What is the material of z45T 10 gate valve DN300

Z45T-10 refers to the gray cast iron valve with a nominal pressure of 10 kg. DN300 means that the body diameter is 300mm. The meaning of its letters and numbers is:

z) indicates - gate valve;

4) indication - internal thread connection;

5) Representation-dark rod wedge rigid single ram;

t) Indication - The body is made of copper or copper alloy;

10) Indication - Nominal pressure 1 megapascal.

Here are some of the well-known brands recognized in the valve industry, which are widely recognized and have a high reputation. While rankings may vary depending on time and market conditions, the following brands are generally considered to be among the top brands in the valve industry:

The following influential first-line brands of water system valves and industrial valves can be used as a reference, but for reference only: Suzhou Neway Valve, Shanghai Guanlong Valve, Shanghai Qizhong Valve, Sanhua, Su Yan, Shentong, Su Valve, Nanfang, Jiang.

First, the word Yao. The above manufacturers are only estimates and references, and the specific situation may vary or fluctuate at any time due to changes in a series of factors such as changes in the market, the size of the competition pattern, and the stability of product quality. As an indispensable key device in industrial production and civil facilities, the quality and reputation of the valve brand directly affect the satisfaction and trust of users.

These brands are known in the valve industry for their innovative technology, high-quality products and reliability. It is important to note that the market and industry are evolving rapidly, and different rankings may vary depending on time and region. For the most up-to-date ranking information, it is recommended to refer to industry reports, professional organizations or market research data for more detailed and accurate information.

First of all, DN100 means that the diameter (inner diameter) of the valve is 100mm.

Z45T-10 is a model of gate valve, which means dark rod cast iron flanged gate valve. Split each character into explanations:

Z is the gate valve, 4 is the flange connection, 5 is the dark rod structure, T is the copper seal, and 10 is the nominal pressure of 10 kg.

100mm caliber. Gate valve, flanged, wedge, copper alloy seal, body grey cast iron, 10 kg pressure. Provided by Bode Valve Technology Shanghai ****.

It is a gate valve made of low-pressure dark rod cast steel.

Replacing the traditional cast iron valve Kjeldahl door, compact structure, reasonable design, good valve rigidity, smooth channel, large flow coefficient and small flow resistance coefficient, simple structure and easy maintenance. The models are Z45H-10C, Z45H-16C, Z45H-25C. Its sealing surface is made of stainless steel and cemented carbide for a long service life.

The use of flexible graphite filler, reliable sealing, light and flexible operation.

Z45T-10 is one of the sizes of Z45H-16C dark rod gate valve, the other is Z45-16(C).

z45t-10qDuctile ironThe direction of movement of the gate plate of the dark rod flange gate valve is perpendicular to the direction of the fluid, and the gate valve can only be fully opened and closed, and the cover cannot be adjusted and throttled. The ram has two sealing surfaces, and the two sealing surfaces of the more commonly used mode gate valve form a wedge-shaped and wedge-shaped angle valve.

Z45T-10Q ductile iron dark rod flange gate valve has low flow resistance. The medium channel inside the valve body is straight, and the medium flows in a straight line, and the flow resistance is small. It is more labor-saving when opening and closing. Yes with shut-off valves.

Compared with Hongmin, because whether it is open or closed, the direction of movement of the ram is perpendicular to the direction of the medium flow.

Gate valve precautions.

When operating, the human body should not be facing the top of the valve stem to prevent the valve stem from being sprayed out under pressure and injuring people.

The switch operation should be smooth and even, and it is strictly forbidden to use impact force.

In general, it can be operated by hand, and the afterburner lever is avoided to operate the new valve.

The strength of the handwheel (handle) is designed with reference to the torque value required for operation, so the hand-clearing wheel (handle) should not be used as an operating pedal and an arbitrary increase or socket extension lever, or a wrench.

To increase the torque excessively, it is not possible to use ropes and other acts on the handwheel (handle), and then use a crane or pulley to operate or lift the valve.

Gate valve Z45T-10Q, ductile iron dark rod gate valve.

Z stands for gate valve, 4 stands for flange connection, 5 stands for dark rod structure, T stands for copper seal, 10 stands for nominal pressure 10 kg, Q stands for valve body material, ductile iron.

The complete representation is: ductile iron, brass sealed dark only buried rod method refers to the noisy orchid gate valve, pressure and rolling force of 10 kg.

Summary. Z41T-16 gate valve. Can DN50 reach 150C

Hello dear, Z41T-16C Gate Valve: Z Gate Valve, 4 Flange Connection, 1 Open Rod Wedge Single Gate, Seat Material is Copper Alloy, 16kgf cm 2, Body Material Cast Steel, Handwheel Drive.

DN15016 gate valve means that the valve diameter is 150 mm, 16 is on behalf of the maximum working pressure is the valve body area per square centimeter can not exceed 16 kg, I think in front of 16 should add the letter P, because the letter P is on behalf of the pressure, of course, on the surface of the valve body there is added P, there are also not added, in short, with the number should understand that the maximum working pressure can not exceed its value.

Z41T-16 gate valve. Can DN50 reach 150C

Z41T-16 gate valve. DN50 can reach 150C, Z41T-16C gate valve: Z gate valve, 4 flange connections, 1 open rod wedge single gate, valve seat material is copper alloy, 16kgf cm 2, valve body material cast steel, handwheel drive.

DN15016 gate valve means that the valve diameter is 150 mm, 16 is on behalf of the maximum working pressure is the valve body area per square centimeter can not exceed 16 kg, I think in front of 16 should add the letter P, because the letter P represents the pressure, of course, on the surface of the valve body of the valve there is a cluster of ignition plus P, there are also not added, in short, the chain has a number should understand that the maximum working pressure can not exceed its value. Hope it helps.

Whether the temperature can reach 150 degrees.

Z41T-16 gate valve can reach 120 degrees in temperature, you are good, see what kind of material, the general cast iron gate valve is 0-120 degrees, I hope it can help you. If my solution is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!