What kind of diode is 2cz82c

Updated on technology 2024-08-15
5 answers
  1. Anonymous users2024-02-16

    The 2CZ82C is a silicon rectifier diode.

    Peak voltage range 10V

    Sweep voltage regulation 100%.

    Scanning polarity positive (+).

    Power dissipation resistor 250

    The x-axis selects the degree of vc.

    Select 10mA degrees for the y-axis.

  2. Anonymous users2024-02-15

    The meaning of the 2CZ83 model Erwuyan pole tube is:

    1. Cong Chengyun 2 indicates diode;

    2. c denotes n-type silicon material.

    Diode; 3. z is denoted as a rectifier diode.

    4. The seepage beam number represents the working current and other parameters.

  3. Anonymous users2024-02-14

    2" for diode;

    "C" stands for n-type, silicon material.

    z" indicates a rectifier diode.

    The fourth part "Numbers represent the differences in parameters such as operating current, inrush current, and working frequency code attitude rate." 83 is the working current, the surge current is 6A, and the forward voltage drop is 1V;

    The last part (unknown)" (a, b, c...).Indicates the directional breakdown voltage.

    A-25V, B-50V, C-100V, D-200V...m-1000v。

  4. Anonymous users2024-02-13

    2cz21c.

    2 diodes.

    C n type silicon material.

    Z—rectifier tube.

    21- indicates the serial number of the device.

    c Part V indicates the specification number of the diode in letters.

    Naming conventions for domestic diodes.

    Part I: 2 represents the diode.

    Part II: Representation of the material of the device in Chinese pinyin letters.

    A n-type germanium materials b p-type germanium materials c n-type silicon materials d p-type silicon materials Part III: Indicate the type of device with Chinese pinyin letters.

    p Ordinary tube v Microwave tube w Regulator tube C Parametric tube z Rectifier tube l Rectifier stack s Tunnel tube n Damping tube u Optoelectronic device k Switch tube.

    Part 4: Numerical representation of the device serial number.

    Part 5: Distinguishing codes for specifications in Chinese pinyin.

    The model nomenclature of the national standard domestic diode is divided into five parts, and the meaning of each part is shown in the following table.

    The first part is indicated by the number "2", and the main is called the diode.

    The second part uses letters to indicate the material and polarity of the diode.

    The third part uses letters to indicate the categories of diodes.

    The fourth part is numbered by numbers.

    The fifth part indicates the specification number of the diode in letters. In order, there are A, B, C, D, E, F, and the meaning of the letters is that the other parameters of this series of diodes are the same, only the peak value of the highest reverse working voltage is different, and the higher the withstand voltage after the letter number.

  5. Anonymous users2024-02-12

    The 2CZ11C parameters are: withstand voltage: 300 current: 1A forward voltage drop is: 1V.

    The parameters of CZ55E are: withstand voltage: 300V current: 1A forward voltage drop: 1V.

    The above two parameters are basically the same according to the data.

Related questions
19 answers2024-08-15

SMD diode is a diode that is soldered through the SMT process, mainly used in consumer or ordinary electronic products, classification: 1According to the semiconductor data used, it can be divided into germanium diodes (GE tubes) and silicon diodes (Si tubes). >>>More

12 answers2024-08-15

Because diodes can only be energized in one direction, and there is literally a "two poles" that can be extended to "two extremes", it is used to refer to people who are black and white, forcibly simplifying complex problems, and will only attack with a preset position, and will not look at the problem dialectically. Is this called scolding? It's just a statement of facts. >>>More

15 answers2024-08-15

In fact, the diode also has a very special performance, that is, it can be used as a temperature detection device very well, stable, reliable, convenient and very cheap. Many people may not know that it can be used in this way. >>>More

13 answers2024-08-15

A diode, a device with two electrodes that allows current to flow in a single direction, is used in many electronic components to apply its rectification function. Varactor diodes (VAFIC diodes) are used as electronic tunable capacitors. >>>More

12 answers2024-08-15

From commonly usedRectifier diodesA7 look at the parameters: >>>More