What is a car and what does it mean

It's at a certain point where your car goes and his car passes.

Trains, cars, etc., traveling in opposite directions staggered through a certain place at the same time.

Will carIt refers to the fact that when the owner is driving, there is a car coming from the opposite side, hence the name will be a car. When the road is relatively narrow, the vehicle that has conditional avoidance should let the vehicle that has unconditional avoidance pass first. Giving way to a vehicle is a type of traffic prohibition marker, which implies that when a vehicle meets a vehicle, the vehicle facing the mark must stop and give way to the other vehicle.

Precautions for meeting cars: carefully observe the traffic lights and traffic signs when meeting the car; If you will drive in an environment with unclear vision, you should reduce your speed early; Emergency braking is not used in the car.

and slamming the throttle; Do not meet cars at stalled objects; Do not meet at complex addresses such as narrow bridges and narrow roads; Do not turn off the high beams at night.

The sign of the car, with the upward arrow representing itself. If you have a big arrow (black, white), it means that you will go first (go first); If you have a small arrow (red), it means that you will give way to the car (others will go first).

In the process of driving, the mistake between the upward and downward vehicles is called a meeting car. Many novices are afraid of driving, especially when the road is narrow, the novices often have a nervous mood, and after a period of scramble, they will stop and stop to give way.

It can even cause two vehicles to scrape and collide with each other, or bump into non-motorized vehicles, pedestrians and roadside isolation facilities on the roadside.

A meeting refers to a staggered passage of trains, automobiles, etc., that are traveling in the opposite direction at a certain place at the same time.

Huiche is a traffic term that refers to trains, cars, etc., traveling in the opposite direction at a certain place at the same time. The sign of the car, with the upward arrow representing itself. If you have a big arrow (black, white), it means that you will go first (go first); If you have a small arrow (red), it means that you will give way (someone else will go first).

Regulations to be observed:

1) On roads, narrow roads, and narrow bridges without a center line, slow down and keep to the right, and pay attention to the safety of non-motorized vehicles and pedestrians. When it is difficult to meet the car, the party that has the conditions to give way will let the other party go first.

2) On the road section with obstacles, the party with the obstacle will let the other party go first.

3) On narrow slopes, the side with the obstacle gives way to the other party.

4) At night, on the road without street lights or poor lighting, it is necessary to close the high beams at a distance of 150 meters from the oncoming traffic on the opposite side, and use low beams instead; It is not allowed to use high beams continuously when meeting on narrow roads, narrow bridges and non-motorized vehicles.

[Interpretation]: Trains and cars traveling in the opposite direction staggered through a certain place at the same time.

Prepare in advance to avoid psychological panic and operational chaos when meeting the car. For this reason, it is necessary to do a look, two calculations and three slowness before the car

At a glance, that is, look at the model, speed and loading of the oncoming vehicle, the width and solidity of the road ahead, the situation of pedestrians and vehicles on the roadside, the parking and obstacles on the side of the road, etc.;

Second, through observation and comparison, the approximate position of the intersection of the two vehicles is estimated and the road occupation situation is estimated, so as to leave a suitable lateral safety interval;

Three slow, that is, to slow down the speed of the car, close to the intersection of poor conditions, more should control the speed, can not blindly meet, if necessary, should stop first, in order to achieve the purpose of the smooth intersection of the two cars.

The car should also pay attention to the regulations on giving way, and give way in a timely and reasonable manner. At night, on roads with no street lights or poor lighting, turn off each other's high beams and use low beams instead.

Two vehicles driving opposite each other, the moment of the wrong car!

What is a car? Teach you how to master the essentials of meeting cars!

It refers to the intersection of two cars in different directions.

Meeting refers to the moment when there are oncoming cars in opposite directions on the same motorway, and two cars are approaching in opposite directions. In particular, pay attention to the status of the vehicle on the opposite side, the lights, the surrounding environment, pedestrians, etc. In the subjects of the driver's test.

1. There are relevant questions in subject 4, drivers who have just obtained a driver's license should not be nervous when they will drive, if they are not sure, pull over and stop, and traffic accidents are also the responsibility of the other party (pay attention to the change and use of lights when driving at night).

When meeting cars on a dual carriageway with a separation zone, you can slow down first, then keep to the right, control the speed, stabilize the steering wheel, and take care of the situation on both sides of the road to ensure that there is enough lateral spacing when meeting traffic.

2. When the road surface is narrow or there are obstacles on both sides of the road, you should select the intersection point according to the speed of the oncoming car on the opposite side, the road surface, etc., and correctly control your vehicle. If you are far away from the intersection point, you can also accelerate, otherwise, you should slow down and wait;

3. When there is an oncoming vehicle on the opposite side and there is a non-motorized vehicle or obstacle driving in the same direction in the right front direction of the car, it should be decided whether to accelerate and overtake or slow down according to the specific situation. Avoid meeting cars at obstacles and overtaking non-motorized vehicles;

4. When you go to the narrow bridge, you should correctly estimate the distance and speed of both sides from the bridge. Vehicles that are slow and far away from the bridge should take the initiative to slow down and give way, and let the vehicles close to the bridge and fast pass first, and must not blindly rush to prevent collisions;

5. In the case of unclear vision, you should increase your vigilance and reduce your speed; When driving at night, pay attention to changing the light in time, and increase the distance between the two vehicles, and stop to avoid if necessary.

Photo by Q&A) Model Y Model 3 Model X AION V Ideal One Xpeng P7 @2019

One of the test items in the three-way test is the car, which mainly examines the students' sense of orientation and the judgment ability of the road traffic conditions on both sides of the car and the lateral safety distance. Meeting the car refers to the process of the driver driving the vehicle to successfully complete the staggered driving under certain road conditions.

When meeting vehicles, it is required to pay attention to the condition and dynamics of vehicles and pedestrians around the road, and once pedestrians are blocked by oncoming vehicles, they should immediately honk their horns to remind them. If you are intersecting with oncoming traffic on a road without an intermediate guardrail, you should reduce your speed, choose a more spacious section, maintain a speed of 20 to 30 kilometers per hour, and pass slowly in third gear. If it is a road section with poor visibility and poor lighting, the vehicle should reduce its speed and turn on its low beams, and pass slowly when the road is wide.

When hearing the voice prompt "Meet the car ahead", candidates should pay attention to the oncoming car in front of them and stay on the right side of the carriageway until the end of the meeting event. Be careful to avoid other vehicles and not press non-motorized lanes.

Look at which state, look at the model, speed and loading environment of the historical car, the width of the fire line door, the sturdy environment, the roadside pedestrian and vehicle environment, the roadside parking and stagnation environment, etc.;

Second, through the process of inspection and proportional budgeting, the status and road occupation of the two vehicles are roughly estimated to set aside a horizontal safety partition that conforms;

Three slow, that is, to slow down the speed of the car, the premise of the intersection is not good, but also should control the speed, can not consciously meet, when necessary should stop first, in order to achieve the purpose of the two cars smoothly intersection.

Photo by Lei Peng of Pacific Automobile Network).