How to add a knife block to the multi functional woodworking engraving machine?

The engraving machine has a variety of data input modes that can be easily adapted to meet your needs. It is compatible with a variety of engraving software, and can also be compatible with JD software in engraving machine ENG format. The arc optimization command of the engraving machine can automatically eliminate the velocity chatter according to the characteristics of the workpiece.

The traditional CNC control system often has the following problems: the curve speed is slower than the straight line speed, the curve accuracy is worse than the straight line, the machine jitter is very strong and the speed is slow, and the accuracy is poor. The application of this control system effectively solves this problem, which not only improves the processing efficiency (the processing time can be shortened by 30%-300%), but also eliminates the speed chatter mark and improves the processing quality.

The engraving machine adopts widened high-precision cylindrical linear guide rail, which has good stability and high precision. The processing stroke is more than 160 mm, which is higher than other equipment, especially suitable for making blister molds, contracting semi-finished products and ...

1. First of all, I want to know the fit between the tool and the chuck, whether the knife method is correct and the quality of the tool itself are all factors that affect the runout. In this regard, I should pay attention to the cleanliness of the chuck and nut, and there should be no dust.

2. The strength of the knife should be correct, too large and too small are not good, and the length of the tool extension should be small. The speed of the spindle motor should also be paid attention to when necessary, and the requirements for the spindle speed are not very high.

3. The engraving machine is because the radial cutting force aggravates the radial runout, and reducing the radial cutting force is an important principle for reducing the radial runout. Use sharp tools: the overall cutting force of sharp tools is small when machining, 4. The radial cutting force of the tool is small, so that the radial runout of the tool can be reduced; The rake surface of the cutter should be smooth:

In this way, the friction of the chips on the tool can be reduced during machining.

5. Rough machining should still be used in the use of milling, finishing in the use of conventional milling, note that this is only used in finishing, otherwise the service life of the tool is difficult to be guaranteed.

6. When using conventional milling, the direction of the cutting force always pulls the tool towards the workpiece, so that the tool is more stable during processing; Then it is to use a strong woodworking engraving machine cutter, and the strength of the knife can be increased by increasing the diameter of the tool holder.

There is no knife block, and the knife is also very simple, mainly depending on what operating system you are using, I said engraving machine, if it is convenient, you can add me, I will help you look at it.

There are many ways to pair the knife. The cutter block is also not the most accurate.

Summary. Engraving is a kind of drilling and milling combined processing from the processing principle, and a variety of data input modes of the engraving machine are easy to use according to needs. There are two types of computer engraving machines: laser engraving and mechanical engraving, both of which are divided into high power and low power.

Because the range of applications of engraving machines is very wide, it is necessary to know the most suitable application range for various engraving machines. The low-power ones are only suitable for two-color plates, architectural models, small signs, three-dimensional handicrafts, etc., while the carved jade, metal, etc. require more than 1500W. A high-power engraving machine can do something with a low-power engraving machine.

It is most suitable for large-scale cutting, relief, and carving.

Hello, about what knife is used in the composite board engraving machine, you can check the content, oh dear.

July 9, 2019 Compound Milling Width Coma 7For metal engraving processing, it is recommended to use a single-lift grip blade and a double-edged straight groove flat-bottomed sharp knife. Straight flute flat bottom sharp knife 8For precision 3D engraving processing, it is recommended to use a 3D engraving knife, which has high concentricity and sharp cutting edge.

Engraving is a kind of drilling and milling combined processing from the processing principle, and a variety of data input modes of the engraving machine are easy to use according to needs. There are two types of computer engraving machines: laser engraving and mechanical engraving, both of which are known to have high power and low power. Because the range of applications of engraving machines is very wide, it is necessary to understand the most suitable application range of various engraving dust locust talking machines for Pian.

The low-power ones are only suitable for two-color plates, architectural models, small signs, three-dimensional handicrafts, etc., while the carved jade, metal, etc. require more than 1500W. A high-power engraving machine can do something with a low-power engraving machine. It is most suitable for large-scale cutting, relief, and carving.

You can go to our ** to see, our** has a more detailed introduction.

Temg electromechanical technicians will tell you how to use the cutters of the woodworking engraving machine.

1.The size of the jacket should be appropriate, there is a section, the jacket that is not round enough, has wear, and has a taper in the inner hole must not be selected, otherwise it will cause the handle to vibrate, and the carving can not achieve the ideal effect.

2.The tool holder should be in gentle contact with the jacket, the tool holder should be firmly inserted into the jacket and fastened, if the jacket is used for too long and the inner hole is deformed, the jacket must be replaced immediately.

3.The tool should be checked frequently, if the use is dull, please replace it immediately, if you continue to use not only the carving effect is not good, but also the situation of broken knife.

4. When the woodworking engraving machine is used, the thickness of the processing can not exceed the thickness that the cutting edge can cut, and the knife will still be broken.

5.For the cutting of different materials, the cutting speed should be used reasonably.

6.Bodies, clothing, and hair should not be placed near objects at work.

7.The recommended cutting speed should be balanced, and the speed should be as consistent as possible in order to achieve better results.

8.Knives should be cleaned with a special detergent.

9.Buttering prevents the knives from rusting.

10.The tool cannot be sharpened or changed by itself.

The engraving machine cuts the two-color plate words, and it cannot be replaced by double-sided tape, otherwise the strokes will tremble, destroying the effect of the text strokes. It's just that you chose the wrong double-sided tape to fix the two-color plate when cutting and processing the two-color plate. Be sure to remember:

If you choose the "two-color plate special adhesive tape" to fix, there will be no "double-sided glue on the back after gluing, very dirty, but also post-processing" phenomenon.

The characteristics of the adhesive tape for the two-color plate: superior adhesive performance, strong adhesive force and strong adhesion. At the same time, the adhesive tape for the two-color plate is also easy to tear, and after tearing, the surface of the plate is as clean as new without any pollution.

There is a special engraved pressure plate, and the pressure plate can be fixed when pressed. If it is a very thin material, pad it a little to protect both the knife and the countertop.

Sanqiang CNC is a high-tech enterprise integrating R&D, production and sales, specializing in R&D and production of engraving machines, cutting machines, mechanical engraving machines, 1224 advertising engraving machines, laser cutting machines, laser engraving machines, plasma engraving machines, advertising engraving machines, stone engraving machines, etc.

Engraving machine applicable industry:

Woodworking industry: mainly suitable for plate plane, three-dimensional corrugated board processing, screen, process sash window processing, cabinet door, solid wood door, craft wood door, paint-free door carving, cutting, hollowing, punching; Carving and processing of mahogany classical furniture and antique furniture, wood carving technology, gift wooden boxes, mahogany jewelry boxes and other products, inkstone art carving and processing, decorative products carving, jewelry fine carving, etc.

Advertising industry: suitable for processing various patterns of colorful molds such as: signs, signs, architectural models, badges, badges, badges, nameplates, display boards, monograms, door plates, signs, craft decoration, furniture decoration, etc.

Other industries: architectural models, wood molds, aviation wood molds, propellers, automotive foam molds. Three-dimensional curved surfaces of violin, erhu and other musical instruments, appearance cutting, as well as surface pattern carving, calligraphy plaque, photo frame carving.

It can also be used for portraits, landscapes, calligraphy lettering, seals and other artistic plane carving, Yin and Yang outlines, and relief production.