How to make bubble water Blowing bubbles the most

Childhood life is carefree, and blowing bubbles is a very fun thing. Although it is convenient to buy bubble-blowing toys, children love to play so much, you may wish to try making your own bubble-blowing water! So how do you match the water that blows bubbles so much that you blow a lot?

How can the water that blows bubbles not break?

How to match the water to blow bubbles to blow a lot.

Method 1. Material:

2 cups, 1 tea bag, sugar, boiling water, detergent.

Method: 1. Take a cup and pour boiling water into it and put it into a tea bag;

2. Add 1-2 tablespoons of sugar to an empty cup, pour in some detergent, pour in tea, and stir with chopsticks;

The bubble water is made, and the bubbles blown with this bubble water are large and not easy to break.

Method two. Material:

Soap, knife, sugar, tea bags.

Method: 1. Cut the soap into small slices and put it in a cup, flush into hot water to dissolve the soap flakes.

2. Add an appropriate amount of granulated sugar and a bag of tea to the cup, cover the lid and leave overnight.

3. Everything is OK, and the hygienic and environmentally friendly super bubble liquid is made, and the effect is very ideal.

Method three. Material:

Water, dish soap, sugar.

Method: 1 cup of water + 1 3 cups of dish soap + half a spoon of sugar, stir.

2. The bubble water made in this way will not have a pungent smell and is safe.

Method four. Material:

Dish soap, vinegar, small bottles.

Method: You can add a little vinegar to dish soap, as long as the concentration of dish soap is enough, the effect is really good.

Method five. Recipe:

Glue: Water: Washing Spirit: Hand sanitizer (shampoo) ==1:4:2:2, you can also add sugar to increase the effect and add blue ink.

Method: Use pearlescent hand sanitizer or shampoo to bubble for better color, if you add sugar and vinegar, the bubble is not easy to break.

Method 6. Material:

2 parts detergent, 6 parts water and 1 part glycerin 4 parts.

Ways to slow down the disappearance of bubbles.

2. Glycerin is a hygroscopic liquid, which forms a weak chemical bond with water, thereby slowing down the evaporation rate of water.

Method 7. Soap, hot water, colored ink (to add color).

1. Stir one part liquid soap, 1 part glycerin, and 6 parts of water together to make bubble water in daily life, there are many materials that can be used as water for blowing bubbles.

2. For example, chop the soap and dissolve it in water, or you can add water with dishwashing detergent or shampoo. Experiments have shown that adding three solutions of soapy water, dishwashing detergent and shampoo with comparable concentrations can make the bubbles blown out more durable and not easy to burst.

3. Another method is: add a small spoon of granulated sugar or a little tea in the soapy water, and put it in a dark place overnight, you will find that the bubbles blown out by this soapy water are not only bright in color, but also less likely to break.

Make bubble water with honey to blow bigger.

If you want to blow the bubbles bigger, you can add a little honey to the water, so that the water molecules and the active agent molecules can be fused more tightly, increase the viscosity of the bubbles, and the bubbles will be bigger.

Bubble water is one of the important toys for children, and special attention should be paid to the safety of bubble water solution when making bubble water.

How to make bubble water.

Prepare a basin of warm water

First of all, we prepare a basin, and the size of the basin is not a hard requirement. Then we pour the appropriate warm water into the basin, and the amount of water depends on how much bubble blowing water we want to make. If you want to do more, pour more water, and if you want to do less, pour less water.

The temperature of the water is generally around 60 degrees, which is the best temperature for making bubble water. However, it is difficult to feel with our hands whether the water temperature is 60 degrees Celsius. Therefore, the Iwashu faction can prepare a thermometer to measure the temperature of the water in the basin to avoid the problem of failure to make because the water is too hot or too cold.

Pour dish soap over warm water

We put the appropriate dish soap in warm water, the optimal ratio is 1:3 of warm water to dish soap. However, this is only an approximate value, and we can increase or decrease the foaming level of our dish soap according to our own home.

If the dish soap is easy to foam, you can put a little less. However, try to put a little more dish soap, because the most important thing in bubble water is bubbles, so putting a little more dish soap will make it easier to bubble. If you like colored bubble water, you can also add some coloring.

Add white sugar and liquid glue

After pouring in the dish soap according to the steps above, we put white sugar and liquid glue in the basin. After that, we can stir well with our hands. If you feel that it will be difficult to wash your hands when you wash your hands, you can also find a spoon to stir the mixture, and the final result will be the same.

Normally, we pour a jar of liquid glue and about a quarter bowl of white sugar into the basin. When all the items are stirred, the bubble water is ready. We can put these bubble water in a small bottle so that it will be a little more convenient to use.

To make bubble water with a lot of bubbles, you can follow these steps:

Prepare clean containers and mixing tools.

Pour 1 2 cups of detergent and 4 cups of water into a container.

Stir slowly to combine, trying to avoid creating bubbles.

Optional) Add 1 4 cups of corn syrup or honey to make the bubbles stronger and longer-lasting.

Let the mixture sit for a while (e.g., 30 minutes) to allow the bubbles in the bubble water to disappear.

Once the bubble water is made, you can use a bubble wand or other tools to slowly blow the bubbles out in the air.

Note: The type and quality of detergent will affect the quality and quantity of bubbles. It is recommended to choose a fragrance-free, deconstructant-free cleaner to ensure good foam quality.

When making bubble water, try to avoid creating bubbles as they may ruin the quality of the bubble water.

If the bubble water is too thick, you can add water to dilute it appropriately, which can increase the number of bubbles.

If you're going to make a lot of bubbles, it's a good idea to have enough bubble water on hand so that you can keep adding bubble water during the play to maintain the quantity and quality of bubbles.

Here's how to make your own bubble water:

1. Method 1: Cut the soap into small slices and put them in a cup, pour hot water to melt the soap flakes, then add an appropriate amount of sugar and a bag of tea to the cup, cover the lid and leave it overnight.

2. Method 2: 1 cup of water, 1 3 cups of dish soap, half a spoon of sugar, stirred, this is a formula that has been verified, unlike the bubble water sold outside has a pungent smell and a high safety factor.

3. Method 3: Add fragrant soap and a little sugar with black tea water, soak it for one night, and the bubbles blown out of the water are big and not easy to break.

4. Method 4: Take a cup and pour boiling water, put in a bag of tea, add 1-2 tablespoons of sugar to the empty cup, pour in some detergent, pour in tea, and stir it with chopsticks.

5. Method 5: Glue: Washing Ling: Hand sanitizer (shampoo) = 1:4:2:2 The formula effect is very good, and you can also add sugar, the bubble is not easy to break, and the effect is increased with blue ink.

6. Method 6: Add a little vinegar with dish soap, as long as the concentration of dish soap is enough, the effect is really good.

7. Method 7: Glycerin, glue, water, washing spirit, the ratio is 1:1:4:4, glue must be added, because the bubbles blown out in this way are thicker.

Blowing bubbles is a game played by children, it is a very popular game, and it is usually played by small children.

How to make bubble water that blows bubbles:

Brew tea: Put the tea leaves into a cup, brew the tea with hot water, cover the lid and steep for a while, strain the tea leaves, leaving only the tea.

Prepare the bubble water: Put the dish soap and a teaspoon of sugar in a container, stir well, and pour in the prepared tea.

Cooling: Shake the bubble water well and wait for the water to cool.

Bottling: Fill the prepared bubble water into the prepared small bottle.

Bubbles are formed due to the surface tension of water. This tension is the mutual traction force that exists inside the object and is perpendicular to the contact surface of two adjacent parts when it is subjected to a tensile force.

The mutual attraction between water molecules on the surface of the water is stronger than the attraction between water molecules and air. These water molecules are like they're glued together. However, if the water molecules are overly bonded together, bubbles will not form easily.

The soap "breaks" the surface tension of the water, reducing it to only 1 3 under normal conditions, which is the optimal tension required to blow bubbles.

Light is refracted at both the top and bottom of the film as it passes through the film of the soap bubble, which can contain up to about 150 different layers. The messy color combinations we see are caused by unbalanced layers of film. The thickest film layer reflects red light, the thinnest reflects violet light, and the center reflects colorful light.

How to make bubble water with high configuration:

Method 1: Materials: 2 cups, 1 bag of tea, sugar, boiling water, detergent.

1. Take a cup and pour boiling water into it and put it into the tea bag; 2. Add 1-2 tablespoons of sugar to an empty cup, pour in some detergent, pour in tea, and stir with chopsticks; The bubble water is made, and the bubbles blown with this bubble water are large and not easy to break.

Method 2: Glue: Water:

Hand sanitizer (shampoo) ==1:4:

2:2, you can also add sugar to increase the effect with blue ink. The color of the bubble is better with pearlescent hand washing liquid or shampoo, and the bubble is not easy to break if you add sugar and vinegar.

When making homemade bubble water, first put the tea leaves in a clean cup, pour in the appropriate amount of boiling water, cover the lid and let it soak for a while, pour half a spoon of sugar and dish soap into the tea, or replace it with soap and washing powder, stir it well with chopsticks, and let it stand in a cool environment for one night.

When making bubble water with no silver bubbles, first put the tea leaves in a clean cup, pour in an appropriate amount of boiling water, cover the lid and let it soak for a while, and then filter out the tea residue, leaving only the tea.

Pour half a spoonful of sugar and dish soap into the tea, or replace it with soap and washing powder, stir well with chopsticks, let it sit in a cool environment overnight, and wait until it is completely melted before use.

After that, prepare a straw in the quilt, cut it into a short section and blow it, if there is no sugar, you can also use glycerin or honey instead, so that the bubbles blown out are not easy to burst.

The method of making bubble water for blowing bubbles is as follows:

You'll need a wire about 10 centimeters long to make bubble water. A small glass of water. About 10 grams of laundry detergent.

About 10 grams of detergent. A chopstick. First, remove the wire about 10 cm long.

Roll either end into a circle. The length of the remaining wire is about 5 to 6 cm. Roll about 4 to 5 cm.

Then, take out a small glass of water. Then pour 10 grams of laundry detergent and 10 grams of dish soap into a small glass of water. Note:

When pouring, you can pour it together or one by one.

Then, chopsticks come in handy. Take out the chopsticks, put them in a small glass of water, add 10 grams of laundry detergent and 10 grams of dish soap, and stir for about 15 seconds. Then, we will see that there will be a lot of small bubbles.

We need to wait a while for those little bubbles to burst. This is to make the bubbles we blow bigger and more explosive. Note:

Other tools can be used to pop bubbles. Finally, take out the freshly made bubble ring. Put in sparkling water and remove.

Put it in your mouth and blow gently. Then there will be bubbles.

Pour 10 ml of dish soap into the prepared empty bottle, then pour 50 ml of water into the bottle in the ratio of dish soap to water 1:5, stir it well, and you're done. Place 10 g of soap shavings in a prepared empty plastic bottle and follow the soap shavings and hot water 1:

5 ratio, pour 50 ml of hot water into the bottle, stir it well, and you're done. Brew a cup of tea with hot water, filter out the tea leaves, keep the tea, mix it into the bottle according to the ratio of dish soap and hot tea water 1:5, and stir well to complete the bubble water.

The bubble water method of blowing a lot of bubbles is as follows:Ingredients Tools: container, dish soap or baby shampoo, water, glycerin, sugar or corn syrup, stirring sticks.

1. Prepare the raw materials for preparing bubble water.

2. Pour dish soap or baby scent into a bowl to upgrade, and then pour water.

3. Add glycerin, sugar or corn syrup and other thickeners.

4. Stir the liquid gently and thoroughly.

5. If you leave the bubble water for an extra day, the bubbles will be more beautiful.