How much does the old Mondeo 2 0L cost to burn engine oil

Most of the Ford Mondeo engine oil burning is caused by the piston rings being trapped by carbon deposits. Relying on the addition of high-viscosity engine oil to continue life is only an expedient measure to cure the change. The poor power and high fuel consumption of the engine are due to the fact that the oil participates in the combustion and forms more carbon deposits, which in turn aggravate the degree of oil burning and form a vicious circle.

Too much carbon deposits will clog the fuel injector, resulting in poor atomization and poor combustion. In the long run, it will cause cylinder wall strain, or even cylinder burst, and finally the engine can only be disassembled for overhaul.

The solution to burning the oil.

In the habitual thinking of car enthusiasts, they always think that burning engine oil should be overhauled, so that they not only have to bear high maintenance costs, but also bear the unpredictable risks and depreciation losses brought about by the overhaul. Destroy the airtightness and precision of the engine. And there is a possibility that the engine oil will burn again after tens of thousands of kilometers, so overhauling the engine is not sustainable.

Now the no-dismantling technology has been very mature and gradually accepted by the majority of car owners. In particular, the non-destructive repair products containing PNF patented technology have completely gotten rid of the technical shackles of the operation of the auto repair shop, and the owner can operate it himself without removing a screw, and the piston ring is repaired and released during driving, and the effect is remarkable.

The oil itself has a certain amount of consumption, and this consumption is normal. If you consume too much, there is a problem of burning engine oil. Burning engine oil is caused by the following factors, as long as the following problems are solved, burning engine oil can be solved.

There are many factors that affect the burning of engine oil, such as: fuel quality, driving conditions, driving habits, maintenance habits, etc., the above reasons will aggravate the oil consumption and lead to the burning of engine oil, making the vehicle appear:

1. Carbon deposition occurs in the combustion chamber, which makes the gas ring of the piston ring stuck, and the sealing is poor.

2. Oil sludge is generated in the lubrication system, and the oil sludge blocks the oil return hole of the oil ring and weakens the oil scraping performance.

3. Wear occurs between the piston and the cylinder wall.

4. The valve seal is corroded and aging, and the sealing performance fails.

5. Choose an oil that is not suitable for the viscosity of the vehicle.

In addition, cars now have crankcase ventilation systems (exhaust valves), which can also exacerbate oil consumption if there is a problem.

Summary. 1. The configuration power of the Mondeo from 16 to 17 years is about 14 150,000 yuan, and the specific words have to refer to the actual vehicle configuration and the mileage of the car.

2. If it is a 16-year-old or 17-year-old Mondeo model, the current second-hand car ** is about 140,000 yuan, and the specific ** must look at the configuration and condition of the vehicle.

3. This depends on the condition of the car, and what the configuration model is, **about 150,000 yuan, and the original ** car is not cheap.

How much is a Mondeo in 16 years.

Wait a minute, dear.

1. The configuration power of the Mondeo from 16 to 17 years is about 14 150,000 yuan, and the specific words have to refer to the actual vehicle configuration and the mileage of the car. 2. If it is a 16-year-old or 17-year-old Mondeo model, the current second-hand car ** is about 140,000 yuan, and the specific ** must look at the configuration and condition of the vehicle. 3. This depends on the condition of the car, and what the configuration model is, **about 150,000 yuan, and the original ** car is not cheap.

Specifically, we have to go to the scene to see.

If the Ford Mondeo is not used properly, it will burn the engine oil, and the oil itself has a certain consumption, which is normal. If the consumption is too large, there is a problem of burning oil. There are several factors in burning oil, which can be solved as long as the following problems are solved.

1.Use oils that are of poor quality or do not meet the requirements of the viscosity grade. Low oil quality will lead to increased wear.

In addition, too low or too high oil viscosity can lead to poor engine lubrication, which can increase wear on piston rings and cylinder walls, reduce sealing performance, and lead to oil burning. 2.The gap between the piston ring and the cylinder wall is too large, the piston ring is improperly installed or the sealing performance becomes poor, and the oil on the cylinder wall enters the combustion chamber, resulting in oil combustion; In addition, poor sealing performance of the valve seal, damage to the crankcase forced draft valve (PCV) or clogged crankcase vent can cause excessive pressure in the crankcase and cause the oil to enter the cylinder with the crankcase gas and participate in combustion.

4.Turbocharger oil leak. The turbocharger is mounted at the front of the exhaust pipe and operates at a high temperature.

When the engine is running at full load, the speed of the turbine and pump wheel can reach 10,000-20,000 rpm. The turbine shaft has oil-lubricated floating bearings and an oil passage to the turbocharger. Or an oil leak from a pipe or bearing can cause oil to seep from the turbocharger into the exhaust pipe.

When the exhaust pipe temperature is high, the oil is roasted into blue smoke and discharged. 5.The valve oil seal has a leak, which means that the oil leaks through the valve oil seal into the combustion chamber and burns.

For maintenance, Mondeo oil is used, and the Mondeo oil model is 5w30. Because the engine of this model is turbocharged, compared to the self-priming engine, its engine is more precise, the working environment is more demanding, the oil quality is higher, and the oil needs to flow better, so it is best to use a fully synthetic engine oil with a longer replacement interval.

For the choice of engine oil brand, focus on the long-term performance of the engine oil and choose Mobil lubricants; Pay attention to the cleaning performance of the engine oil, you can use Shell lubricants; Castrol is recommended for motor oils with strong film toughness. For example, turbocharged engines are prone to carbon accumulation at high speeds, so you can choose Shell synthetic engine oil with strong cleaning performance.

Generally, 5W can be used in most areas in winter, but it is best to use 0W in some areas in the north (such as Heilongjiang), which has good cold start performance and adapts to local environmental conditions. The high temperature viscosity of lubricating oil is 30, but if you often drive in congested road sections, the vehicle is relatively old, and it is a long-distance transportation of heavy-duty vehicles, you can appropriately increase the viscosity of lubricating oil, for example, you can use 0w40 oil.

In addition to the choice of oil quality and viscosity grade, car owners should also pay attention to the amount of oil to be added. The oil level should be within the upper and lower limits of the dipstick. If it is too high or too low, it will affect the engine to a certain extent.

Too much oil can easily increase the load on the engine and affect the power; After a long time, the exhaust ventilation system of the car engine is also easy to be damaged, the carbon deposit increases, and too much oil will cause the illusion of burning oil. Too low oil content often affects the overall lubrication of the engine, especially for many parts of the crankshaft splash lubrication, which can cause wear and even damage.

Millions of car purchase subsidies.