What is the introductory drawing method of the gourd hot stamping tutorial?

The material tool you need to prepare for branding on a gourd: an electric soldering iron.

Gourd, pencil.

The specific method steps are as follows:

1. First use a pencil to draw the figure you want to burn, as shown in the figure below

2. After that, use an electric soldering iron to draw along the previous line, as shown in the figure below

3. Grasp the stay time of the soldering iron, and use the stay time to draw different depths and lines, as shown in the figure below

4. Finish the pencil line drawing, and the drawing will be done, as shown in the following figure:

1. You need to prepare an electric soldering iron and a hoist, and the selection of the electric soldering iron needs to be changed to different models according to the size of the painting. Then choose the materials for the painting, and try to copy the themes of old paintings, famous paintings, and good painters.

2. Generally, two-year-old gourds with good leather are used for branding. Because after a year of air drying, sun exposure and playing, the gourd is pure in color and dry in water, which is suitable for branding and coloring, and branding out the depth and shade. First, use a pencil to draw the lines and outlines you want to draw on the gourd, which is equivalent to making a draft, so the chance of success is higher.

3. Then you can use an electric soldering iron to draw along the lines drawn with a pencil before use, and basic beginners can also practice with bamboo chips. It is necessary to grasp the time when the soldering iron stays, so that different depths and lines can appear, of course, if you don't grasp it well, it is possible to burn through the gourd if you hesitate.

5. If you don't have painting skills, you can search for some completed drawings or buy drawings directly, so that it is convenient to copy the drawings directly, and continue to practice from simple to complex. The soldering iron tip can be transformed into the desired shape, such as a brush, so that the strokes, thickness, strokes, and techniques of the characters can be reflected, and various techniques of painting such as 皴, dyeing, and so on can also be expressed.

6. You still need to practice the words well, because calligraphy and painting are one, and no matter how good the painting is, it is not a perfect work. In addition to the electric soldering iron, you can use a dedicated soldering machine for painting, and you can also use your own earthen tools for fun.

Tips for hot drawing of gourd:

1. Before the gourd is painted, we must first screen the gourd you need, we can see that the gourd is large and small, the shape is different, and even the color is deep and shallow.

2. If the lines are intermittent and incoherent, it will destroy the charm of the picture and make people look awkward.

3. The temperature of the gourd should be suitable when painting, and the temperature should be adjusted according to the color depth on the picture.

Painting Basics Tutorial: Steps on how to draw a gourd.

The gourd leaves are palm-shaped. First point on the upper left side of the stroke, gray ink dipped in thick ink from the leaf tip to the inside, and then under the first stroke, in the same direction with the same stroke method to point out the second stroke, this stroke is larger, so the pen.

Press harder. The third stroke is still from the tip of the leaf to the inside, and the width of its shape is greater than that of the second stroke, and the ink color should change significantly. The fourth and fifth strokes are from the leaf base outward. The tip of the fourth pen is dipped in water first, and then pointed.

into the right side, the width is approximately the size of the third stroke. Then point to the fifth stroke, this stroke should deliberately move the position of the point upward, and take the same as the first stroke, in order to express the concave of the leaf center. When it is half dry, it is slightly darker in ink, and it opens from the heart of the leaf towards the Wubi Bridge.

Outline the main disk at the leaf tip, and then write the ribs. Hook tendons with a pen should live, with an intermittent folding pen, through the mention and press of the virtual and real sketch. It is better to keep it simple.

The gourd vine belongs to the vine entwined vine, the young vine is the majority, often drooping, and the branches and stems are flexible and straight. Its brushwork needs to be soft and rigid, with few twists and turns, and the frustration is not very obvious, mainly bending and circling winding. Painting vines should be used to use a long sharp hard ("stone badger" class) hanging wrist twist pen, with cursive calligraphy brushwork freely press the turn, dry and wet thickness changes with a wave of the pen.

The ink color is dry and dry. The branches should be simple and not complicated, a few strokes can be summarized, to follow its rules, not to ignore the structure of the vines.

The painting method of gourd fruit is the point stacking method, with thick garcinia cambogia dipped in ochre, starting from the top of the upper part, first draw a stroke on the left side, and then draw a pen on the right side by thin and thick, and the two strokes constitute the shape of the upper part of the gourd. The remaining color on the pen is arced from left to bottom, with the tip of the pen running outward. Then draw a stroke on the right, and the method is the same as before.

Then turn the noisy pen and wipe it in the blank part of the middle, that is, complete the entire shape of the gourd. Another method is to wipe off the residual color of the nib, dip it in water and point into the blank area, both methods. Finally, while it is wet, add the long handle and point pedicle of the gourd, and place the umbilicus in the lower part of the appropriate position.

1. For beginners to learn gourd painting, you can buy a simple one first. For example, a portable branding machine, a general gourd is sufficient.

2. If you want to learn further, you can buy two machines, one is a branding machine, which generally has four sockets, each with two rendering pens and branding brushes. There are also a variety of nibs, which are equipped according to the requirements of the picture. Then you can buy a flamethrower for large-area rendering, and use it with a branding machine.

The branding machines are all temperature adjustable.

3. Learn some knowledge of art and painting, improve skills and aesthetic accomplishment, and lay a foundation for creation.

An electric soldering iron, as well as a fixed hoist, is not easy to draw, and the gourd must be polished in advance.

The soldering iron can not be too powerful, and it is necessary to practice more.

Gourd hot painting, also known as gourd branding painting, fire brush painting, that is, the artist uses an electric soldering iron to iron out the brand marks on the object to paint.

The gourd hot stamping is generally not peeled, and it is a gourd with better leather that has been preserved for two years. After one to two years of air drying, sun exposure and playing, the gourd is pure in color and dry in water, which is suitable for branding and coloring, and branding out the depth and shade.

After the gourd is picked, it is necessary to pay attention to three points: first of all, avoid strong sunlight, and the reason why the gourd is colored after a year is to not have to be colored in the sun after painting. Secondly, when placed indoors, often wipe with your hands or cotton cloth to make the gourd starched, and the scars will not fade after the pulp.

Then there is to put it in a carton when it is not placed to prevent moisture, chemical attack, bumps, and moths. When maintaining insect control, you can wrap a little pepper in a small cloth bag and put it in the gourd.

1. Soak the gourd in a hot water basin for an hour.

2. Take it out, dry it and let it dry for 10 minutes.

3. Use a card to scrape the skin from top to bottom, and the strength should be even. **The card is a bit soft, preferably with a plastic card.

4. Put it in water and take the loofah to brush off the remaining skin and flesh vigorously, rinse it to make the surface smooth.

5. Wipe it dry and hang it with a rope.

Summary. Materials and tools needed to paint on a gourd: an electric soldering iron, a gourd, and a pencil.

The specific method steps are as follows:

1. First of all, you need to prepare a pencil and a gourd, and use the pencil to draw the shape you want to burn out on the gourd. 2. After the figure is drawn, use an electric soldering iron to draw along the lines drawn with a pencil before. 3. It is necessary to grasp the time when the soldering iron stays, so that different depths and lines can appear, of course, if you don't grasp it well, it may burn through the gourd.

4. After some operation, a complete picture on the gourd is baked.

Draw on the gourd.

Materials and tools needed to paint on a gourd: an electric soldering iron, a gourd, and a pencil.

The specific method steps are as follows:

1. First of all, you need to prepare a pencil and a gourd, and use the pencil to draw the shape you want to burn out on the gourd. 2. After the figure is drawn, use an electric soldering iron to draw along the lines drawn with a pencil before. 3. It is necessary to grasp the time when the soldering iron stays, so that different depths and lines can appear, of course, if you don't grasp it well, it may burn through the gourd.

4. After some operation, a complete picture on the gourd is baked.