-
Blowing bubbles is a game that children often play, simple and interesting, the bubble water bought outside has a taste, which is not good for children's growth, or it is safer to match it yourself, so how to match bubble water at home, let's practice it.
The first step is to make tea.
Pour the tea leaves into a cup, brew the tea with hot water, cover and steep for a while.
The tea leaves are then strained out, leaving only the tea.
The second step is to prepare bubble water.
Place dish soap and a teaspoon of sugar in a container and stir well.
Then pour in the prepared tea water.
The ratio of dish soap to tea is one to three.
Step 3: Cooling.
Shake the bubble water well and wait for the water to cool.
The fourth step is bottling.
Put the prepared sparkling water into the prepared small bottle.
Step 5: Blow bubbles.
Prepare a straw and cut a small piece to blow bubbles.
Dip the straw in bubble water and blow it safely.
This bubble water is environmentally friendly and safe, and there are no other added ingredients, so adults can rest assured that children can play.
-
When brushing your teeth, there is a bubble, and the water of the laundry detergent can also make a bubble.
-
It's very easy to get some shampoo and shake it in a small bottle, and then make a small circle and dip it in some water to blow bubbles, which I used to play a lot when I was a child, and when you blow it, you can go to the top of the building, because it's high, so the bubbles will stay in the air for a longer time, so you can increase the sense of achievement.
-
Choose a laundry detergent or liquid with a lot of foam and add the right amount of water.
-
Add laundry detergent, add some dish soap and water and stir.
-
Mix dish soap with water and shake any evenly on the go.
-
Soak in soapy water, and blow out colorful bubbles.
-
Water and laundry detergent can be added.
-
Mix with water, glue, and dish soap.
-
When blowing bubbles, you need to put chewing gum.
Chew it completely to soften, so that the bubble gum can be flexible enough.
A large bubble is blown out, and the specific operation steps are as follows:
1. Put the bubble gum in your mouth.
2. Chew repeatedly.
3. Use your tongue to hold the bubble gum between your upper and lower teeth.
4. Slowly blow bubble gum between your teeth.
5. Bubble gum slowly grows larger and bubbles appear.
Notes:1. Bubble gum can't be eaten.
2. Bubble gum will lose its toughness after being used for a long time.
-
Prepare a basin of warm water
First of all, we prepare a basin, and the size of the basin is not a hard requirement. Then we pour the appropriate warm water into the basin, and the amount of water depends on how much bubble blowing water we want to make. If you want to do more, pour more water, and if you want to do less, pour less water.
The temperature of the water is generally around 60 degrees, which is the best temperature for making bubble water. However, it is difficult to feel with our hands whether the water temperature is 60 degrees Celsius. Therefore, the Iwashu faction can prepare a thermometer to measure the temperature of the water in the basin to avoid the problem of failure to make because the water is too hot or too cold.
Pour dish soap over warm water
We put the appropriate dish soap in warm water, the optimal ratio is 1:3 of warm water to dish soap. However, this is only an approximate value, and we can increase or decrease the foaming level of our dish soap according to our own home.
If the dish soap is easy to foam, you can put a little less. However, try to put a little more dish soap, because the most important thing in bubble water is bubbles, so putting a little more dish soap will make it easier to bubble. If you like colored bubble water, you can also add some coloring.
Add white sugar and liquid glue
After pouring in the dish soap according to the steps above, we put white sugar and liquid glue in the basin. After that, we can stir well with our hands. If you feel that it will be difficult to wash your hands when you wash your hands, you can also find a spoon to stir the mixture, and the final result will be the same.
Normally, we pour a jar of liquid glue and about a quarter bowl of white sugar into the basin. When all the items are stirred, the bubble water is ready. We can put these bubble water in a small bottle so that it will be a little more convenient to use.
-
There are many ways to make bubble water, and here are a few specific ways to make it.
Method 1: Pour 10ml of dish soap into the prepared empty bottle, then pour 50ml of water into the bottle according to the ratio of dish soap and water 1:5, stir it well, and it is done.
Method 2: Put 10 grams of soap crumbs in a prepared empty plastic bottle, pour 50 ml of hot water into the bottle according to the ratio of soap crumbs to hot water 1:5, stir it well, and it is done.
Method 3: Brew a cup of tea with hot water, filter out the tea leaves, retain the tea, mix the kettle into the bottle according to the ratio of dish soap and hot tea water 1:5, and stir evenly to complete the bubble water.
Method 4: Take a cup and pour boiling water, put in a tea bag Add 1-2 tablespoons of sugar to an empty cup, pour in some detergent, pour in tea, stir it with chopsticks, okay, bubble water is ready, the bubbles blown out with this bubble water are large and not easy to break.
Method 5: Cut the soap into small slices and put them in a cup, pour in hot water to melt the soap flakes. Then add an appropriate amount of granulated sugar and a bag of tea to the cup, cover the lid and leave it overnight, and the bubble water can be completed the next day.
Method 6: 1 cup of water, 1 3 cups of dish soap, half a spoon of sugar, stir and stir. This is a proven formula. Unlike the bubble water sold outside, it has a pungent smell and is safe.
Method 7: Glue: Water: Washing Spirit: Hand sanitizer (shampoo) is mixed in a ratio of 1:4:2:2, and stirred evenly to complete.
Method 8: Prepare dish soap, sugar, laundry detergent, and water, mix them in a ratio of 3:1:2:6, stir evenly and bottle them.
Bubble water is a liquid that can be blown into round bubbles, mainly made from coconut oil, sodium hydroxide, polyvinyl alcohol, glycerin, and spices, among others. It can also be a liquid made with detergent. Bubbles are formed due to the surface tension of water.
This tension is the mutual traction force that exists inside the object and is perpendicular to the contact surface of two adjacent parts when it is subjected to a tensile force. The mutual attraction between water molecules on the surface of the water is stronger than the attraction between water molecules and air. These water molecules are like they're glued together.
However, if the water molecules are overly bonded together, bubbles will not form easily. The soap "breaks" the surface tension of the water, reducing it to only 1 3 under normal conditions, which is the optimal tension required to blow bubbles.
-
Recipe for bubble water:
Method 1: 1. Take a cup and pour boiling water into it and put it into the tea bag.
2. Add 1-2 tablespoons of sugar to an empty cup, pour in some detergent, pour in tea, stir with chopsticks, The bubble water is ready, and the bubbles blown out with this bubble water are large and not easy to break.
Method 2: 1. Cut the soap into small slices and put them in a cup, and pour hot water to melt the soap flakes.
2. Add an appropriate amount of granulated sugar and a bag of tea to the cup, cover the lid and leave overnight.
3. Everything is OK, and the hygienic and environmentally friendly super bubble liquid is ready.
Method 3: 1 cup of water 1 3 cups of dish soap 1/2 tablespoon of sugar, stir. This is a proven formula. Unlike the bubble water sold outside, it has a pungent smell and is safe.
Method 4: Use black tea water, add fragrant soap and a little sugar, soak it for one night, and it's done. In this way, the bubbles blown by the water are large and not easy to break.
Method 5: 1. Cut the soap into small slices and put them in a cup, and pour in hot water to dissolve the soap flakes.
2. Add an appropriate amount of granulated sugar and a bag of tea to the cup, cover the lid and leave overnight.
3. The hygienic and environmentally friendly super bubble liquid is ready!
-
Blowing bubble water formula: glue, water, detergent, hand sanitizer, the ratio is 1:
2Hand sanitizer can be replaced with shampoo, shampoo, etc., and must be pearlescent. Note: Laundry detergent must not be used, because the current laundry detergent is almost the best formula for low-foaming bubble blowing solution:
2 parts detergent, 6 parts water and 1 part glycerin 4 parts. How to slow down the disappearance of bubbles: Prevent the evaporation of water, which has water-collecting properties called hygroscopients.
Glycerin is a hygroscopic liquid that forms a weak chemical bond with water, which slows down the evaporation of water. The use of soapy water will affect the effect of blowing bubbles. Generally, soapy water made with 2 parts of dishwashing concentrate and 6 parts of water can be used.
To make the bubbles last, change the recipe to 2 parts dishwashing detergent plus 6 parts water and 1 to 4 parts glycerin. I first poured a little glycerin into the water, then poured some laundry detergent, quickly stirred the vendors, detergent (laundry detergent) added to the water and put in a little salt, or glycerin, it became bubble water, you can try the foam bath + water + honey.
Method 1: glue + washing + water, the ratio is 1:2:3
Method 2: Soap, hot water, colored ink (to increase color).
Enthusiastic Friends 2009-03-14
Bubble Blowing Solution Recipe Large Collection Optimal Formula for Blowing Bubble Solution: 2 parts detergent, 6 parts water and 1 part glycerol 4 parts glycerin. Reasons for Bubble Colorful: >>>More
Recipe for bubble water 1: Ingredients: 2 cups, 1 bag of tea, sugar. >>>More
Bubble machine for weddings, blowing bubble water can be made in the following ways: >>>More
I'll teach you one of the simplest and most effective ways to connect with you: >>>More
Steamed steamed buns. Here's how.
1. A pound of flour, a quarter bag of Angel (self-rising flour can also be used) 2, the prepared Angel with warm boiled water (more than 20 degrees) turned open and poured into the prepared flour, if the water is insufficient, you can continue to add warm boiled water to the flour, talk about the dough and to the non-sticky hands, put it in the basin and cover it with a lid to ferment for 20 minutes, 3. After fermentation for 20 minutes, add the dry flour to the fermented dough again, continue to the surface of the dough smooth and non-sticky, and put it into the basin again and cover it with a lid to ferment. I add flour twice and ferment three times each time. 4. Divide the dough that has been fermented for the last time into the same size and put it into the steamer, be sure to pay attention to the water in the steamer if it is cold water, and the dough should wake up in the steamer for 15 minutes, and then steam the steamed buns. >>>More