What are the common tools and equipment for integrated wiring?

There are many construction tools for the integrated wiring duct system, and some commonly used power tools and equipment are introduced below, and only the names of simple electricians and hardware tools are listed. 1. Electrician's toolbox Electrician's toolbox is a necessary tool in wiring construction, which should generally include the following tools: wire cutters, needle-nose pliers, diagonal pliers, wire strippers, slotted screwdrivers, Phillips screwdrivers, voltage testers, electrician's knives, electrical tape, live wrenches, dull wrenches, tape measures, hammers, chisels, bevel chisels, steel files, hacksaws, electrician belts, work gloves, etc.

Small materials such as cement nails, wood screws, self-tapping screws, plastic expansion tubes, metal expansion bolts, etc., should also be always available in the toolbox. 2. The reel is at the construction site, especially the outdoor construction site, due to the wide scope of construction, it is impossible to get the power supply anywhere, so it is necessary to use a long-distance power reel to connect the power, and the length of the reel is 20 meters, 30 meters, 50 meters and other models.

3. Hardware tools (1) Trunking shear is a special pvc trunking cutter, and the cut-out port is neat and beautiful. (2) The vice is one of the commonly used clamping tools for sawing, chiseling and filing of small and medium-sized workpieces. Shake the handle clockwise, and the jaws will clamp the workpiece (such as a steel pipe); Shake the handle counterclockwise and the work will be released.

To make a cross-arm sawing angle steel, the angle steel can be clamped with a vice. When sawing, the right residual limb of the hand holding the saw bow should apply force, and the pressure on the left hand should not be too large (mainly to righting the saw frame). There are two kinds of reciprocating operation during sawing: straight reciprocating and swinging operation, and generally there are slightly lifted and the body returns to its original position.

But no matter what kind of silver position, during the sawing process, it is necessary to keep the saw seam straight at all times. Thicker workpieces (such as round bars, I-beams) are generally used for remote saws. The sawing angle should not exceed 15°.

It is too large, and it is not easy to start sawing smoothly; Too small to cut into the workpiece. For thin workpieces (such as thin steel plates, insulating plates), it is advisable to start sawing closely. The sawing angle should not exceed 15°.

When sawing, in order to ensure the accuracy of the cutting point, the thumb nail can be used to guide the saw blade. When sawing metal strips, flat bars, angle bars and channel steel, it should be sawn down from the thick surface as much as possible to increase the effective length of the saw blade and avoid the sawtooth being hooked and breaking. (3) When the ladder is installed in the pipe groove and the wiring and wire pulling process is carried out, it is often necessary to climb the height.

There are two types of ladders commonly used: straight ladder and herringbone ladder. Straight ladders are mostly used for outdoor climbing and destroying wide and high operations, such as installing outdoor optical cables on electric poles and walls; The latter is usually used for indoor climbing operations, such as installing pipe grooves, wiring cables, etc. Before the use of straight ladders and herringbone ladders, it is advisable to tie the feet of the ladder with non-slip materials such as rubbers, and the herringbone ladder should also tie a safety rope between the two ladders to prevent automatic slipping.

4) Pipe vise Pipe vise, also known as gantry vise, is a clamping tool for cutting tubular materials such as steel pipes and PVC plastic pipes. The vises of the pipe vice are fixed to the three-legged iron plate. Pull open the jaws and turn the gantry to the right to place the tube in the jaws.

Then straighten the gantry, and the clamp will automatically fall and buckle firmly. Spinner hand.

1. Electrician's toolbox Electrician's toolbox is a necessary tool in wiring construction, which should generally include the following tools: steel wire vertical pliers, sharp nose pliers, diagonal pliers, wire strippers, slotted screwdrivers, Phillips screwdrivers, voltage testers, electrician knives, electrical tapes, live wrenches, stupid wrenches, tape measures, hammers, chisels, oblique chisels, steel files, hacksaws, electrician belts, work gloves, etc. The toolbox should also always have items such as:

Small materials such as cement nails, wood screws, self-tapping screws, plastic expansion pipes, metal expansion bolts, etc.

1. Wire cutters.

2. Dual-purpose crimping tools.

It is suitable for crimping RJ45 and RJ11 crystal heads. One pair of pliers includes twisted pair cutting, stripping the outer sheath, crimping the crystal head and more.

3. RJ45 single crimping tool.

In the process of making twisted pair network cables, crimping pliers are the most important production tools, and a pair of pliers includes twisted pair cutting, stripping the outer sheath, crystal head crimping and other functions. Because crimping pliers will have different specifications for different wires, you must pay attention to choosing the right type when purchasing.

4. a wire stripper.

Not only is the stripper small and easy to use, it only takes a simple step to remove the outer sheath of the cable, which is to remove the outer sheath of the cable by placing the wire in the corresponding sized hole and rotating it three to five times.

5. Wire strippers.

Wire strippers are a lightweight, commonly used tool for stripping the outer sheath of unshielded twisted pair cables. Not only does it remove the outer coat of the twisted pair, but it does not cause any damage to the core of the cable.

6. Wire bonding protector.

Because the process of inserting the 4 pairs of core wires of the twisted pair into the information module is more laborious, and because the information module is easy to scratch the hand, there is a company that specializes in a wire protection device, and the information module nesting protection device is more convenient to card the line into the information module, and on the other hand, it can also play the role of isolating the palm and protecting the hand.

Tools:

1. Commonly used electrical tools: wire cutters, needle-nose pliers, diagonal pliers, Phillips snail dao wire knife version, slotted screwdriver

electrician's knife, electric test pen; Right.

With the compact cutter. Hold the operation with your hands. Very aspect.

First: you need a double crimping pliers, pay attention to the system when you buy it, pay attention to ask the seller of bai, be sure to bring the kind of crystal head zhi and **crystal head that do it, that is to say, dao can do rj45 and rj11 these two crystal heads. There are two ways to make the network crystal head, T568-B is used for household use, and the line sequence is yellow-orange, yellow, white-green, blue, white-blue, green, white-brown, and brown.

Second: there must be a line tester, and the network cable test will not work. The same goes for lines.

Third: to have a wire binder, install the icon of the above line sequence on the distribution frame, and press down the eight lines in the network cable in turn.

Fourth: to have a line finder, if there is a short one in the dense network cable, it is easy to find the short, easy to confirm the location.

Wire cutters, multi-function network pliers, line testers. These three are the most commonly used cabling tools.

Look at the repetition of this system.

The introduction of netizens.

Tools need crystal head pliers Wire strippers Xiao Huang Aligner wire finder vise Needle nose pliers Offset pliers Electric hammer Electric drill Marble machine cutting machine angle grinder ladder lifting table Also according to the situation of the project site to match tools!!

Professional? Crystal clips, wire strippers, wire cutters, scissors are required. Aces, wire finders, and fluke are more expensive.

5 pairs of 110 type wire bonding tools.

Type 110 Wiring Tool.

RJ11 RG45 dual-purpose tool.

RJ11 tool.

Network cable tester.

Dual-function wire stripper.

Multi-purpose network** crimping pliers.

LED source luxury exquisite flashlight.

Multi-functional network tester.

Multi-function wire strippers, wire punching tools.

Electronic scissors, adjustable peeling tools.

Black carbon steel Japanese needle-nose pliers.

Utility knife strong magnetic drop resistant tape measure (3m 10ft).

Chromium-molybdenum steel cross color batch (1 x 75mm).

Chromium-molybdenum steel (x 200mm.)

Chromium-molybdenum steel cross color batch (2 x 100mm), chromium-molybdenum steel screw batch (5 x 75mm).

Chromium-molybdenum steel (6 x 100mm), chromium-molybdenum steel screw batch cross (5 x 75mm