Does it matter if the wheels are scratched by the road teeth?

Whether it matters if the wheel is scratched by the road tooth depends on the degree of the wheel being scratched, if the situation is more serious, you need to go to the repair shop for repair.

The hub is the rotating part of the wheel core that is connected by the inner profile of the tire steel through the column, that is, the metal part that supports the center of the tire mounted on the shaft. Also known as the rim.

Rims, wheels, tire bells. There are many types of hubs according to diameter, width, molding method, and material.

The road tooth, that is, the shoulder of the road.

Or curb, which is spoken in the Northeast dialect"The road cliffs"。Refers to the part where the road meets the sidewalk. It can also be called "Dao Yazi".

Scrape, a commonly used word in Chinese.

Pronounced as guā, it was first seen in Shuowen Xiaozhu, that is, "Shuowen Jiezi".

Handle also. From the sound of knives. Ancient Eight Cuts". From the knife, from the tongue. Licking like the tongue of a knife is the paradigm of scraping. The original meaning is to remove something from the surface of an object with the blade of a knife, and by extension, it means "plundering property like the tongue of a knife", "smearing on the surface of an object", and is used as a surname.

Matter.

It doesn't matter if the wheel is scratched by the road tooth, it depends on the degree of scratching of the wheel, if the condition is more critical, you need to go to the repair shop to repair it. Whether it matters if the wheel is scratched by the road tooth depends on the degree of the wheel being scratched, if the situation is more serious, you need to go to the repair shop for repair.

Wheel precautions.

It is necessary to pay attention to the repair of automobile wheel hubs, and the matters to be paid attention to are to check whether there are cracks on the surface of the wheels before overhauling, if there are cracks, the cracks must be dealt with first, otherwise rash repairs will not only not solve the problem, but will bring greater damage to the wheels.

A small way to judge is to touch the surface of the wheel with your fingers to see if there is any roughness, if it is smooth, then there is no crack, if it is not smooth, then further check to see the location of the crack.

Matter. If the edge of the wheel is badly scratched, it needs to be repaired, otherwise the tire may not be in close contact with the tire and cause the tire to leak. If the wheel is not repaired for a long time, the scratched part may wrinkle and expand, and it may cause rust and corrosion.

The wheel hub is damaged to deformation, which is considered to be serious, has affected the driving of the vehicle, and needs to be repaired in time, or even replaced directly.

Whether it matters if the wheel hub is scratched by the road teeth depends on the degree to which the wheel is scratched, which can be divided into the following three situations:

1. If the edge of the wheel hub is seriously scratched, it needs to be repaired, otherwise the tire may be leaked due to the lack of close contact between the wheel hub and the tire.

2. When the wheel hub is scratched to expose the primer, it also needs to be repaired, if it is not repaired for a long time, the scratched part may be wrinkled and expanding, and it will lead to rust and corrosion.

3. The wheel hub is damaged to deformation, which is considered serious, which has affected the driving of the vehicle and needs to be repaired in time, or even replaced directly.

There are several situations in which balancing is required:

1. Replace new tires or repair in the event of a collision accident;

2. One-sided eccentric wear of front and rear tires;

3. Feeling that the steering wheel is too heavy or floating and trembling during driving;

4. When driving forward, the car deviates to the left or right.

The wheel hub is only scratched on the surface of the scratch, the paint surface is off, then it does not need to be replaced, and the scratching area is relatively large, but it does not affect the normal use, it also does not need to be replaced.

In addition, a piece of the wheel has been rubbed off, as long as it is not on the very edge, there is no need to worry, this situation just needs to be repaired. But if a piece is rubbed off the edge, then it is necessary to replace the wheel, because this will affect the air tightness of the tire, and in extreme cases, it will also burst the tire, which will be a safety hazard.

Not to mention the deformation and fracture of the wheel, the tire must be replaced, which cannot be solved by repair.

The wheel of the car is scratched when it touches the road tooth, how to repair it?

It matters! Needs to be fixed!

Although it is only a simple scratch will not affect the normal use and safety of the wheel, but because the surface of the wheel itself has a layer of metal protective film, if it is not repaired in time after scratching, it will directly affect the service life of the wheel, and even affect the future driving safety. Generally speaking, there are the following six steps in the hub.

The first step is to check the scars: the wheels have been scratched, and the scars will naturally exist, but after the repair starts, you still need to check the scars in detail again, and confirm the next repair plan according to whether the scars hurt the inside. In the absence of damage to the medial, simple repair is sufficient;

The second step, clean up the dirt: due to the relatively special location of the hub, so there will be more dirt in itself, and the dirt should be removed first in the repair. If there is an unmanageable dirt in the scratch area, you can use something like a toothpick or cotton swab to help remove it;

The third step is to paste adhesive tape around the scars: in addition to ensuring the service life of the wheel hub, repairing the wheel scars is also useful to restore the aesthetics. Therefore, after the repair begins, we should try to prevent the paint from being applied to places other than the scars, and the best way is to put adhesive tape around the scars;

The fourth step is to use the tip of the brush to apply paint: what is needed here is to be careful, otherwise it will be more unsightly after repair, and there will be a feeling that the gains outweigh the losses;

Step 5: Apply soapy water: The main purpose of this is to make the surface of the repaired hub smoother;

Step 6: Polishing and waxing: If you want the repaired hub to look as beautiful as before scratching, polishing and waxing are also two essential steps.

If the wheel of the car is scratched by the road tooth, the light can be thrown off, and if the condition is serious, it should be repaired by a repair shop. Or replace the wheels with new ones. Generally, if there is no exposed primer, it will only affect the aesthetics, and there is no other harm, so there is no need to repair it;

However, if the wheel scratch has exposed the primer, then it needs to be repaired, because if the primer is not repaired after the primer, then after a long time, the scratched part will be wrinkled and the scope will be expanded, and it will also rust and corrode, and the scratch area is relatively large, which will affect the aesthetics of the sheet metal paint shop to repair it.

If the material of the wheel is plated and polished, then there is no need to repair it, because the cost of repairing this material is too high to be worth repairing.

If the wheel is rubbed against the road, it depends on the degree to which the wheel is scratched, and it is necessary to repair it if it is serious.

If the boundary of the wheel hub is seriously scratched, it must be repaired, otherwise it is very difficult to grind Tentenneng, and the tire will not be in close contact with the tire and cause the tire to leak. If the wheel is not repaired for a long time, the scratched position may wrinkle and develop, and the rear side will continue to cause rust and erosion.

The wheel hub is damaged to deformation, this kind of situation is a relatively serious extent, it has already endangered the driving of the car, and must be repaired immediately, or even directly dismantled and replaced. If the level of wheel scraping is not large, there is no need to do rotor dynamic balancing. If the wheel hub is scratched and needs to be replaced, then the rotor dynamic balance test must be done.

What is a car wheel?

Automobile wheel refers to the accessories used to carry the hard moment of inertia between the car and the tire, which can also be called wheel rims, steel rims, etc. The complete hub unit, including the car bearings, also known as flanges, is matched with the tires to support the wheels. The main role is to affect the size of the brake specification, as well as the choice of tire specifications, the larger the wheel hub can be put down, the larger the brake system, the wider the wheel hub can be used, the higher the performance of the widened tire.

The early cars did not have car wheels, but used simple two-bearing units, using tires close to solid, and solid tires were extremely poor in all aspects, whether it was performance, whether it was performance, or driving comfort. The result is a combination of the wheel hub and the tire, which is responsible for the direct contact with the ground and the soft pressure of the car's driving inertia, and then the strong wheel hub bears the hard inertia pressure.

Hello, as long as the wheel is not deformed, the tire has no air leak, there is no effect, do the wheel repair painting can be back to normal, it is recommended to go to the repair shop to check the tire.

It is important that the wheel hub is scratched by the road tooth, because it can lead to a safety hazard in the car's wheel hub. It is difficult for car owners to avoid scratches on the wheels, and sometimes it seems to be just some minor problems.

But this is not the case. Most car owners don't care about the wheels being scratched, but this should not be done. Regardless of whether the wheel scratch is serious or not, it may lead to the existence of potential safety hazards, and even if it is serious, it will bring indelible damage to the car owner, so it is very necessary for the car owner to keep an eye on it.

The wheel is scratched by the road tooth, is it necessary to repair it? Judging from the wear of the tires and hubs you photographed, whether your car can continue to drive with confidence depends on the specific damage. 1. If the tire wall of the car is scratched at a relatively thick place, and the tire wall is only slightly bruised, then there is no problem, the main thing is to do a fire repair to rest assured.

2. If the tire wall has been cracked or cut, then the tire has been scrapped, even if the tire can be driven in the city after repair or repair, then do not drive at high speed, after all, life safety is more important. 3. The wheel hub of the car only needs to be repaired, and the grinding process should be done, and then the place should be closed with glass glue and other things to avoid rust in the future. Small injuries are completely unnecessary, and you will get used to them later.

Haha, just kidding, if you think you have obsessive-compulsive disorder that can be fixed, basically** is around 300 a wheel. Care should also be taken during driving to avoid "hard damage" caused by scratches to the wheel, and once there are scratches or deformations, they should be repaired and repainted as soon as possible. There are six specific steps to patching:

The first step is to check the scars, if they do not hurt the inside of the wheel, they can be simply repaired, using paint diluent, wipe around the scars, and remove dirt; In the second step, it is difficult to remove the dirt from the deepest scratch part, so you can use a toothpick to clean it thoroughly; Step 3: In order to prevent the unrelated parts from being painted by mistake, it is best to carefully apply the adhesive tape around the scar; The fourth step is to tidy up the tip of the brush and apply the retouching paint, which shrinks slightly after the paint dries, and it is best to paint it slightly protruding; The fifth step, after painting, will take about a week to dry completely. After drying, apply with water-resistant paper dipped in soapy water to smooth the surface; The sixth step is to wipe it with water-resistant paper, polish it with a mixture, and then wax it.

If you encounter a deep scar, it is important to observe whether the metal surface is exposed, and if you can't see the metal surface, it will not rust, so you can concentrate on applying retouching paint. Dotted on little by little with the tip of the pen and wait for the lacquer to dry completely. @2019

It is necessary, dear, timely repair can prolong the service life of your wheel, I hope you pay attention to safety when driving.