How to set up a wireless network for telecom fiber modems

After the telecom optical modem is installed, connect the network cable port to one of the network ports of the optical modem (for example, network port 1).

Connect the other end of the network cable to the network port of the computer, check the network connection status, and ensure that the network is successfully connected.

Use the default address to enter the Fibre modem setting page, the default address is the user name and password can be found behind the device.

<> set the basic wireless information: After logging in, click the "Network" column, and the basic WLAN configuration on the left side is by default, and check "Enable Wireless", "Wireless QoS", and "Wireless Multicast".

On this page, you can change the SSID of the wireless network, which is the name of the wireless network.

Set the wireless network password: Select WLAN Security Configuration in the left navigation pane and configure the following parameters: Encryption mode: Mixed WPA2 WPA-PSK.

After the setting is successful, you can connect with the network cable and connect to the Internet through the wireless network.

This type of optical modem is generally a routing modem with dial-up function.

1. According to the model of the optical modem, consult the relevant information to obtain the trust in the setting process;

2. Before setting, record some options and values when not set, so that you need to return when the setting fails.

4. If you don't have enough do-it-yourself, it is recommended to find a professional or a friend with a high level of computer network to help you set it up.

The installation and setup of the router is as follows:

1.First, connect the line between the router, the broadband modem, and the computer.

3.After logging in to the background, select Quick Settings, enter the account and password applied for from the network service provider, and go directly to the next step after the input is completed;

4.Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

5.Confirm it once the input is complete, and then restart the router to take effect.

First, the wireless optical modem must be cracked in order to realize the wireless routing function.

The wireless cat is customized by telecommunications, and the wireless routing function is limited, and the wireless routing function can only be realized after cracking, so that mobile phones, laptops, and pads can access the Internet wirelessly. At the same time, the desktop computer has wired Internet access (no dial-up, direct Internet access).

There are many cracking tutorials on the Internet, and the cracking of wireless cats is different for each model. You search for the model of your wireless modem, find the tutorial, and check the settings.

Second, take Shanghai Bell RG100A-BA wireless cat as an example, the cracking tutorial is as follows:

1. Unplug the ** line on the cat or the network cable into the home, open the browser, and enter the address bar.

Log in to the wireless modem with the username telecomadmin and password ne7ja%5m.

First of all, go to delete all the connections in the system.

Note that you should tick the radio box after the delete option and then click Delete.

When you're done, restart the wireless modem.

2. Log in with the super user telecomadmin again.

Click on "Network" - "Broadband Settings".

Click Add to add a new link rule, select Route, select PPPoE->PPPoE Routing Bridge Hybrid Mode, and fill in your local VPI and VCI. Generally, it is 8 35, but there will be a gap due to different geography. Before deleting the system default connection, confirm that everything else is based on the system default.

Set the dial-up mode and service mode. If it is unlimited, you can choose the following automatic connection, whether the computer is turned on or not, as long as the routing cat is on, it will be automatically connected. If it is a package, it is best to choose to automatically connect when there is traffic.

If you select Internet Service Mode, all other services are based on the system default.

3. Save and exit.

Open the page and put the service control list ("scl"All the checks for the LAN and WLAN that are used by the service are ticked and then saved to exit.

4. Finally, the wireless signal encryption of the wireless routing modem is irrelevant.

Set your wireless settings in "Network - > Wi-Fi Configuration". Set your Wi-Fi name. In general, this setting does not need to be changed.

The wireless key is generally written on the bottom of the cat. If you don't know the wireless key, you can click Advanced below to set it up again. Set up WPA, pre-shared key.

5. Restart the routing modem, and you can use automatic dialing to use wireless routing to access the Internet.

Fiber-to-the-home, optical modem to connect to the wireless router method:

1.Connect the WAN port of the router to the LAN port of the optical modem with a network cable, and when the WAN port light of the router flashes, the connection is normal.

How to configure a wireless router:

1.The system is connected to the router.

Turn on the wifi of the computer, search for the default wifi name of the router (the nameplate on the back of the router is written), and connect to the wifi network. The first time you use the router, you generally don't need to enter the wifi password.

2.Go to the gateway page.

Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface. (This interface will pop up automatically for new routes).

3.Set up a way to access the Internet.

Go to the WAN port settings in Advanced settings. If the broadband service requires dial-up, select PPPoE dial-up, otherwise you can choose DHCP to get automatically. To dial up PPPoE, enter the broadband account password, and select Automatic connection as the connection mode.

If DHCP is automatically obtained, you do not need to enter this field.

4.Set the wifi name and password.

Go to Wireless Security in the Wireless Settings and select WPA2-PSK mode for Security Mode. Select AES for WPA encryption rule. Set up a wireless network key. The router will automatically restart after setting, please enter a new wifi password to connect.

How to set the connection of the network modem router.

There is no need for a router, there is a wifi account password on the back of the optical modem, you can enter the account password to connect with a mobile phone and a notebook, but you can't go to the Internet directly, you need to dial up with a broadband connection, and the laptop can be connected to wifi and dial up the Internet. Android users can install PPPoe dial-up software after root privilege to dial-up the Internet. Of course, if you are afraid of trouble, you can buy a wireless router.

1. If your cat has a wireless function, you can use the cat's wireless.

2.If the cat doesn't have wireless capabilities, it's time to buy a wireless router.

1: First modify the modem to the router mode, which requires the user's main ID card to the business hall to modify, the modem can be connected directly to the computer without a broadband connection to access the Internet is the routing mode, so you don't need to go to the business hall to modify.

2: Use a network cable to connect the wireless modem and the computer.

4: Click Network--LAN Settings and turn off DHCP enabled at the bottom. Click Apply.

<>6: Power off the wireless cat and restart, then use a network cable to connect the LAN port 1 of the optical cat and the LAN port 1 of the wireless modem, and use the second network cable to connect the LAN port 2 of the wireless cat and the LAN port of the computer, so that the wireless cat can be used as a wireless AP.

Cell broadband doesn't use broadband to post passwords, right? Direct access to the broadband wireless cat is not usable, if you want to connect to multiple computers, you have to expand the junction box or install a switch.

You plug the fiber optic cable into lan1 and then dial it out! That's how my desktop works, and theoretically wireless. But now you can't test without a wireless network card in hand.

Only a single device can access the Internet, and no longer can set routes.

[Network cable connection].

1. (There is an adslmodem cat) connect the ** line (the thinner line) to the line port of the cat (a smaller one), and the cat separates a network cable to connect to the WAN port of the router (blue), and then find a short network cable, one end is connected to the computer, and one end is connected to the router 1 2 3 4 Any interface (yellow);

2. (No adslmodem cat) directly connect the network cable to the WAN port of the router, and then find a short network cable, one end to the computer, and one end to the router 1 2 3 4 any interface (yellow). Log in to the router

1. Open the IE browser, enter the default IP address of the router (and press Enter;

2. In the pop-up login window, enter the username: admin; Password: admin; Then click OK, if the username and password entered are correct, the browser will enter the main page of administrator mode; Router Settings

1. Choose the correct Internet access method to set up, there are three common Internet access methods: PPPOE, dynamic IP, and static IP (static IP is in the advanced settings);

2. ADSL dialing: Select "ADSL Dialing" in the settings page, enter the broadband user name and password provided by the broadband operator (such as Telecom) in the "Broadband Username" and "Broadband Password", and click "OK". Here we demonstrate the ADSL dial-up method used by the average home user.

3. Change the wireless password and wireless signal name.

Click "Wireless Settings" - "Wireless Security" to set the wireless password;

4. Click "Wireless Settings" - "Wireless Basic Settings" in the settings interface to modify the wireless signal name;