What s going on with the new car Baojun 630 car engine fault light always on

Hello! The car fault indicator light is on, indicating that there is a problem with the car. It is recommended to use the car computer detector to detect it, first clear the fault code, if the light is off, it means that it is an occasional failure, no problem. If the light is still on, the fault code will be read, and then repaired according to the fault content.

It's a pleasure to serve you, I hope I can help you, I wish you a pleasant ride. [If you have a problem with the car, ask the car master.] 4S shop professional technician, 10 minutes to solve. 】

Hello, you can use the computer to read the fault, what is the specific problem [there is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Hello owner, there are many reasons for the engine failure light to be lit, when the instrument shows this yellow engine fault light, it means that there is a problem with your car, the body has more than 10 sensors, these more than 10 sensors will cause the fault light to light up, so only with computer detection can you know that it is caused by a problem, so now there is no way to give you an accurate answer, it is recommended that you go to the nearest repair shop to test, I hope it can help you, I wish you a happy car [There is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Check what the reason is with a decoder [If there is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

If there is an obvious fault in the engine, such as engine smoke, obvious lack of power, or severe shaking, stop immediately, cannot continue driving, and then contact the repair shop to wait.

False fault: The computer reports a fault**, but the car is working normally, it may be that a certain operation is beyond the control of the computer, you can first eliminate the fault of the computer feedback**, and then see if the fault code is still jumped.

Precautions for engine use.

When the temperature is heated at idle speed, due to the low speed, the oil pump can not press the lubricating oil into the lubricating surface quickly, and the oil pressure is also low, so that the moving parts of the engine work in the state of dry friction or semi-dry friction. Due to the poor atomization of the fuel at low temperature, the unburned fuel will enter the crankcase, wash away the oil film on the cylinder wall, and also accelerate the wear of the parts. Therefore, after a few seconds of engine starting, the temperature should be heated up at a fast idle speed to improve the lubrication conditions of the engine.

If the engine temperature is still high after the engine thermostat has been faulted or replaced, the other parts of the cooling system should be overhauled and the thermostat should not be removed.

Summary. Hello, glad to answer for you. The reason why the Baojun 360 engine failure light is on is poor combustion of the mixture, sensor problems, maintenance problems, and oil quality problems.

Due to damage or other problems, the sensor does not produce the correct data, so the ECU of the car will misjudge the engine fault light based on the wrong data. Water temperature, crankshaft position, air flow, inlet air temperature, and oxygen sensor are common problems that may occur. The engine fault light caused by the sensor is lit, and the engine fault light can be eliminated only by replacing or adjusting the corresponding sensor.

Hello, glad to answer for you. The reason why the Baojun 360 engine failure light is on is poor combustion of the mixture, sensor problems, maintenance problems, and oil quality problems. Due to damage or other problems, the sensor does not produce the correct data, so the ECU of the car will misjudge the engine fault light based on the wrong data.

Water temperature, crankshaft position, air flow, inlet air temperature, and oxygen sensor are common problems that may occur. The engine leakage caused by the sensor is lit, and the engine fault lamp can be eliminated by replacing or adjusting the corresponding letter search sensor.

Baojun 360 engine failure light light and solution: there are two oxygen sensors, respectively before and after the three-way urging and dressing device, and the role of the oxygen sensor hall leaker in different positions is different. The front oxygen sensor detects the air-fuel ratio of the engine under different operating conditions, and the car computer adjusts the fuel injection amount and calculates the ignition time according to the signal.

The function of the rear oxygen sensor is to detect whether the three-way catalytic converter is working properly. The effect of an abnormal oxygen sensor is that the mixture is too thin or too thick, which can light up the engine fault light.

What should I do if the Baojun 630 engine failure light is on? First check the water temperature gauge and the oil pressure alarm light. If there is no alarm, the car can still be driven, but at this time, you must pay attention to controlling the speed and drive to the maintenance station in time for inspection.

If the water temperature is too high or the oil pressure warning light is on, you should pull over immediately and call the maintenance station for rescue.

The engine fault light is on the solution.

1. Clean the engine.

Once the engine failure light is on, the owner should clean the engine in time, and there are two correct cleaning methods: go to the repair shop to clean the carbon deposits with a special cleaning agent. Clean the entire rental fuel system with good fuel additives, including removing carbon deposits from the cylinder.

2. Add higher grade gasoline.

After the engine cleaning, because the compression ratio of the current automobile engine that meets the national IV emission standard is generally above, this kind of car is not suitable for long-term gasoline below 95. In order to keep the engine in good working condition, the owner can choose to add 95 or 97 gasoline, which can usually solve the problem of the engine failure light on.

3. Improve fuel quality.

Since the domestic fuel cannot meet the requirements of the current high-efficiency engine, it is necessary to improve the quality of the fuel by yourself. For example, using good fuel additives to improve the cleanliness level of fuel should be the best way.

Photo by Li Yuanli) @2019

Summary. Baojun is an independent automobile brand created by SAIC-GM-Wuling in 2010, and the original meaning of the Baojun brand is "Jun", which is people's most beloved good horse. Baojun Automobile fully integrates the superior resources of SAIC, GM and Wuling, and the brand is positioned as a "reliable partner", with the brand spirit of "optimistic and enterprising, stable and reliable, smart and confident", aiming to provide consumers with an automobile brand with "international standards and high reliability, low cost of ownership and use, so that customers can maximize the value of ownership, and exceed customer expectations".

On August 9, 2011, Baojun's first model, Baojun 630, was officially launched, positioned as an "international quality new family car", with international design quality, global procurement quality, GM manufacturing system, GM global experiment four guarantees, from product development and design to parts purchase, including vehicle production verification, and follow-up marketing channels, are strictly in accordance with GM's global standard system, and effectively build a trustworthy "reliable partner" brand for consumers. On June 21, 2017, the word and figurative trademark of "Baojun", the leading passenger car brand of SAIC-GM-Wuling Motors, was recognized as a well-known trademark in China.

Hello, dear, the question you asked, here is the following answer for you: This is generally an exhaust gas problem, you see if you add inferior oil.

If you can drive normally, it generally doesn't matter if it's inferior oil.

If there is an abnormality, read the code to see the specific engine failure.

I'm all added in regular PetroChina.

In this case, there may be occasional failures, and if you can drive normally, you can open it again or read the code to take a look.

Baojun is an independent automobile brand created by SAIC-GM-Wuling in 2010, and the original meaning of the Baojun brand is "Jun", and Baojun is people's most beloved sail and good horse. Baojun Automobile fully integrates the superior resources of SAIC, GM and Wuling, and the brand is positioned as a "reliable partner", with the brand spirit of "optimistic and enterprising, stable and reliable, smart and confident", aiming to provide consumers with an automobile brand with "international standards and high reliability, low cost of ownership and use, so that customers can maximize the value of ownership, and exceed customer expectations". On August 9, 2011, Baojun's first model, Baojun 630, was officially launched, positioned as an "international quality new car", with the quality of international travel travel meter, global procurement quality, GM manufacturing system, GM global experiment four guarantees, from product development and design to parts purchase, including vehicle production verification, and follow-up marketing channels, are strictly in accordance with GM's global standard system, and effectively build a trustworthy "reliable partner" brand for consumers.

On June 21, 2017, the text and graphic trademark of SAIC-GM-Wuling Motors' **** passenger car brand "Baojun" was recognized as a well-known trademark in China.

I've seen it before, and I said that the fuel is not exhausted, and the code is cleared, and it does not affect the use of the car.

If you are driving normally now, you can clear the code.

If it is not normal, it depends on whether there is a fault.

You have a lot of chance of happening.

Then he doesn't have to worry about it.

Don't dislike looking annoying words.

Reasons for reference only: 1. The sensor is damaged, the contact is poor, or the signal is interrupted; 2. Poor engine maintenance; 3. The quality of fuel and oil is not good; 4. The combustion of the mixture is insufficient; 5. Spark plug failure, ignition coil failure; 6. The fuel pump is faulty and the oil circuit is blocked; 7. The air conditioner filter is blocked.

The specific situation is analyzed as follows; 1. Sensor problems; When these sensors are damaged, the contact is poor, or the signal is interrupted, the ECU of the car cannot accurately obtain the engine data, and the engine fault light will be on. 2. Maintenance problems; Poor engine maintenance is the most common cause of engine failure to light up. We know that vehicles have a certain maintenance cycle, if the owner's driving habits, then it will increase the burden of engine operation, and finally can only remind you through the fault light to care about your car 3, oil quality problems; The oil quality here includes fuel and engine oil, we know that the fuel filled by the car is generally marked, and the engine oil is also semi-synthetic and fully synthetic, the manufacturer will generally recommend the owner to use which grade of fuel, what type of engine oil, if the owner does not add as required, it will cause wear and tear of the engine in the long run, and the fault light is not to blame.

Poor combustion of the mixture; The failure of the spark plug, ignition coil, fuel pump, and oil circuit blockage of the engine will cause poor combustion of the engine mixture. Poor combustion of the mixture is caused by the problem of engine carbon deposition or knocking, and these will eventually be detected by the engine's oxygen sensor and reported to the ECU, which will naturally turn on the fault light to warn of the intake air intake problem; When the engine burns, it needs to take intake, the air filter element is very important in this process, if the air filter element of the car is not clean, it will affect the air intake of the car if it is not cleaned regularly, and it will be blocked for a long time, and if it is serious, it will cause the engine failure light to turn on. pressurized seepage shed problem; Intake booster lines and turbochargers can also cause engine failure lights to illuminate.

The most common of these is turbocharger damage, and at the same time, the vehicle will also have oil leakage, large oil consumption, and power loss.

The Baojun 630 turn indicator lights up by itself is why the indicator lights up by itself, which may be a problem with the steering system and the steering circuit. The steering system fault indicator is a type of indicator that resembles the shape of a steering wheel. The turn signal system consists of a flash relay (a simple wheel is called a flasher), a turn switch, a turn signal, and a turn indicator.

When the hazard warning signal switch is turned on, all turn signals flash at the same time, indicating that the vehicle is in an emergency and other vehicles are asked to avoid. The blinking of the turn signal is achieved by a flasher that controls the current break, and the frequency of the flashing is that some car turn signal flashers are shared with the hazard warning flasher, while others are set separately. There are many reasons to turn on the power turn warning light, and it can be accompanied by heavy steering, abnormal steering noise, steering wheel shaking, and poor steering wheel alignment.

Faults in the steering system can be checked by following these steps:1. Check the steering gear, steering pump control valve, oil cup filter, steering oil, and clean the entire power steering system; 2.

Check the tire pressure, and replenish the air in time when there is no air; 3.Check the tubing connection and tighten the connecting bolts; 4.Check the power steering pump or power steering.