How thick is water based epoxy generally made? What is the general thickness of epoxy self leveling?

Types, commonly used epoxy resin curing agents are aliphatic amines, aliphatic amines, aromatic amines, polyamides, anhydrides, resins, tertiary amines, and ultraviolet rays or light can also cure epoxy resin under the action of photoinitiators. Amine curing agents are generally used for normal temperature or low temperature curing, and acid anhydride and aromatic curing agents are commonly used for heating curing. Dosage, (1) amines are calculated as follows when amines are used as crosslinkers:

Amine dosage = mg hn, where: m = amine molecular weight, hn = number of active hydrogen, g = epoxy value (number of epoxy equivalents per 100 grams of epoxy resin). The range of change is not more than 10-20%, and if cured with excessive amine, the resin will become brittle.

If the dosage is too small, the curing will not be perfect. (2) When using anhydrides, calculate according to the following formula: the amount of anhydride = mg (where:

m = molecular weight of acid anhydride, g = epoxy value (for experiments....)

The thickness of epoxy self-leveling floor engineering can generally be done, and these three thicknesses are more. Zhenghe floor warm tips: the thickness of the project does not affect the performance of the project, as long as the material and project quality are no problem

Water-based epoxy floor paint flat coating is divided into primer, middle coat, putty, and top coat.

Water-based epoxy floor paint primer is generally done.

Water-based epoxy floor paint is generally done.

Water-based epoxy floor paint putty is generally done.

Water-based epoxy floor paint topcoat is generally done.

All whole water-based epoxy floor paints.

It is more common for the thickness of the flat coating process to be about 1mm, and the thickness of other functional floors will be different depending on the requirements.

Water-based epoxy floor paint construction technology.

I haven't heard of the self-leveling of cement that is currently used outdoors.

For resin coatings, the ones used outdoors are generally not too thick, about 2mm, and ordinary epoxy resin floor paints cannot be used outdoors, colored, not UV-resistant, and easy to age and discolor.

Generally 1 to 3 mm, depending on how many layers you do, what kind of ground, self-leveling is not the thicker the better, the most important thing is the details of material selection and construction, choose the right model, then your project is worry-free, to recommend to you a chemical raw material company, is to do wholesale, but also export, so the quality is guaranteed, **is also very favorable, are large wholesale**.

Flooring raw materials wholesale.

Epoxy thin-coated floor construction technology:

Primer: Primer roller brush 1 2 times;

Reference dosage ;

Batch scraping putty: medium paint tone 1 3 times quartz powder flat scraping scrape;

Reference dosage ;

Topcoating: Brush the topcoat roller 2 times;

Reference dosage ;

Floor thickness: approx.

The thickness of the epoxy floor is determined according to the customer's requirements, and the commonly used processes are 1 mm thin coating, 2 mm and 3 mm self-leveling. No matter what kind of epoxy flooring it is, it is composed of three parts: primer, middle coat and top coat. The thickness of each layer will vary depending on the quality of the floor.

The thickness of each layer of epoxy floor in the case of good ground is: thin primer in topcoat, 1mm thin primer in topcoat; 2mm self-leveling primer in topcoat, 3mm self-leveling primer in topcoat,

The process of epoxy floor paint application is generally divided into top coat layer, middle coat and primer layer. Among them, the topcoat layer can resist the friction of vehicles and other vehicles, and isolate the invasion of external corrosive substances; The primer layer can seal the voids of the concrete and prevent corrosive substances from floating up and damaging the epoxy floor; The middle coat, also known as the middle coat, is a coating that is between the primer and the top coat.

The thickness of epoxy floor paint is determined according to the demand, and the commonly used processes are thin coating, 2mm 3mm self-leveling, and the thickness of each layer varies according to the quality of the ground

1. Thin coating. Primer, primer, topcoat.

mm thin coating. Primer, primer, topcoat.

mm self-leveling.

Primer, primer, topcoat.

mm self-leveling.

Primer, medium coat 2mm, top coat.

Under normal circumstances, it is about 5-8 layers, depending on what kind of epoxy floor paint you are making. Do the thickness.

There are many epoxy flooring series, which are basically divided into three pieces, the bottom and the middle surface; The specific number of construction times is determined by the actual ground situation and the user's situation, and the thickness is different, and the cost of different thicknesses is different. Epoxy flooring is suitable for use in different places, the whole is seamless, and dustproof, wear-resistant, beautiful, antibacterial and other characteristics, good materials make good flooring, long-term discoloration and no bulging skin, long service life. There are many epoxy resin floor materials on the market, inferior material resin and curing agent, and the floor service life is short, powder loss, and poor wear resistance, but the advantage is that it is low, which is favored by many customers, but in exchange for endless troubles, it costs a few dollars less but the service life is very short, and the gains outweigh the losses.

Epoxy floor paint is a high-strength, wear-resistant, beautiful and beautiful floor paint coating. It has the advantages of no joints, solid texture, good adhesion, good chemical resistance, light anti-corrosion, dustproof, convenient maintenance, and low maintenance cost. It can be divided into epoxy flat coating floor, epoxy mortar flat coating floor, epoxy self-leveling floor, epoxy mortar self-leveling floor, epoxy anti-static self-leveling floor, etc.

A variety of construction schemes can be designed according to the different use requirements of customers, and the following "Zhuangchen Decorative Floor" will explain the thickness difference of epoxy floor engineering in turn

1. Epoxy flat coating floor construction: the most common epoxy floor paint, also known as epoxy thin coating (thin layer) floor. The construction process is generally four processes, one primer layer, two coatings, and one topcoat layer (one bottom, two middle and one side).

Epoxy primer layer: generally scraped or roller coated, construction once, the average thickness is about or so, epoxy coating (epoxy putty layer): scraping coating, construction twice, the average thickness is about about, epoxy topcoat layer (epoxy flat topcoat): roller coating, construction once, the average thickness is about about about, some people use the spraying process for the construction of flat topcoat, then the thickness of the epoxy floor is reduced again.

In recent years, with the refinement of materials, the average thickness of the whole process of epoxy flat coating floor is mostly between; Therefore, the coating is relatively thin. Of course, we can also provide customers with other professional epoxy floor construction solutions according to the customer's cost budget or use requirements to meet customer needs.

Epoxy flooring can be designed with a variety of solutions according to different use requirements: such as thin layer coating, 1 5mm thick self-leveling floor, anti-slip and wear-resistant coating, mortar coating, anti-static, anti-corrosion coating, etc. Epoxy flooring can be roughly divided into:

Epoxy resin grinding stone flooring, epoxy resin colored sand pressed sand flooring, epoxy resin self-leveling flooring, epoxy resin mortar flooring, epoxy resin flat coating flooring.

The floor paint mainly depends on what your ground structure is, if it is flat, it is generally less than 1 mm is enough, if it is more uneven, you have to brush two or three more, so that it will be thicker, and the cost is relatively expensive.

The average thickness of the whole process of epoxy flat-coated flooring is mostly in between.

The thickness of the epoxy floor can be set according to your needs, usually more than 5mm

According to the design requirements, the drawings are;

Generally 3mm epoxy paint.

This is not much thick, the average ten millimeters!

Epoxy flooring is 1-5mm thick.

Epoxy flooring is a kind of high-strength, wear-resistant, beautiful flooring, with no joints, solid texture, good chemical resistance, anti-corrosion, dust-proof, easy maintenance, low maintenance costs and other advantages. A variety of schemes can be designed according to different application requirements: such as thin layer coating, 1 5mm thick self-leveling floor, anti-slip and wear-resistant coating, mortar coating, anti-static, anti-corrosion coating, etc.

Epoxy flooring can be roughly divided into: epoxy resin grinding stone floor, epoxy resin colored sand pressed sand floor, epoxy resin self-leveling floor, epoxy resin mortar floor, epoxy resin flat coating floor.

Is there any difference between epoxy flooring and regular lawn? I don't feel like it.

How thick the Huaiyang floor is, only by checking it on the Internet can I know that I dare not say nonsense.

I don't know how thick it is, you measure it.

In Yingkai flooring, self-leveling epoxy mortar can be made of different thicknesses according to different needs, and self-leveling epoxy mortar generally has and 5mm.

Self-leveling epoxy mortar can be made with different thicknesses according to different needs, and self-leveling epoxy mortar generally has and 5mm. Yingkai floor answer.

There is no good way but to take the destructive test method, peel off the constructed floor, and then measure it with calipers. Generally, the corner of the wall is selected, so the construction team will make it thicker in this place, and the appearance of the site will be affected. If you know how much paint was used for construction, you can also judge the approximate thickness.