Is it profitable to open a charcoal factory, and how much does it cost to invest in a mechanism char

The first thing you need to consider when investing in a charcoal processing plant is the raw materials, if the raw materials are below 300 yuan per ton, then you can consider doing this project, and then you need a site, according to the investment budget, generally if it is small, then you need a site of at least 400 square meters, the site has, the equipment purchase roughly needs to invest about 7-110,000 yuan, plus some basic assumptions estimated investment of about 15-250,000 yuan, so that you can handle a charcoal plant with a daily output of one ton, In recent years, the country's strict management of raw charcoal, more and more customers have begun to invest in the production of charcoal, and the use of furniture factory waste to make charcoal has become a trend. Changde Taofa Yuan (Oubao) Biotechnology****, in the machine charcoal and molding biomass fuel line....

Because the raw materials of the charcoal plant are relatively cheap, the corresponding profit will be relatively high. Nowadays, people are paying more and more attention to the protection of the environment, whether in the city or in the countryside, and opening a machine-made charcoal plant, which can use some of the energy used before to be reprocessed and then reprocessed so that people can continue to use it. Open this kind of mechanism charcoal plant, its profit is quite considerable.

1. Now the characteristics of the mechanism charcoal plant can be said to be a relatively small investment, but the market is relatively large, especially this new type of mechanism charcoal, which is widely used in various different industries, such as food, chemical industry, metallurgy, agriculture, environmental protection, etc., and even the barbecue pot in the home and the usual heating in the home can use such fuel.

2. Its market development prospects are very good, and of course, the profit margin is relatively large. As for the approximate amount of profit in a year, it still depends on the operator's own business characteristics, but in general, the profit is relatively good, so you don't need to worry too much.

3. If you want to open a charcoal plant, it is best to choose a more powerful brand, from R&D to production and sales, to achieve one-stop service, especially the developed products have a higher degree of automation, and are more economical and practical.

4. After the launch, it has been praised by people from all walks of life in the market, and of course, it has also brought greater economic benefits to franchisees.

Some of the materials that were previously discarded in rural areas have been reused, and have also made a great contribution to environmental protection.

5. Local prices and profits are different in different provinces, so it is necessary to make a cautious decision after market inspection.

Notes:

1. Metallurgical industry.

In the past, charcoal was used to smelt iron ore and smelt pig iron from charcoal and coke.

Even if the chemical composition is the same, its structural and mechanical properties are still different. The pig iron smelted by charcoal generally has the characteristics of fine-grained structure, tight casting, no cracks, and the pig iron produced with charcoal contains few impurities, which is suitable for the production of high-quality steel. Since charcoal is reducing.

Therefore, in the metallurgical industry, it can be used to reduce ore and smelt metals.

2., the manufacture of carburizing agents.

All steel products that require high surface hardness and wear resistance, and good toughness in the center, should be carburized. The carbon-containing mixture used to carburize steel products is called a carburizing agent. Charcoal alone has a poor carburizing effect.

Therefore, charcoal is often used as raw material, and then a certain amount of contact agent is added to make carburizing agent.

3., carbon disulfide production.

Charcoal is the best raw material for making carbon disulfide, and charcoal used to make carbon disulfide should be hard, heavy in volume and ash.

and small moisture content, high fixed carbon content, the production of 1 ton of carbon disulfide requires about tons of charcoal.

4. Pressing of charcoal bricks.

Crushed charcoal is inconvenient to transport, and the use is also limited, and the method of pressing charcoal bricks can turn small value crushed charcoal into high-quality fuel. Charcoal bricks have low moisture absorption and water absorption, specific gravity and calorific value.

High advantages, but also high mechanical strength in the use process. Calcined charcoal bricks are smokeless and do not produce charcoal dust when burned. Charcoal bricks can be used in metallurgy, mobile gasifiers, etc.

Hello, invest in a mechanism charcoal plant Small and demolition-type charcoal machinery and equipment cover a small area, generally dozens of square meters are enough, and a 100 square meter production workshop is enough. Including warehouses, raw material sheds and storage yards, with a total area of more than 300 square meters. To prepare such a small carbon factory, if you call to build a simple factory with a color steel house, it will generally cost 10,000 to 20,000 yuan, and the land hardening will also cost 100,000 yuan.

The total investment of the plant is expected to be about 30,000 yuan. 2. Three-phase power facilities This investment can be large or small. If there is a transformer station near the plant, it can be produced by simply connecting the wires.

But if you don't have wires, you'll need to connect them over long distances, or apply for a transformer yourself. Such an investment would cost at least 30,000 to 40,000 yuan, or even more, depending on the circumstances. 3. Production equipment Usually, there are these kinds of small charcoal machine equipment; Pulverizer and dryer are indispensable, and there are four kinds of machines: rod making machine and carbonization furnace.

The four machines weigh about six tons and produce about one ton of charcoal per day. At present, the market for such a set of equipment is between 30,000 and 40,000, and the higher may be 50,000 or 60,000, but we calculate it according to the average price of more than 50,000. Including freight and other costs, it is expected to cost about 60,000 yuan to put into production.

4. Raw materials are more flexible in the payment of raw materials, because the carbon raw materials in many parts of the country can be used first and paid later, which can help investors save more costs when investing. Even if you can't get the money, it won't cost a lot of money to prepare the raw materials in advance, maybe between a few thousand yuan and ten thousand yuan. 5. Other expenses The water and electricity costs, personnel salaries, office materials, etc. generated by production, so many expenses are about 100,000 to 200,000 yuan.

If the investor does not have much money in his hands, he can consider buying second-hand production equipment, which can save some equipment money.

Summary. Hello dear, to start a charcoal plant to have a workshop, the last family-type charcoal plant, a charcoal machine production line with a daily output of 1 ton needs about 100 square meters of recommended workshops. And then there's the equipment.

Small thirty or forty thousand can buy good quality charcoal machine equipment. You need to use: crusher, dryer, stick making machine, carbonization furnace these four equipment, of course, if your local raw materials are all sawdust.

When it comes to raw materials, it is necessary to inspect locally, and you need to have sufficient raw materials, such as peanut shells, bagasse, sawdust, and scraps from local wood processing factories or furniture factories, which can be used as raw material resources.

Hello dear, it takes 50,000 yuan to invest in a Mujin charcoal plant. The small wooden brigade charcoal machine and equipment covers a small area, generally dozens of square meters are enough, and a 100 square meter production workshop is enough. Including warehouses, raw material sheds and storage yards, the total area of Xiangzhen Nian is more than 300 square meters.

Hello dear, to start a charcoal plant to have a workshop, the last family-type charcoal plant, a charcoal machine production line with a daily output of 1 ton needs about 100 square meters of recommended workshops. And then there's the equipment. Small thirty or forty thousand can buy good quality charcoal machine equipment.

You need to use: crusher, fuxi dryer, dismantling, stick making machine, carbonization furnace, of course, if your local raw materials are all sawdust. When it comes to raw materials, there is still a shortage of raw materials in the local area, and sufficient raw materials are needed, such as peanut shells, bagasse, sawdust, and scraps from local wood processing factories or furniture factories, which can be used as raw material resources.

<> "Hello friend, it costs between 100,000 and 1 million to open a charcoal factory. The following aspects need to be considered when starting a charcoal plant:1

Land cost: A charcoal plant needs to have a certain amount of land for storing wood raw materials, as well as the production and storage of charcoal. The cost of land varies from region to region, and in general, relatively inexpensive industrial zones are available.

2.Raw material cost: The raw material of charcoal is wood, and the cost of wood procurement needs to be considered.

The cost varies depending on the wood species and**. You can choose a local wood processing plant or forest resources bureau for procurement. 3.

Production equipment cost: The charcoal plant needs to purchase production equipment, including boilers, carbonization furnaces, flue gas treatment equipment, etc. The cost of the specific equipment varies depending on the equipment parameters.

4.Other expenses such as electricity cost, water cost, labor cost: There are other expenses to consider when starting a charcoal plant, including electricity, water, labor, etc., and these costs vary from region to region and need to be estimated according to the actual situation.

Generally speaking, starting a charcoal plant requires a certain amount of capital investment. According to different regions, wood raw materials, equipment selection and other factors, the specific investment amount will also be different. The initial investment may be in the hundreds of thousands to more than one million yuan.

A comprehensive analysis of the local market and operating conditions is required, and a detailed business plan is required to achieve the goal of business success. I hope mine can help you<>

Summary. Hello dear, it takes 200,000 yuan to invest in a mechanism charcoal plant. Small charcoal machines and equipment cover a small area, generally dozens of square meters are enough, a 100 square meters of production workshop is enough.

Including warehouses, raw material sheds and storage yards, with a total area of more than 300 square meters. To prepare such a small carbon factory, if you build a simple factory building of a color steel house, it will generally cost 10,000 to 20,000 yuan, and the land hardening will also cost 100,000 yuan. The total investment of the plant is expected to be about 30,000 yuan.

Hello dear, it takes 200,000 yuan to invest in a mechanism charcoal plant. Small charcoal machines and equipment cover a small area, generally dozens of square meters are enough, a 100 square meters of production workshop is enough. Including warehouses, raw material sheds and storage yards, with a total area of more than 300 square meters.

To prepare such a small carbon family car factory, if you build a simple factory with color steel houses and scattered sails, it will generally cost 10,000 to 20,000 yuan, and the land will also cost 100,000 yuan. The total investment of the plant is expected to be about 30,000 yuan.

Hello dear, usually, there are these kinds of small charcoal machine equipment; The crusher and dryer are indispensable, and there are four types of machines: the making machine and the carbonization furnace. The four machines weigh about six tons and produce about one ton of charcoal per day. At present, the market for such a set of equipment is between 30,000 and 40,000, and the rubber may be 50,000 or 60,000, but we calculate it according to the average price of more than 50,000 yuan in Liang Xiang.

Including freight and other costs, it is expected to cost about 60,000 yuan to put into production.

Summary. Hello, the reasons why the charcoal plant died are as follows: 1Finished product quality. 2.Output of finished products. In the process of charcoal production, we must meet the actual raw materials and meet the quality of the finished product to do the market.

Hello, the reasons why the charcoal factory died are as follows: 1Finished product quality. 2.Hole refers to the output of the product. In the process of charcoal production, we must be realistic raw materials, and the quality of the finished product will be sufficient to make sales.

Hello, pro Some people used oak as charcoal for the cost is very low, the use of maple leaf can be used as a fuel, its combustion value is too low, simply burn the bridge can not make the main material of charcoal.

Hello, dear You are stupid or in Xuandai Wu Chuan to see the dust is that in recent years, charcoal profits have gradually risen, many charcoal factories are booming, as soon as they see this scene, they want to make money, and they can't care about anything else, and they don't think about anything else.

Hello, pro advertisement on the argument that straw cow dung, newspapers, and leaves can make charcoal ash, but in fact, it is not, the most inferior raw material of charcoal is the straw laughing and shouting sails. Charcoal and some sawdust, the wood will barely reach the hail mark.

Hello, pro-bureau bright stool It is recommended to be cautious and seriously consider preparing in advance. Compare the cost and profit of local charcoal making. It is also necessary to compare and analyze the raw materials, site, labor, electricity and other conditions before Tonglu can make money.

Profit is calculated according to cost, and if the cost is high, the profit will definitely decrease.

The business license of the industrial and commercial bureau must be indispensable, if the local pollution problem is more serious, it is good to do environmental protection. Hamburg reviews are nothing more than a façade that most people don't do, otherwise few companies can really qualify.

For specific matters, please consult: Langfang Jiuyang Carbon Industry.

Hello, I am Ruyi, a workplace mentor. The profit of opening a charcoal factory is high, and it is necessary to consider many aspects of reputation factors, such as raw materials, production costs, market demand, etc. Generally speaking, the profit of charcoal making plant is relatively high, because charcoal is a commonly used fuel, and the consumer market is still larger than that of Jianxiang.

However, it is necessary to consider the factors such as market competition and environmental protection, so it is necessary to conduct sufficient market research and evaluation before opening a charcoal plant. In addition, the production process of making charcoal also needs to pay attention to safety and environmental protection, and requires high production costs. In a word, there are many factors that need to be considered to open a charcoal making plant in order to make a reasonable decision.