How to clean the dust of the mobile phone charging port, how to clean the dust of the mobile phone c

Updated on technology 2024-07-28
8 answers
  1. Anonymous users2024-02-13

    Method 1: Use cotton swabs skillfully.

    Prepare some cotton swabs and some alcohol, if the cotton on the cotton swab is too thick, you can tear it properly, so that it is easy to clean the dust from the charging port. Use a cotton swab dipped in some alcohol to wipe the charging port, and after a while, the cotton swab surface will be stained with dust, and the phone can be charged normally.

    Method 1: Use a toothbrush.

    The tiny bristles of the toothbrush can clean the dust of the charging port, we take a toothbrush to wipe it at the charging port, and the dust can be cleaned after a while, in addition, the dust at the earpiece of the mobile phone can also be cleaned with a toothbrush.

    Precautions for mobile phone charging:

    First of all, let's talk about the first point, you will have a habit of charging while playing. It is when charging, it is also consuming power, which will cause a certain impact and loss on the mobile phone, so we can turn off the network when charging, and even shut down directly, in this way, it can not only save our charging time, but also extend the life of our mobile phone.

    I don't know when you use your mobile phone, you are used to charging when you have how much power is left, and many people don't pay attention to the precautions for charging your mobile phone, which is the right way to charge! As long as you have a charger by your side and your phone is not satisfied, you want to charge your phone.

    In fact, this is very incorrect. When we start to leave 20% of the surface of the mobile phone and begin to prompt us, it means that our mobile phone is about to be charged, and most of the current mobile phone batteries are made of lithium batteries. If we want to play with the mobile phone, play until the mobile phone is out of battery, empty and then recharge, this will cause a very large loss to the mobile phone, especially on the battery.

    The last point is also a very important point, that is, we must use our original charger when charging, the correct way to charge the mobile phone, these 3 points to pay attention to, many people ignore! That is, our original charger, if you use other chargers, or borrow someone else's charger to charge, although the same interface can be charged, but if it does not match, it will cause damage to the phone. More severely, it can cause**.

    Charging a mobile phone, it seems very simple, but there is also a certain doorway in it, as long as we master the correct charging method, we can also extend the service life of our mobile phone, but also save charging time,

  2. Anonymous users2024-02-12

    Teach you how to clean your phone's charging hole.

  3. Anonymous users2024-02-11

    How to clean up the dust from your phone's charging port.

  4. Anonymous users2024-02-10

    Take Huawei Mate30 mobile phone, EMUI10 system as an example:

    1. Toothbrush cleaning method:

    First prepare a toothbrush, and then wash back and forth at the charging port of the mobile phone, the slim toothbrush bristles can easily clean the dust inside, and the bristles can be cleaned up by cleaning it several times.

    2. Toothpick and alcohol cleaning method:

    First prepare a toothpick and an alcohol swab, then remove the tip of the toothpick to prevent scratching the phone, then wrap the cotton wool around one end of the toothpick, then dip a small amount of alcohol, reach it into the phone charging port and wipe it back and forth. Alcohol has the effect of sterilization and disinfection, and it is very volatile, so you don't have to worry about the problem that the mobile phone will get water, but you should pay attention to the amount of use to prevent corrosion of the internal parts of the mobile phone charging port, resulting in abnormal charging function.

    3. Double-sided tape method:

    First of all, find a piece of double-sided tape, transparent glue and other particularly sticky objects, tear it into a ribbon and stick it to the charging port of the mobile phone, smooth it carefully, and then tear off the tape with dust, you can see that a lot of dust has not been noticed before.

    The above situation and methods are applicable to most mobile phone models such as Huawei and Apple. )

  5. Anonymous users2024-02-09

    1.If there is dust at the charging port of the mobile phone, you can use a hair dryer to blow the dust off. Note: Use hot air to blow in cold weather, but the temperature should not be too high, otherwise the interface will be scalded. On hot days, you can use cold air to blow.

    2.Use double-sided tape to remove the dust from the outside of the phone's charging port.

    3.Use a discarded soft-bristled toothbrush to gently brush the dust back and forth at the interface.

    4.In addition to this, you can also use chewing gum to stick the dust off the charging port.

  6. Anonymous users2024-02-08

    It is unavoidable that there is dust in the charging port, and it does not affect the normal charging.

    If there is too much dust accumulation and the charging connector is not in good contact, just pick it with a toothpick, it is not a big problem.

  7. Anonymous users2024-02-07

    How to clean up the dust from your phone's charging port.

  8. Anonymous users2024-02-06

    Why are you in a hurry if your phone can't be charged? Teach you the trick to easily solve the recovery charge, save money and be more effective.

Related questions
6 answers2024-07-28

1. Toothbrush cleaning method:

First prepare a toothbrush, and then wash back and forth at the charging port of the mobile phone, the slim toothbrush bristles can easily clean the dust inside, and the bristles can be cleaned up by cleaning it several times. >>>More

25 answers2024-07-28

Method 1: You can choose a mobile phone case with audio port and charging port protection, which can be found on a certain treasure, which can well protect the charging hole from dust. >>>More

10 answers2024-07-28

Tools and ingredients: regular tape, toothpicks (or thin sticks that can reach into the earpiece), scissors. >>>More

15 answers2024-07-28

Tools and ingredients: regular tape, toothpicks (or thin sticks that can reach into the earpiece), scissors. >>>More

7 answers2024-07-28

First, remove the heatsink from the motherboard, pay attention to the direction of rotation of the screws (pins), and if necessary, remove the motherboard from the inside of the chassis first. Some radiators will have a backplate, pay attention to the installation of the backplate. >>>More