How is it most convenient to clean an electric fan after a long period of use?

Even though many people now have air conditioners at home, but everyone still uses electric fans, and long-term use of electric fans need to be cleaned in time.

1. Homemade detergent

1. Add one cover of laundry detergent, two caps of vinegar and three caps of alcohol to 50ml of water. You can also add a little fabric softener, which can smooth the leaves, remove static electricity, and prevent dust.

2. Then pour into the bottle, close the lid and shake well. For example, the gap between the fan is black, and if it is not cleaned, it will affect the appearance. If the gap is stained with oil and it is difficult to wipe it clean, you can use a fine brush to dip it in detergent and then brush it gently.

2. Use a sponge skillfully

Use a sponge to clean, you don't even need to screw a screw, and you can still wash it clean and dust-free!

1. Find a clean sponge, cross it horizontally and vertically and cut it into small squares, and be careful not to cut off the sponge.

2. Wet the sponge, scrub the mesh cover strip one by one, brush once to clean a large piece at the same time, and clean the fan grille in less than two minutes!

3. Use white vinegar skillfully

1. The ceiling fan has stubborn dirt, which is difficult to clean with water, but white vinegar can easily solve this problem.

2. Mix white vinegar and water in a ratio of 1:10, moisten the long-handled mop, and reach to the fan blades to quickly clean the stains on the fan blades.

Fourth, daily cleaning steps

1. Unplug the power supply first, which is very important, 2. The middle of the electric fan grille is fixed with a plastic ring, and the screw on the plastic ring can be removed by unscrewing the grille.

3. It is also very simple to remove the blade, as long as the plastic cover in the middle is unscrewed, and then the blade can be removed.

4. Unscrew this plastic nut as well, so that the grille inside can also be taken down, take it to the bottom of the faucet and scrub it, and then wipe it dry with a dry rag after brushing it clean.

5. Now reinstall it again, first install the innermost grille, and pay attention to the two vertical holes to align with the plastic point in the middle.

6. We screw the plastic nut back again, and then install the blade, pay attention to the groove when installing, this groove should be just stuck on this small iron bar.

7. Finally, screw on the plastic cover and put the outer grille back on.

That's all for today, have you all learned?

It is most convenient to disassemble the electric fan for cleaning, the electric fan can be disassembled, and the electric fan can help people dissipate heat in the summer.

Remove the fan for cleaning, it will be very clean, and some small brushes will be used. It is best to wash it with dish soap, it is very clean.

After use, the upper fan blades can be removed. You can choose dish soap or baking soda and wipe with a rag.

You need to choose to use some detergent, spray it on the leaves through a watering can, and then rinse it with clean water and dry it before using it.

1. Cut off the power supply of the fan and remove the protective net of the electric fan. There are cards around the protective net, after loosening the card, unscrew the screws, and the protective net can be removed.

2. Then remove the fan blades, unscrew the round plastic cover in the middle of the front of the fan blade, and you will see a small section of the shaft exposed. Different models of electric fans have slightly different designs, and some need to remove the small screws on the side of the fan blades.

3. Add water and detergent to the cleaning basin, carefully scrub the protective net and fan blades, the detergent can be used laundry detergent or detergent and other commonly used household products, but do not use oil-based detergents such as gasoline, because oil-based detergents will cause corrosion to paint and plastics, damaging the appearance and even life of the electric fan. Then scrub the small parts and the body with a rag dipped in detergent, and after cleaning Lao Xiaotan, wipe all the parts with a clean dry rag, and then put it in a ventilated place to dry for a while.

4. Note: If you clean the electric fan by yourself, Shitong must cut off the power supply in advance, and you can scrub it with a wet rag, but you must wipe the water on it dry after cleaning.

1. Remove the screws first, generally use plum screws, so you need to use plum screwdrivers. Tear down the back first, then the front. Generally, there are few fixing screws at the back, about 3. After dismantling, the screws should be placed uniformly in a small box to prevent loss.

2. After dismantling the back one, dismantle the front one. If you can't see the screws on the bright side, don't force them to dismantle, they are generally taken down directly, or there are hidden buckles, or rotations, and there are hidden screws. However, no matter how it is, the household type is generally not difficult to dismantle, and you can find it if you calm down and observe it a little.

3. After dismantling, start cleaning from the fan blades. Because the place where the fan blade is generally located is also the location of the motor, that is, the core part of the fan, it cannot be drenched with water. But the fan blades and the surrounding area are also the dirtiest places.

So first wipe off the dirtiest and thickest layer of dust with a paper towel.

4. Then wipe the fan blades and surroundings with a wrung out wet towel at least 3 times or more until clean. If some stubborn stains appear, you can sprinkle some vinegar on a wrung out wet towel and wipe it again.

5. After wiping the fan blades and periphery, rinse the dismantled shell with water. After rinsing off the large pieces of black dust, use a small brush or towel to wipe and brush off the stains attached to the shell. It is better to use a brush for the plastic shell and a towel for the hardware shell.

After washing, wipe off the surface with a wringed-out damp towel. Place in a cool place to dry.

6. Finally, follow the way of dismantling and then put everything on. Also start from the back first, then the front. Once installed, check it and try it with power.

Methods and steps for cleaning electric fans.

Before the cleaning work begins, cut off the power supply of the electric fan, and if you have just used the electric fan before cleaning, let the electric fan cool down for a while to prevent hot hands.

1. First prepare a screwdriver, unscrew the outermost screws that cover the shell, but not all of them, just loosen them a little, and take out the outermost fan sleeve after slowly loosening it.

2. Then gently unscrew the blue circle in the center of the fan in a clockwise direction, and take out the fan blades inside.

3. The white sleeve behind the fan can be screwed out clockwise like twisting the fan.

4. Clean the removed fan leaves with soap and brushes.

5. After washing, put it in a cool and dry place to dry, and after drying, the cleaned fan blades and grille can be installed according to the original position.

The main purpose of cleaning the electric fan is to clean the machine head, first disassemble the machine head, remove the fan blade and grille for cleaning, and then install the machine according to the original position.

Tools required: brushes, rags, screwdrivers.

Materials required: paper towels, water, detergent.

Steps to clean the electric fan:

Place the fan you want to clean flat on the table;

Use a screwdriver to twist off the fixing screws on the fan grille, as shown in the figure below

Remove the front grille after twisting the screws of the grille;

Twist the large fixing nut of the fan blade in a clockwise direction to remove it;

Pull the fan blade outward to remove the fan blade;

Next, twist the big nut that fixes the back grille by hand and remove the back grille;

Take the removed fan blades and grille together to the sink and wash them with water so that their surface is soaked with water;

Apply the detergent to the fan blades and grille and wash with a brush;

Rinse the cleaned fan blades and grille with clean water to remove foam and dirt on the surface;

Finally, wipe the cleaned fan blades and grille and install the machine in the original position.

Precautions: The electric fan must be powered off before cleaning, and wiped or dried after cleaning, and cannot be brought to the water engine. The body of the fan is generally not dirty, and even if it is dirty, it can be wiped directly with a damp and soft cloth.

Hello, it can be cleaned with an ultrasonic cleaner.

The use of ultrasonic cleaning machine can completely remove the stubborn stains on the electric fan grille, just disassemble and throw the accessories into the ultrasonic cleaning tank, add water and cleaning agent, you can let the machine complete the cleaning automatically, this cleaning is all-round, do not worry about the cylindrical grille will have stains remaining. The energy waves generated by the blasted blisters act directly on the stains on the surface of the grille, and through this uninterrupted cycle, they are destroyed, decomposed until they fall off, and finally complete the cleaning.

In the hot summer, the temperature rises, and the fan, which has rested all winter, is "working" again. Many friends will notice that after the previous summer's work and autumn and winter storage, the protective net and fan blades of the electric fan have accumulated thick dust, if the electric fan is used directly without cleaning, these dust will be dispersed into the air with the rotation of the fan blades, causing air pollution. In addition, there is a risk of germs in dust and dirt on electric fans.

Using an electric fan that is not cleaned will undoubtedly pose a great threat to our own health and that of our families, so don't be lazy before using an electric fan every summer, and clean it. So how do you clean it? Many friends have reported that cleaning the fan is a chore, disassembling and assembling troublesome, and it cannot be thoroughly cleaned due to poor waterproofness.

If your fan is waterproof, users have a lot less trouble at this point. Generally speaking, the fan box is a fastening button, and the floor is also designed without screws, so it can be easily installed and disassembled without a screwdriver, so let's see how to clean it! 1. Preparation:

Before all the work begins, cut off the power supply, if you have just used the electric fan before cleaning, then it is best to let it cool down to prevent hot hands; 2. Disassembly: first disassemble the protective net, the protective net is generally fixed by buckles or screws, the fan fixed by the buckle only needs to open the buckle, and the fan fixed by the screws needs to use a screwdriver to unscrew the screws, and then take off the protective net and put it in the cleaning basin (note: the removed buckles and screws and other small parts are best placed in a small box to avoid loss); Then disassemble the fan blade, generally rotate the fan blade along the clockwise direction to remove, and put the fan blade into the cleaning basin; 3. Cleaning:

Add water and detergent to the cleaning basin, carefully scrub the protective net and fan blades, the detergent can choose laundry detergent or detergent and other commonly used household products, but do not use oil-based stain removers such as gasoline, because oil-based stain removers will cause corrosion to paint and plastics, damage the appearance and even life of electric fans; Then scrub the small parts and body with a rag dipped in detergent; After washing, dry all parts with a clean, dry cloth and let it dry in a ventilated place for a while. 4. Installation: Finally, install all the components back in reverse order when dismantling, and the cleaning of the electric fan will be completed.

Okay, follow the steps and the fan will be cleaned. Let's see if it's clean? So the fan can be used, if it's hot, hurry up and blow it!

**To:

1.Unplug the plug, cut off the power supply, and remove the protective net of the fan. There are cards around the protective net, loosen the card and unscrew the screws to remove the protective net.

2.The next thing is to remove the fan blades, unscrew the round plastic cover in the center, hold the fan blades and hit the shaft with a hammer, and the fan blades will be removed. Different fans have different fan blade designs, and some small screws on the side of the fan blades need to be removed.

3.After disassembly, it is time to carry out the scrubbing work. You can mix scrubbing detergent, dish soap, and laundry detergent with water, put the protective net in the mixture for about 10 minutes, and then scrub it repeatedly with a brush, rinse it with clean water after wiping, and then dry it with a rag, and put it on the balcony to dry.

4.Most electric fan blades are plastic, so don't wipe them with oil. You can wipe off the stain with a sponge and dry it with a dry cloth.

Disassemble it, wash the shield with water, and cool dry. The motor bearings are cleaned with gasoline, and then the oil and sewing oil are dripped into the oil absorbent sponge around the bearings, and it is good to install.

Is the electric fan dirty and difficult to clean? Teach you the cleaning tricks, simple and convenient, the electric fan is clean immediately.

1. Ensure that the cleaning steps are carried out in the state of power-off to ensure the safety of the cleaning process, and secondly, it is recommended to prepare cleaning tools, as well as disassemble tools such as fan screws.

2. First of all, remove the shell of the electric fan, this shell is generally a mesh protective cover to protect the fan blades, because it is fixed, so it is best to use a screwdriver to remove the screws, and then remove the protective net.

3. Then disassemble the fan blades, generally the dust on the fan blades is the most, you can use tools to remove the fan blades, because the fan blades are the same as the windmill, using a shaft to fix together, so the fixed screws can be unscrewed, generally the current fans are different, so different fan disassembly is also different steps, if the fan bearing is not too dirty, you can also use a wet towel to wipe the dust on the fan blades clean without disassembly.

4. If the fan blade is disassembled, put the fan blade into clean water and rinse with clean water, if the dirt is serious, you can add a small amount of dish soap to clean, and finally rinse with clean water, and then dry it. The same is true for fan covers.

5. Other parts of the electric fan can also be wiped clean with wet towels, including the shell, buttons and other places, pay attention to the wires of the electric fan and try not to wipe them with wet towels, so as not to penetrate into the circuit and damage the electric fan, and the bearing of the electric fan should also add an appropriate amount of lubricating oil to ensure the smooth rotation of the fan blades.

6. Finally, install the dried fan blades and install the protective cover, after the installation is completed, under the condition that the electric fan is dry, it can be powered on for trial operation.