What kind of lights are the lights What are the lights when you are going to drive

You need to turn on your low beams when meeting the car.

The Road Traffic Safety Law clearly stipulates that at night, vehicles should switch to low beams when they are 150 meters away from oncoming vehicles in the opposite direction; At night, through sharp bends and traffic lights.

When controlling the intersection, the high and low beams should be used alternately; in visibility.

In low cases, warning lights such as headlamps and rear lights should be turned on. When driving at night, especially on urban roads, it is necessary to use as little high beam as possible to reduce the hidden danger of traffic accidents.

Drive at night! Turn on the running lights first! Turn on the low beams!

To put it simply, you don't use the high beams to shake people's homes! The headlights are on the low beams! If you see a friend you know, you can turn on the high beam, and change back to the low beam.

It's like saying hello! (Basically, you have to be very slow!) Otherwise, the other party's car is fast and you won't notice who you are! ）

Generally speaking, at night or in the case of low visibility, turn on the headlights to the headlight position, and then lift the left index finger or middle finger up and down to control the operation lever of the light, which can be realized.

Usually, when 2 cars are coming on, you should turn off the high beams to avoid glare of the lights, which is also polite (but now more and more people don't do this, maybe too many parallel cargo drivers).

In addition, when overtaking, you can also use lights, that is, up and down, keep hitting the high beam a few times, to remind the vehicle in front that you want to overtake.

That's pretty much it.

The headlights are on the low beams!

When meeting the car, you need to turn on the low beams, and at night on the road without street lights or poor lighting, you need to close the high beams from the opposite car 150 meters away, and use the low beams instead; It is not allowed to use high beams continuously when meeting on narrow roads, narrow bridges and non-motorized vehicles.

On roads, narrow roads, and narrow bridges without a center line, slow down and keep to the right, and pay attention to the safety of non-motorized vehicles and pedestrians. When it is difficult to meet the car, the party that has the conditions to give way will let the other party go first.

On a section of road with an obstacle, the party with the obstacle gives the other party the first step, and on a narrow slope, the party with the obstacle gives the other party the first place.

The headlights are on the low beams!

Low beam. Meeting with a motor vehicle at night, not only for politeness, but also for the sake of safety, be sure to turn on the low beams, if it was high beams before, then be sure to change back to the low beams in advance, wait for the vehicle to meet the car, and then decide whether to turn on the high beams according to the road conditions.

High beams shine at a much higher height than low beams, so in order to illuminate objects higher and farther away, low beams are used on roads illuminated by street lights, and vice versa on roads without lights.

Lamp change formula: poor lighting is high beam, good lighting turns low beam;

"Passing", "overtaking" need to be prompted, and the high and low beams are used alternately;

Follow the car" and "meet the car" are polite, and refuse to drive the high beam and the low beam;

When driving in rainy and foggy weather, the fog lights must be turned on;

Traffic accidents are difficult to move, and there is no shortage of width and warning.

Lights for the car:

1. At night, the car should use low beam lights 150 meters away from the opposite direction, and use low beam lights when meeting cars on narrow roads, narrow bridges and non-motorized vehicles;

2. When a motor vehicle is driving at night without street lights, poor lighting, or in low visibility conditions such as fog, rain, snow, dust, hail, etc., the headlights, marker lights and rear position lights should be turned on, but the high beams shall not be used when the rear vehicle driving in the same direction is driving in close proximity to the front vehicle;

3. When meeting the car, because the brightness of the high beam is too strong, and the direct irradiation of the oncoming vehicle, the other driver can not see the road ahead, and it is easy to cause traffic accidents.

4. When the car meets in a sharp bend or the other party does not take the initiative to change to low beam, you can alternately use far and near lights to remind the other party, which is a good habit of using lights in a civilized and safe manner.

Under special circumstances, the car should alternately use the far and near lights. In the process of meeting the car, if the other party uses high beams, so that we cannot see the road clearly and cannot judge the position of the other party's vehicle, and even pedestrians or objects in front of our car are difficult to see, this will increase the probability of accidents.

Therefore, when the opponent's vehicle uses high beams and does not change to low beams in time, we can quickly change the high and low beams to alert the vehicle. If the vehicle is using a quick change of high and low beams, then we need to check whether our lights stay in the high beam position.

Tips for using car lights:Poor lighting is high beam, good lighting turns to low beam;

"Passing", "overtaking" need to be prompted, and the high and low beams are used alternately;

Follow the car" and "meet the car" are polite, and refuse to drive the high beam and the low beam;

When driving in rainy and foggy weather, the fog lights must be turned on;

Traffic accidents are difficult to move, and there is no shortage of width and warning.

Drive at night! Turn on the running lights first! Turn on the low beams!

To put it simply, you don't use the high beams to shake people's homes! The headlights are on the low beams! If you see a friend you know, you can turn on the high beam, and change back to the low beam.

It's like saying hello! (Basically, you have to be very slow!) Otherwise, the other party's car is fast and you won't notice who you are! ）

First high beam into the light flashed signal the other party will light and then drive into the light reduce the speed of the car If the other party driving quality is good, will drive into the light But if the other party's quality is not good, then it is recommended that the landlord reduce the speed in serious cases can choose to park After all, their own life is the most important Don't be strong for a while At the end of the car At the same time, it is the first time when the other party's car drives past The first time you want to turn on the high beam in order to have better lighting Thank you.

Turn on the low beams and reduce the speed of the car If the incoming car is driving the high beam, you can flash it to signal the other person to drive the low beam to meet the car.

That is, flash the low beam.

What kind of lights should I turn on to ensure safety at night? Be careful when driving at night, most novices don't know.

You need to turn on your low beams when meeting the car. At night, on roads with no street lights or poor lighting, turn off the high beams at a distance of 150 meters from oncoming vehicles, and use low beams instead.

The sign of the car, with the upward arrow representing itself. If you have a big arrow (black, white), it means that you will go first (go first); If you have a small arrow (red), it means that you will give way (someone else will go first). In the process of driving, the mistake between the upward and downward vehicles is called the filial piety car.

Many novices are afraid of driving, especially when meeting cars on narrow roads, novices tend to be nervous, and after a period of scrambling, there will be stalling, stopping and giving way, and even causing two cars to scratch and collide with each other.

1. When meeting the car, it is necessary to pay attention to the traffic instructions, flag signals and traffic signs.

2. If you will drive in an environment with unclear vision, you should lower your speed early and drive with low beam closed.

3. Do not use emergency braking, lifting the accelerator, and slamming the target plate of the bidding section in the car.

Fourth, avoid meeting cars at stagnant objects.

5. Do not meet at complex addresses such as narrow bridges, narrow roads, tunnels, and sharp turns.

6. Do not turn off the high beams at night.

When meeting the car, you need to turn on the low beams, and at night on the road without street lights or poor lighting, you need to close the high beams from the opposite car 150 meters away, and use the low beams instead; It is not allowed to use high beams continuously when the narrow debate group is resistant to roads, narrow bridges and non-motorized vehicles.

On roads without a center line, narrow roads, and narrow bridges, slow down to the right to pass, and pay attention to the safety of non-motorized vehicles and pedestrians. When it is difficult to meet the car, the party that has the conditions to give way will let the other party go first.

On a section of the road with an obstacle, the party with the obstacle lets the other person go first, and on a narrow slope, the party with the obstacle lets the other party go first or by.

What lights to use when meeting the car How to use the simulated lights of the car at night: 1. When meeting the car on the road without street lights or poor lighting, choose the meeting place before mentioning the branches, and when it is 150 meters away from the opposite car, cooperate with the other party's vehicle to change the high and low beams, that is, the other party uses low beams when they turn on the high beams, and the other party uses high beams when they use low beams; 2. Control the speed according to the road conditions and drive on the right side as much as possible. When within 150 meters of the oncoming car, turn off the high beams and switch to low-beam anti-glare lights.

so as not to make the eyes of the opposing driver unable to see the surrounding things clearly due to strong light; 3. If the oncoming car on the opposite side does not turn off the far and far fiber lights when they are within 150 meters apart, they should continue to change the far and low beam lights; Don't look directly at the lights of the oncoming car on the opposite side, at this time, you should slow down in time to drive on the right or stop and give way, and don't be angry with it; 4. When meeting on a road with good lighting conditions, turn off the high beams in advance and use low beams instead; When two cars meet, turn off the low beam and only turn on the small light or width indicator light. When the lights of the oncoming car pass through the cab, the low beam can be turned on. @2019

If you meet on a road with no street lights or poor lighting, choose a meeting point in advance. When 150 meters away from the oncoming vehicle, you should cooperate with the other party's vehicle to change the high and low beams, that is, when the other party misses the high beams, you use the low beams, and when the other party uses the low beams, you should use the high beams; Control the speed of the vehicle according to the road conditions, and try to drive on the right side of the vehicle by quietly searching for it.

When within 150 meters of oncoming traffic, turn off the high beams and use the low beams instead, so as not to make the eyes of the other driver unable to see the surroundings clearly due to strong light. When meeting on a road with good lighting conditions, turn off the high beams in advance and use low beams instead; When two cars meet, turn off the low beam and only turn on the small light or width indicator light.

Precautions for meeting cars.

When meeting the car, pay attention to the traffic command signals and traffic signs, and when the line of sight is not clear, you should reduce the speed of the car in advance, turn on the low beam driving, and do not use emergency braking, slamming the accelerator, and slamming the steering wheel in the car.

Avoid meeting cars in complex locations such as narrow bridges, narrow roads, tunnels, sharp turns, etc., avoid meeting cars at night without turning off the high beams, when the car is driving on a road without drawing a center line, when encountering an oncoming car overtaking in close range, you should slow down on the right and be ready to stop at any time; If the opposing vehicle forcibly occupies the road, you should give way to the lane as much as possible, or even stop and give way.