What do you need to pay attention to when sticking your own fish tank? What are the steps?

I made 8 fish tanks, but I didn't make them big, and the largest one was about a meter. Now I think it's time to get started.

Let's talk about the glass first, and make a fish tank to calculate whether it is a side bottom or a side bottom. I don't want people to want to use a side-wrapped structure. Because the master of marking glass is an error of 2mm. Think about it, the glass of some small fish tanks is only 5mm that glue connecting surface...

The size given to the master before scratching the glass should be calculated in terms of the thickness of the glass, which everyone knows.

The glass drawn back should be measured by yourself, where to use it, and there should be an error to see if it can be adjusted. Then make a note of where each piece is placed and clean the connecting surface. Then glue and put glass, which is actually nothing if you practice more.

Isn't it just a hitchhiking? Have you played it all! The glue should be evenly beaten, in line with the principle of only more, no less.

The order of bonding can be to follow the large surface, then the two sides and then the front. It's best to put it on one side and don't move it, and move it with more bubbles.

Finally, the fish tank is fixed with tape, and the next day it is glued and stretched. It's better to be a stretch and don't ask for people (do it yourself, give your own name.) Hey. ）

For the sake of insurance, try the water after 5 days, as long as the glue is laid, there is no water leakage, only the glue is running around. Hehe, there are many ways to keep the glue from running around, the simplest is to paste tape or masking paper on the left and right sides of the connecting surface like paint, and remove the glue after it is finished, or not stick it inside.

It's actually very simple to make a fish tank by yourself, it depends on whether you want to move it or not, and when others ask, you made it yourself. I feel a sense of accomplishment.

White palm. It is important to be careful to repot them in the right season, because if you repot them in a season that is not suitable for repotting, it will speed up their death. The best time to change pots is when winter has just arrived, during this time, both temperature conditions and its physiological conditions are very suitable for pot change, not only not easy to kill but also can make it quickly adapt to the new growth environment.

1. Repotting time: white palm should be repotted every 1-2 years, which can be carried out in spring and autumn, as long as the weather of high temperature and low temperature is avoided, but most people are accustomed to repotting and combining branches in March and May every year. In addition, when changing pots, according to the size of the plants, you can divide the plants reasonably, so that one pot of white palms becomes two pots.

2. Soil: When changing pots, humus soil + peat soil is generally used.

A small amount of perlite.

Mix. In addition, a small amount of organic fertilizer is added to the soil as base fertilizer to make the white palm grow better.

3. Pruning: Combined with repotting, pruning the root system, removing some old roots and overly long roots, removing the old soil, and replacing it with new cultivation soil.

to facilitate the flowering of white palms.

Materials: a bottle of glass glue for architectural decoration, five pieces of glass of 1cm 2cm, plastic plates, etc.

Steps: 1. Cut the glass according to the size, and polish each side of the glass: a piece of fish tank bottom glass + four pieces of enclosure glass.

2. Stick the bottom glass and the opposite sides first, wait for 3 or 4 minutes and then stick the remaining two opposite sides.

3. Can't move, wait for curing, 24 hours is the best.

4. Hold the fish tank on the side upright, and place it normally - the bottom is facing down.

5. On the inside of the bathtub, all the gaps where the glass is connected are made with glass glue again, and smoothed out. (Prevent water leakage).

6. Finally, add the fish tank cover of your own design, plus the aeration device. Everything is ok!

The use of fish tank glass glue and precautions are interpreted from the most professional perspective.

Measure the size, pull the glass, first stick the width and grow a corner, and then stick the opposite corner, fix it on the corner with a rubber strip, the main attention is to apply the glue evenly, not more or less, and use the glass glue well.

First, compare the marked glass to good and good, and confirm that the joint surface of the glass can be cleaned. Then prepare the required support rods, and the transparent tape is basically ready. It should be noted that the glue should be evenly applied, the amount should be sufficient, and the action should be fast and accurate. Try to get it right the first time.

Flatten the bottom glass. Then glue the glass on the back. Then glue to the glass at the bottom.

Then glue one of the pieces on the side.。。 After gluing, fix it with transparent glue and the glass on the back, and then glue another piece of side glass.

And so on. Finally, it's the glass in front of you. After gluing. After the glue is dry, the glue is patched between the glass and the glass inside. It is very important to leak or not to leak. Then just wait for the glue to dry through.

Lao Wang's fish tank is glued with glass.

The fish tank is basically made of glass, so it is glued with glass glue, transparent, neutral, like Pushjie structural adhesive.

Fish tanks are generally made of glass, of course, with glass glue.

Use acidic silicone glue on the second floor of the brand, you come in and look for it, generally 10 yuan or 15 yuan a piece can be used.

1. For manufacturers, almost all of them are bonded by ultraviolet curing glue (also known as shadowless glue or UV glue), but this bonding usually requires an ultraviolet light source such as a certain power ultraviolet lamp or illumination with self-ballasted high-pressure mercury lamp or natural sunlight.

2. For ordinary bonding, transparent glass glue (silicone rubber) can be used. This type of glue has good caulking ability, but the transparency is not as good as that of ultraviolet glue.

WACKER Germany, Gold Medal Changlu, Dow Corning, and Kuaida are all good, and I use Changlu.

Because it is a new fish tank, it will not have a taste after a while, and it will be good to wash it without disinfection. Soak in water for a while.

Main species: a. According to the type of material:

Ordinary glass --- emerald green, fragile, not very transparent, easy to age and deform under rain and sun, try not to use it to make fish tanks.

Float glass - transparent float glass is made of glass gypsum that enters the tin bath through the control gate, floats on the surface of the molten tin due to gravity and its own surface tension, and then enters the cold tank, so that the two sides of the glass are smooth and even, and the ripples disappear. Dark green, smooth surface without ripples, good perspective, with a certain toughness.

Tempered glass, laminated glass - tempered glass is a kind of high-strength safety glass obtained by heating the glass to the softening point and then sharply air cooling. At the same thickness, the flexural strength of tempered glass is 4 5 times higher than that of ordinary glass, and the impact strength is 5 times higher than that of ordinary glass.

Tempered glass has a strong level of thermal stability and the ability to withstand drastic temperature changes without damage. The biggest feature of tempered glass is safety, this kind of glass is broken into honeycomb-like particles, which can avoid harm to the human body. Note:

The tempered glass can no longer be cut, drilled, slotted, etc. Because the glass shatters into honeycomb-like particles, it is completely irremediable, so it is not recommended to use it on aquariums!

Acrylic glass --- similar to a glass material between plexiglass and ordinary glass, which was originally used in airplanes, and most of the early angled fish tanks were made of acrylic glass, which is light in weight and has strong toughness, and must be made in one piece, easy to scratch (a bit like the characteristics of plexiglass) with low transparency!

Plexiglass---PMMA, commonly known as plexiglass, is an important thermoplastic developed earlier, with good transparency, chemical stability, easy dyeing and easy processing. However, the strength is low, and the aquarium is generally not used except for some small process cylinders (boxes).

Ceramic --- ceramic craft fish tank is suitable for home decoration.

There are many types of stone ---, the common ones are, jade fish tank, duanyan stone fish tank, bluestone fish tank, white marble fish tank, marble fish tank, bluestone fish tank, sandstone fish tank, travertine fish tank, etc.

Two. According to the structural form: rectangular, single arc, double arc, round, semicircular, wavy, spherical, cylindrical, annular shape, conical shape, U-shaped cylinder, bullet, etc.

Three. According to the appearance of the art: Chinese, European; Modern, classical.

Four. According to water quality: seawater tank, fresh water tank.

Five. According to the nutrients: fish tank, grass tank, reef tank, turtle tank, ecological tank, etc.

Six. According to the installation method: screen cylinder, top cylinder, wall-mounted cylinder, embedded wall cylinder, angle cylinder, window cylinder, desktop cylinder, etc.

Seven. According to size: large tank (aquarium), small tank (aquarium), household fish tank, micro tank (mini tank), etc.

Is it a saltwater fish or a freshwater fish? Freshwater fish is very easy to do, there is a filter, a heating rod, a suitable light is good, the sour smell of glue is a new fish tank will have, you take it home too early, of course, after a period of time the taste will be gone, do not need to disinfect, wash and wash. If it is a seawater fish, it is more complicated, first you have to buy seawater, adjust the seawater in proportion, and the aquatic plants are not easy to buy, and the rest are the same as freshwater.

Soak potassium permanganate for 2 hours to sterilize and then need a circulating water pump and filtration system so that tropical fish don't have to break into the tank. Let's go straight down. No problem.

What to deal with, I don't understand, tropical fish you want a constant water temperature, you buy a heating rod, preferably living water, buy a filter, plus a light source, a sunshine lamp or something.

After the fish tank is glued, it is best to add water after 3 days, let it depend on the size of the fish tank, if it is too high, be sure to let the glass glue completely dry before adding water. After the glue is dried, it is necessary to disinfect it with potassium permanganate bubble tank (take a small amount of potassium permanganate and soak it in water for a day).

If you buy your own materials for professional glass, you can install it, so how to stick the fish tank, do you know the specific steps, and I will give you a specific introduction. What is the purchase method of fish tank, the material of different fish tanks and the demand for fish tanks, the selection methods are different, let's take a look. Fish tank everyone knows, is a very good decoration of the home type of products, you can also make your own fish tank, if there is professional glass, you can buy your own materials can be installed, so how to stick the fish tank, do you know the specific steps, I will give you a specific introduction.

How to stick a fish tank

1m cylinder with 1 glass glue glass gun on the line, to see the function of glass glue, stick to the cylinder to use "structural glue". If the "sealant" is misused, the water will leak within a year. Neutral glue for seawater tank, acidic glue for freshwater.

It is recommended that you do not immediately glue the sub-adhesive cylinder, find some rotten materials for test sticking and scraping, glue and scraping a bit of technical content, and the uneven selling is affecting the long-term beauty of the cylinder.

First hit the joint between the two glasses, and then hit the corner glue between the glass, and the indirect joint between the glass and the glass can be glued with stickers to fix the position and then the corner glue, which will be simpler.

How to choose a fish tank

Determine the size of the fish tank: The size of the fish tank is determined by the location.

Selection of fish tank material: The material of the fish tank is generally divided into glass and acrylic, and the glass is divided into float glass and ultra-clear glass, and the transmittance and brightness of ultra-clear glass are generally better than float glass, but they are also more expensive; The light transmittance of the acrylic fish tank is comparable to that of ultra-clear glass, which is more suitable for special-shaped fish tanks.

Choose according to the fish species: Buying a fish tank depends on what kind of fish to raise, what kind of fish to raise, what kind of fish tank and filtration system.

The above content introduces the problem of how to glue the fish tank, which needs to be glued with glass glue and glass, and pasted according to the specific methods and steps. What is the purchase method of the fish tank, for example, you need to determine the size of the fish tank first, the selection of the material of the fish tank, and the selection of fish species, etc., are very important contents of the purchase of fish tanks, and we need to know more about the relevant content.

1. Clean it with clean water first, and you can clean it with a clean rag. Wash it about twice and you're good to go.

2. Then potassium permanganate is used, generally speaking, potassium permanganate is still relatively easy to buy and not expensive. The fish tank is filled with clean water, and then a few grains of potassium permanganate are added, and the water will change color, just don't concentrate too much. Then soak for at least 20 minutes, but not too long.

3. At this time, the branches are weak, so use the brushed loofah or other things to tie them with a stick and clean the inside of the bathtub.

4. Then you have to pour the water in the fish tank to defeat it, remember to wash it several times to ensure that there is no residue. After rinsing, the fish tank is left to dry for a while, and it is ready to be cleaned.