-
A good mobile phone is protected against static electricity and radiation, and generally will not be damaged by static electricity, so it is best to paste a good static protection film. In addition, pay attention to reducing static electricity in the human body.
generation and channeling of static electricity in the human body. In autumn and winter, humidifiers are used in the house.
Increasing the humidity of the environment can effectively reduce the generation of static electricity, which is also good for health; It is better to go barefoot in the room; Wear cotton clothing; Washing your hands more often is a good way to prevent the accumulation of static electricity.
Static electricity is caused by the transfer of electrons in the outer shell of atoms under the influence of various external forces, forming positive and negative ions respectively. Any two objects of different materials will be transferred and accumulated when they come into contact, forming static electricity. Static electricity on the human body is mainly caused by the friction between clothes or between clothes and the body, so when wearing clothes of different materials, the "electricity" is more or less different, for example, wearing clothes made of chemical fibers is more likely to produce static electricity, while cotton clothes produce less.
And because the dry environment is more conducive to the transfer and accumulation of electric charge, people will feel that the static electricity on their bodies is greater in winter.
Generally speaking, mobile phones will have electrostatic grounding points, which is the self-protection of mobile phones, but if the electrostatic grounding points are not good, the mobile phone will be injured by static electricity, and when the static electricity is large, it will reach hundreds of thousands of volts, which will harm the device. For example, the electronics on the motherboard are damaged, such as breaking down the light-emitting diode.
button lights) capacitors on the lines and so on. Generally, mobile phones are protected against static electricity, such as metal phone cases, which have metal contact points inside to release static electricity. Generally, static electricity is emitted by a metal shell. There is also an internal varistor.
So, first, check if your phone's electrostatic discharge device is OK. Second, try to stay away from static electricity.
-
The impact of static electricity on mobile phones in winter is very small, so don't worry too much.
-
Normal static electricity will not affect the mobile phone, the current is too small.
-
In winter, static electricity does not have much effect on mobile phones.
-
This, normal static electricity has no effect on the phone.
-
Generally, mobile phones have self-protection and will not have any effect.
-
In general, this doesn't matter.
-
Generally, it will not be affected by static electricity
-
I forgot the password for a table platform.
-
Static electricity has a relatively large impact on capacitive screen mobile phones, and the impact on non-touch screen mobile phones or resistive screen mobile phones is negligible;
For capacitive screens, if the fingers have high-voltage static electricity, it is likely to cause the screen to be damaged, and the sensitivity will decrease or even fail.
If you open the phone case and expose the phone motherboard, then no matter what the phone is, the electronic components on the motherboard may be damaged by static electricity.
1. Of course, this has an impact, if the surface magnetic force exceeds a certain range. Since magnets are basically used in mobile phones on the market now, their internal magnetic isolation is below 200gs, and the better the internal magnetic isolation of the mobile phone, the better. >>>More
Many people have a misconception that frequent charging of mobile phones has an impact on the mobile phone and will also consume the life of the battery, but this is not the case. Some batteries have memories, such as nickel electricity, and you must wait until the electricity is used up before you can charge it, otherwise the battery will be used for a shorter time. For batteries without memory, such as lithium batteries, do not charge too often, and the charging time should not be too long, it is better to charge for 2-4 hours, and charging for too long will reduce the life of the battery. >>>More
After nano coating, it will not have any effect on the mobile phone, and it can be used normally. After the coating, the mobile phone can be prevented from dialing in the water**look**, etc., and the hand can also be used normally after soaking in water, and there will be no failure, and it will not affect the normal use of the mobile phone.
No impact. For example, the nominal output current of 2 amps of the charger means that the rated output current of this charger [can provide] does not exceed 2 amps, rather than 2 amps will flow out as long as the load is turned on, and the nominal 2 amps or 1 amps charger actually used by the same mobile phone will flow out the same current, because the output voltage is 5 volts, and the [equivalent load resistance] of the mobile phone as an electric load is the same, and the voltage is divided by the load resistance = load current. Therefore, any power supply with the same voltage, high power and high current can be used instead of small power and small current power supply. >>>More
It is recommended that you bring your warranty certificate to a nearby Huawei Customer Service Center.