What are the disadvantages of the ratio of capacitive screen to resistive screen? Which is better fo

Resistive screens are cheaper than capacitive screens. To put it simply, the capacitive screen is thermally inductive, and the finger operation can only be used, and the recognition rate is also a little higher.

The resistive screen is the kind that used to touch the machine.

It's useless to copy those majors, so I'll tell you something amateurish.

The resistive screen is a soft screen and is operated by pressing. Capacitive screens are hard screens that operate by contact. The advantages and disadvantages are obvious.

The resistive screen is relatively laborious, and the capacitive screen is labor-saving, but it is much less labor-saving than traditional buttons.

The brightness of the resistive screen is relatively poor, and it may be difficult to see clearly under the sun, and the capacitive screen is basically none. This is speaking of the same power consumption. You can adjust the brightness.

The capacitive screen must be operated with a conductor such as a finger belly, and the resistive screen can be operated with anything and a glove in winter.

The accuracy of a good capacitive screen is not bad, but misoperation is still very common, after all, the area of the finger belly is still relatively large compared to the screen, and the habit is good. The poor accuracy of the capacitive screen is really miserable. The accuracy of the resistive screen is high, and there is generally a nail operation, and any other pen can be used.

Capacitive screens all support multi-point operation, resistive screens do not.

The mobile phone is still a capacitive screen, and it is more expensive. Mobile phone resistive screens are rare. The resistive screen poke is healthier, like Nintendo's DS is the resistive screen, and the experience is also very good.

Because the question has been asked for a long time, the development of touch screen technology has changed, and now it is the version projection capacitive screen right that is used more, and the G + G structure capacitive screen, in addition to the touch screen used in mobile phones, has been widely used in various equipment in the life industry,。。 Industrial capacitive screen expert, the number of 183, the middle four digits are 2005, and the last four digits are 9375. All touch.

The light transmittance and clarity of the capacitive touch screen are better than the four-wire resistive screen, but it cannot be compared with the five-wire resistive screen, and it can currently support multi-touch.

The capacitive touch adopts surface tempered glass and ITO glass, which has a relatively long service life.

Just touch your fingers, no press required, no calibration required.

After years of application and development, the technology of resistive screen has been quite mature, low and cost-saving.

It is easy to use and can be used with any contact.

It does not drift, works in an environment completely isolated from the outside world, and is not afraid of dust, water vapor and oil stains, and needs to be calibrated once before installation.

The resistive screen is a soft screen, and the capacitive screen is a hard screen.

The resistance screen is controlled by fingers or other items, and the accuracy is not as good as the capacitive screen, and the capacitive screen is inducted by the fingers, and the accuracy of other items cannot be operated better than the resistance screen.

To put it simply, that is.

Usually the most important thing is sensitivity and operation.

The capacitive screen is more sensitive, and you can operate it under a little touch, and the resistive screen should be more powerful when operating.

In addition, the capacitive screen can generally only be operated with fingers (there are also special pens), while the resistive screen can be operated with fingers or other hard objects.

Representative model: capacitive screen: iPhone

Resistive screen: Nokia 5800

Capacitive screen is good Capacitive screen is thermally inductive, touch is much more accurate in all aspects, resistive screen can only be touched with force, and the accuracy is very poor

The advantage of resistive screen is that everything can touch the display capacitive screen can generally only be touched by hand.

The resistive screen is relatively soft, and there is a feeling of pressing it when touching the screen, and the capacitive screen is relatively hard, which is the same as the outer screen of the mobile phone case.

The capacitive screen is better, strong and scratch-resistant, and has good definition.

Of course, it's a capacitive screen, most mobile phones are capacitive screens, and Apple is sensitive, anti-mistaken touch.

Capacitive screen, more sensitive.

The capacitive screen is characterized by a hard screen, sensitive to touch, no need to press the screen hard, and supports multi-touch, but can only be touched with fingers.

The resistance screen is characterized by a soft screen, which has a slight depression when pressed, and needs to be touched a little harder, and any stylus can be used, but it does not support multi-touch.

The capacitive screen can achieve multi-touch, and the capacitive screen is good, but it is more expensive

The capacitive screen can be touched with gloves, and the capacitance identification site is changed according to the slight deformation, and the resistance screen must be touched by hand, which is identified according to the temperature local resistance change.

The resistive screen is said to be less sensitive after a long time.

Advantages: small, big brand, quality assurance. Cons:

A lot!! Small screen, low resolution, low camera, no flash, low frequency, low ROM and RAM! It's a resistive screen...

I regret buying it, if you want to start with it, you should consider other open sections and rocks.