How many size engine oil does Dongfeng Peugeot choose?

First of all, there are fully synthetic, semi-synthetic, and mineral oils, and fully synthetic is the best. Fully synthetic, generally there are Mobil, Castrol, BP, German GT these. Generally, the Japanese oil used should not be too sticky due to the engine, and 20 is about the same.

Mineral oil, generally 4000+ has to be replaced, like Mobil, BP can generally run 10000, GT base oil is better, can be 12000. Look at yourself and choose number 97.

In addition to the difference in knock resistance, the other properties of No. 97 oil such as cleanliness and impurities are the same, and it belongs to the same grade of oil.

There is no problem with the new car with 0w30 marking, the mileage can be changed to a higher viscosity of the oil, because the engine has, worn, to change the viscosity of the higher number to ensure the airtightness of the engine, my car is now 120,000 kilometers, with the 0w30 mark of G t magic red oil, the oil quality is very good, the maintenance is stronger than the original factory.

I am now using G T magic red engine oil 0w30, this engine oil is a base oil of four types of PAO, the anti-recession ability is very good, the maintenance mileage is long, basically can be changed to 15000 kilometers, once a year, the quality of the original engine oil is too bad, running a 8000 power or something is not very enough, and I am really much worse than what I am using now.

The oil model used in Peugeot 4008 is 5W30, the special oil is the special lubricating oil for the Total Dongfeng Peugeot engine, and the oil commonly used in the maintenance of the Peugeot 4008 is the Total oil Kuaichi 9000 and the Zeechi 9000 series. Because Total is a French engine oil, ** French Peugeot Citroen car series use, in the manufacturing process will be more considered with the French car engine matching.

Change the engine oil according to the relevant provisions in Dongfeng Peugeot's "Quality Assurance and Maintenance Manual". It is normal to add oil between maintenances. Dongfeng Peugeot recommends that you add oil (or change the oil) every 7500 km if needed.

When you need to pay attention, remember not to mix other engine oils when adding engine oil, otherwise the performance of the engine oil will be changed, and the ability to protect the engine will be reduced.

Oil consumption is related to driving conditions, oil quality, new engines will consume more oil, and it is normal that oil may need to be added between maintenances. Before each long-distance trip or every month, it is recommended that the user check the oil level and make up as needed. When checking the oil level, the car should be parked on level ground and the engine is cold, using an oil ruler.

The oil level is within the upper and lower limits of the dipstick, which is normal, and other conditions will have a certain impact on the engine. Too much oil can easily cause the load on the engine to increase and affect the power; Over time, the engine exhaust ventilation system is also easily damaged, carbon deposition increases, and excessive oil volume will also cause the phenomenon of burning engine oil. Too low oil quantity usually affects the overall lubrication effect of the engine, especially many parts that rely on crankshaft splash lubrication, wear and tear is aggravated or even damaged.

In order to ensure the reliability of the engine and emission control system, it is forbidden to use additives that are not approved by Dongfeng Peugeot in engine oil.

It is enough to use 5w-30 oil, but you need to change the oil filter at the same time as changing the oil, and the oil used in the model is four liters. The cycle of changing the engine oil is to change the motor vehicle every 7500 kilometers, and the vehicle is maintained in strict accordance with the time, and the maintenance of the vehicle is a condition to ensure the safety of the vehicle.

There are a lot of imported oils, I have used a few brands before, they are not bad, water and oil have also been used, it is OK, the imported G T magic red engine oil that began to be used last year, the base oil of four types of PAO, the quality is very good, long-term and durable, the first time I changed it, I ran 15,000 kilometers to change, it is longer than the oil used before, and the addition of esters, the power burst is also very sufficient.

Peugeot recommends adding Shell or Mobil 5w30 fully synthetic motor oil will do. Fully synthetic engine oil has the best lubrication effect among all engine oils, and if you use fully synthetic engine oil, it can play a certain role in protecting the engine, minimizing wear and tear, and prolonging the service life of the engine.

1. Mineral oil.

Mineral oil is the most commonly used lubricant on the market than Hidden Posture. It is the process of fractionating useful substances, such as gasoline and aviation oil, in the petroleum refining process, and then processing and extracting the remaining base oil. Essentially, it uses the worst of the worst ingredients.

Mineral oil** is cheap, the service life and lubricating performance are not as good as synthetic oil, and at the same time, it also has greater pollution to the environment. In addition, mineral oil cannot completely remove the impurities contained in the refining process, so the flow point is high, and it is not suitable for use in low-temperature areas and extreme conditions.

2. Semi-synthetic engine oil.

Semi-synthetic engine oil is the use of semi-synthetic base oil, is the product of mineral oil purified by hydrofission technology on the basis of mineral oil, it is made of mineral engine oil, stove cavity absolute synthetic engine oil in a 4:6 relationship mixture, the purity of semi-synthetic oil is very close to full synthetic oil, but its cost is slightly higher than mineral oil, is an ideal transition product from mineral oil to synthetic oil.

3. Fully synthetic engine oil.

Fully synthetic motor oil is the highest grade of motor oil. It is a lubricating liquid composed of macromolecules composed of ethylene and propylene dispersed from gas or natural gas in the original round oil, and then refined into macromolecular composition through complex chemical reactions such as polymerization and catalysis. In essence, it uses the best ingredients, chemical reaction and artificial control to achieve the expected molecular form, the fully synthetic oil molecules are arranged neatly, the ability to resist foreign variables is naturally very strong, so the physique is better, thermal stability, antioxidant reaction, and the ability to resist viscosity changes are naturally much stronger than mineral oil and semi-synthetic oil, so it is also the highest.

Photo by Li Yuanli) @2019

Hello, I am happy to serve you and give you the following answers: Dongfeng Peugeot Great Wall special engine oil model: CF-4 SJ.

Reasons for the problem:1Oil change is not timely:

The oil change interval is generally 5000 km, and if the change cycle is exceeded, the oil will deteriorate and lose its lubrication effect, resulting in engine failure. 2.Improper oil addition:

Improper oil addition can lead to a decrease in oil lubrication, which can lead to engine failure. Workaround:1

Change the oil in time: change the oil in time according to the oil change cycle to ensure the lubrication performance of the oil. 2.

Add oil correctly: Add oil correctly according to the amount of oil added to ensure the lubrication performance of the oil. Steps:

1.Check the oil: Check the color, turbidity, smell, etc. of the oil to determine whether the oil needs to be replaced.

2.Change the oil: Remove the oil filter, drain the old oil, pour the new oil in, install the oil filter, and check the oil level.

Zheng Zi 3Add engine oil: add the oil correctly according to the amount of oil added to ensure the lubrication performance of the oil.

Personal experience tips shouting Huai Jue: 1Check your oil regularly:

Regularly check the color, turbidity, odor, etc. of the oil to determine if the oil needs to be replaced. 2.Add the oil correctly:

Add the oil correctly according to the amount of oil added to ensure the lubrication performance of the oil. 3.Use the right oil:

Dongfeng Peugeot 5008 uses 5W-40Sn model oil, Peugeot 5008 body length, width and height are 4670mm, 1855mm, 1650mm, wheelbase is 2840mm.

Peugeot 5008 special oil model is: 5W-40SN; The role of Peugeot 5008 oil lubricant is to lubricate and clean the engine. It can be divided into:

There are three types of mine stool oil, synthetic oil and semi-synthetic oil. What is the difference between fully synthetic and semi-synthetic oils? All oils are formulated from base oils and additives.

Overall, the synthetic motor oil contains 100% unconventional, high-performance fluids. Semi-synthetic motor oils (also known as blended oils) contain a small percentage of these high-performance fluids and contain conventional mineral oils.

If the engine is the heart of the Peugeot 5008, then the oil is the blood of the Peugeot 5008. That is to say, engine oil is quite important for Peugeot 5008, in terms of selection, do not choose inferior oil, inferior oil will cause serious wear and tear of Peugeot 5008 engine, affecting the normal operation of Peugeot 5008.

Peugeot 5008 maintenance recommends the use of fully synthetic engine oil; Synthetic oils are used at a wider temperature, with a longer service life and higher costs; The same oil film requirements can be achieved with a lower viscosity of synthetic oil, while mineral oil needs to be more dense than synthetic oil to achieve this requirement. In the same working environment, synthetic oil is more expensive because it has a much longer service life than mineral oil, but after comparing the number of oil changes, it is not much higher than mineral oil.

Photo by Pacific Automobile Network Q&A).

The oil of Dongfeng Peugeot 4008 requires 5 liters, and the length, width and height of the Peugeot 4008 body are 4510mm, 1850mm, and 1662mm, respectively, and the wheelbase is 2730mm.

The Peugeot 4008 oil level can be seen with the oil dipstick of the car engine, and the h on the scale above the oil dipstick means high liquid level; l means low liquid level, the oil is in the middle of min and max, is the most ideal position, the correct way to see the oil dipstick is to turn off the engine after the car is hot, the vehicle is parked on the horizontal road bench on the surface, and then test after ten minutes.

Engine oil is the engine lubricating oil, which can lubricate and reduce wear, assist cooling and cooling, seal leakage, rust and corrosion, shock absorption and cushioning for the engine. It is known as the blood of the car. Engine oil is made up of two parts: base oil and additives.

Base oil jujube envy is the main component of lubricating oil, which determines the basic properties of lubricating oil, and additives can make up for and improve the shortcomings of base oil performance, give some new properties, and are an important part of lubricating oil.

As a kind of machinery, the engine has its common requirements for lubricating oil compared with general machinery, such as appropriate viscosity, certain performance requirements such as anti-oxidation, anti-wear, anti-corrosion and viscosity temperature. But the engine is a special kind of machinery, and its requirements for lubricating oil have its special side. In addition, the more oil is not the better, the higher the oil level, in fact, the greater the resistance of the engine (because the crankshaft needs to constantly stir the oil pan oil to achieve splash lubrication), ideally, the fluid level can be kept in the middle of the position a little lower, at this time the engine resistance is the lowest, the fuel consumption is the lowest, and the lubrication performance can also remain stable.

Photo by Pacific Automobile Network Q&A).

Summary. Hello, 18 Peugeot 300,000 kilometers need to add high viscosity oil, the oil model is 0w40, there are several types of engine oil recommended in this range, a Castrol EXTREME, the market ** 140 a liter, 4 liters 560 plus the filter element, a total of about 700 yuan in labor, two gold Mobil 0w40, 120 a liter, four liters 480 plus machine filter labor, the cost is about 600 yuan, you can also use Shell 0w40 blue packaging 100 a liter, a total of about 560, these three are suitable for your car use, can meet the requirements of the use of the vehicle, I hope mine can help you.

Hello, this question can give you a perfect reply, wait for me to sort out the information, I'm typing, 2-3 minutes, don't finish.

Hello, 18 Peugeot 300,000 kilometers need to add high viscosity oil, the oil model is 0w40 for Xiangzao, there are several types of oil recommended in this range, a Castrol multi-pole protection, the market ** 140 a liter, 4 liters 560 plus the filter element, a total of about 700 yuan in labor, two gold banquet Song Mobil 0w40, 120 a liter, four liters 480 plus machine filter labor, the cost is about 600 yuan, you can also use Shell 0w40 blue packaging 100 a liter, the total file Zheng is about 560, These three are suitable for your car and can meet the requirements of the vehicle, I hope mine can help you.