How to clean the dust in the holes of the mobile phone, and how to clean the dust from the sound hol

Ways to clean dust from the crevices of your phone:

1. There are no tools around us that can use the paper towel we carry with us, roll it into a needle-like paper roll, stretch it into the crevice, and scrub it slowly.

2. If you feel that the strength of kneading into a roll with a paper towel is not hard enough, we can find some paper clips and pins commonly used in the office, and put a small amount of paper towels on the open paper clips or pins, so that it is easy to clean up and has strength.

3. Relatively formal operation method dilution alcohol + cotton ball: alcohol is volatile and has disinfection and sterilization effects. Wipe the edges with a cotton ball dipped in a little alcohol, or scrub the cracks of the phone clean.

4. We can also use a soft brush, or a toothbrush to clean the gaps, pay attention to the use of a toothbrush, the strength should not be too large, avoid scratching the screen or mobile phone film, brush out the dust, and gently blow it off.

5. Finally, we use a little paper towel to dip the cleaned mobile phone with some alcohol, scrub the screen, and the mobile phone will be as bright as new.

First, toothbrush cleaning, prepare a new toothbrush, and then brush it at the earpiece of the mobile phone, the slender toothbrush bristles can easily clean the dust inside;

Second, toothpick and alcohol cleaning, prepare toothpick cotton wool and alcohol, wrap the cotton wool around one end of the toothpick, dip a small amount of alcohol, reach into the mobile phone earpiece to wipe;

Third, the double-sided tape is cleaned, tear the double-sided tape into a ribbon, stick it on the earpiece, and tear off the double-sided tape, you can see that a lot of unnoticed dust sticks out;

Our mobile phones have been used for a long time, earpieces, headphone jacks, speakers and charger interfaces will inevitably accumulate dust, the amount of dust accumulated is related to the environment and usage habits we are in, why do some people's mobile phone earpieces, headphone jacks, speakers and charger interface positions look clean, but yours is still dirty? You can't clean it up yourself, don't worry, I'll teach you a few tricks here, and you can easily get rid of the dust in the earpiece, headphone jack, speaker and charger interface. Say goodbye to dismantling, say goodbye to taking it to the mobile phone store for cleaning, remember that when I didn't know how to clean up the dust before, I regretted it when I stupidly took it to the mobile phone store to disassemble and clean.

After a long time, the speaker and microphone on the top of the iPhone are filled with all kinds of dust, because it is a filter, so it is a headache to clean up, some people may use a toothpick wrapped in a paper towel to wipe it, but if you accidentally use too much force, the phone will be damaged.

1.First you need to prepare double-sided tape, tear it into a band, a small brush.

2.Attach the double-sided tape to the microphone or speaker and smooth it out.

3.Peel the double-sided tape off and you'll see a lot of dust stuck to you that you didn't notice before.

Do not poke the dust in the corner with a sharp object, as this will not only make the dust unable to be adjusted, but also get stuck in the filter of the speaker and earpiece. In the end, if you want to clean up, you can only disassemble the machine.

The charger interface and headphone jack are much simpler, you only need to use a small ball of cotton or a paper towel, dip it in a little alcohol, put it in the hole and twist it a few times, and you will see that the paper towel is black and not slippery.

If you want to clean up the dust in the hole of your phone, you can try cutting the tape into thin strips and stuffing it into the earphones to stick the dust out, or roll the toilet paper into a long strip and stuff it into the earphone hole and turn it around twice, but this is also risky, in case the toilet paper is folded in the earphone hole, it is not good.

You can also use a toothpick wrapped with double-sided tape to clean, the principle is to use the stickiness of the double-sided tape on the toothpick to stick out the gray layer, and the same force should be light. Some friends will use a cotton swab dipped in alcohol to wipe it, and the alcohol will not leave traces after volatilization, so pay attention to deal with it when the machine is turned off. And don't wipe it with water, as it may cause water to get into your phone.

As for the dust at the speaker of the mobile phone, do not use hard things to destroy the dust cloth. The easiest way is to use a discarded toothbrush and brush it directly. The dust inside the speaker is not very stubborn, the dust in general will not affect the normal use, if it is really very stubborn dust, it is recommended to use a little alcohol, and then use a brush to remove it, it is not recommended to disassemble the machine.

Do you have slimes in your house? If you have to take a small piece from the slime, just a little bit, and then quickly poke back and forth in the hole of the phone, you have to make sure that your slime does not stick, so that it does not stick to the hole of your phone. It's risky, but it's clean.

As mobile phones become a necessity in daily work and life, many users feel that they are very aware of the design of mobile phones. I don't know if it's clear to the user, there are some inconspicuous holes at the bottom of all phones. So what do these small holes in the bottom of the phone do?

How should I clean the holes on the bottom of these phones?

What does the hole in the bottom of the phone do?

The function of the small hole is to reduce noise, as the name suggests, it is to reduce noise and play the effect of isolating noise. In the process of calling, the other party's voice will be heard in the mobile phone, but when we are talking, due to the noisy next to it, the other party may not be able to hear what we are talking about, and these two noise-canceling microphones will collect the noise that is far away, and the system will automatically judge it as noise, and this sound will be isolated.

Daily maintenance and cleaning method of the small hole at the bottom of the mobile phone:

If the hole in the bottom of the phone is blocked by dust, then the transmitted sound will be noisy and the quality of the call cannot be guaranteed. The easiest way to clean up is to use a toothbrush to clean up, you can choose a toothbrush with fine and soft bristles, gently sweep all the small holes on the phone a few times, and then blow with a small hair dryer to clean the dust around the holes.

In addition, you can also choose to clean it with a toothpick + double-sided tape. First, remove the tips of both ends of the toothpick and wrap one end of the tape cut into small strips. Second, use the wrapped end to stick out the dust in the noise reduction microphone.

1. Prepare a roll of double-sided tape and a toothpick, and tear off a piece of double-sided tape to wrap the toothpick. Don't wrap it too thickly, because the headphone jack is not very large, and if it is too thick, it will probably cause some corners of the headphone jack to not be cleaned properly.

2. Insert a toothpick wrapped in double-sided tape into the earphone hole, without too much force. Pay attention to the small corners in the headphone jack and try to achieve the best cleaning effect.

3. After the cleaning is completed, you can see that there is a lot of dust stuck to the toothpick, and the cleaning effect is very ideal.

4. After the cleaning is completed, you can also use the dust plug to reduce the dust entering the headphone jack of the mobile phone.

When you say that the mobile phone is in dust, it should be the earpiece or charging port. You can use a toothpick to stick double-sided tape into the charging port and stick the ash out. Then wash it with a cotton swab dipped in alcohol.

If there is dust in the hole of the phone, clean it with a toothpick.

Cut off a small piece of double-sided tape and glue it on.

Stick a toothpick in the hole of your phone for a week.

Stick the tape in and out of the dust.

Here's how to clean up the dust from the holes of your phone:

Tools Material: double-sided tape, a toothpick.

1. First of all, prepare a roll of double-sided tape and a toothpick, tear off a piece of double-sided tape to wrap the toothpick, do not wrap it too thickly, as shown in the figure below.

2. Then put a toothpick wrapped in double-sided tape into the earphone hole, don't push too hard. Pay attention to the small corners in the headphone jack and try to achieve the best cleaning effect.

3. Finally, the cleaning is completed, as shown in the figure below, and the toothpick can be taken out to see that there is a lot of dust stuck to it, so that the cleaning is completed.

How to prevent dust from mobile phone headphones

If you don't use headphones often, you can use headphone dust plugs, and the effect is still good. It is mainly to prevent dust from entering the headphone jack, and it plays a decorative role, beautiful and generous, some products are cute, and they are deeply liked by girls who are sleepy and sleepy. Mobile phone dust plugs are divided into earphone jack dust plugs and data interface dust plugs.

Now there are more dust plugs for power interfaces (mostly iPhones), and dust plugs for data interfaces are relatively rare.

If you feel that there is a need to disturb, you can put the mobile phone into the storage bag, and it can also prevent the key in the bag and other hard objects from scratching the phone.