Go to customer service and ask