How can the wintering bees move 100 meters without returning bees?

Spring is about to begin, and many friends are preparing to divide the bees. In general, spring multiplication can develop about three to six times. Therefore, proximity relocation is avoidable.

Because when dividing bees, you need a position. However, if you move in close proximity normally, there will be beebacks. Unless, you move the bees far away for a while, and then move back so that there will be no bees.

But moving over long distances is cumbersome and time-consuming. Some friends have asked me, can the close relocation be done without bees? Yes, now Xiaohu will share with you the problem of close relocation to prevent bee return.

Proximity relocation is an opportunity, that is, there is a suitable weather, especially in the south. Because we have to wait until the cold weather to operate, the success rate is large. If we want to move in close proximity, wait for a very cold weather and the bees will not come out.

We'll be able to take a little stuff and put the beehive.

The door is blocked, and the thing that blocks the door of the beehive must be something that the bee can bite open. After we've blocked the beehive door for a day or two, we can move the hive where we want to go.

When the weather warms up in a few days, the bees will bite open the door of the hive when they want to come out. This will serve as a reminder that it will come out of the hive after some tossing and turning, and it will rediscover its current location. And after a period of time, the previous lines have been forgotten, so there will be no bee return.

In the past, Xiaohu often fed this problem and worried, and every time he moved, there would be a problem of fighting caused by bees, and he suffered heavy losses. Later, after Xiaohu's continuous learning and attempts, he finally found that this method is possible. Xiao Hu didn't dare to say that there was not a single return bee, but the number of return bees was very small, only a few or a dozen back bees.

Like the bees that we usually catch not very far from the apiary, we can also use this method to prevent the problem of bee return.

It is best not to move, and the long wintering period should be moved to 2 kilometers away for half a year and then moved back to a new location.

Hello, generally the first day, one day apart can be. Because when the bee comes out of the nest and flies for a test flight, the hive base will be closed. If the positioning is successful, the bee will remember its nest door and return to the nest smoothly.

If the bee in the transition comes to an unknown place, it will also reposition the hive position, and the previously positioned hive position will be superimposed and eliminated, and only the newly positioned hive position will be remembered. Therefore, the bees do not have to worry when they are transitioning, they will remember the location of the original hive and do not recognize the location of the new hive. Therefore, even if the beekeeper runs hundreds of miles or thousands of miles with the bee colony, he will not lose all the bees.

As long as the hive moves more than 6 kilometers away, as long as it follows the hive, the bee can set the position when it comes out of the hive, and the previous hive position will be forgotten. If the distance is too close, at a distance of 6 km, the bee will not locate and will remember its original position, and the phenomenon of returning bees will occur. If the distance is far away and there is no return bee, the colony will not look for the location from which it came from.

Summary. Hello It takes 12 hours for bees to move out and move out without returning bees The nesting behavior of bees will be affected by a variety of factors, including season, temperature, air pressure, light, etc. If the hive is moved to a farther place, it is generally recommended to do so at night or early in the morning, as most of the bees are resting in the nest and the light is darker, and the bees' eyesight is less acute than during the day, making it easier for them to accept the new environment.

When relocating back, it's a good idea to leave some markers in the original location, such as some familiar scents or markings, to help the bees relocate their nests.

Hello It takes 12 hours for bees to move out and move out without returning bees The nesting behavior of bees will be affected by a variety of factors, including season, temperature, air pressure, light, etc. If the hive is moved to a farther place, it is generally recommended to move it at night or early in the morning, because most of the bees are resting in the nest at this time, and the light is dark, and the bees' eyesight is not as sharp as during the day, and they will be more sensitive and receptive to the new environment. When relocating back, it's a good idea to leave some markers in the original location, such as some familiar scents or markings, to help the bees relocate their nests.

How long does it take for the bees to move out and move back?

How long does it take to move out and move back after changing locations?

If the bees have already built a hive and started collecting honey, moving out for a while and then moving back to the letter, there is a risk that some of the bees will return to the old nest instead of the new nest. This is because bees have a memory, and they can remember the location and smell of their nests. Generally speaking, bees stay in a new nest for at least 3-4 weeks before they gradually adapt to the new nest and build new memories to avoid returning bees.

If you want to move back to your old nest, it is advisable to wait until the bees have adapted to the new nest and established new memories, and try to keep the old nest and the new nest similar, such as placing some of the same nest material or covering the new nest with the original nest material. However, moving is stressful to the bees and may affect the health and nectar production of the bees, so you should be cautious when moving and try to avoid multiple relocations.

<> the newly recovered wild bees can stabilize after about 3 days. Before collecting wild bees, you can check whether there is a queen bee, if there is a queen bee, then the management will be much simpler, directly transfer a spleen and then separate the nest door with a king piece, and then put the bees into the hive and cover it, and check whether the colony has an upper spleen in the evening. Then, after the bees have spleen, they can be rewarded with sugar water and fed for 3 consecutive days, so that the queen bee can lay eggs and the worker bees can make the spleen stable.

If there is no queen bee, it can be directly merged into other bee colonies that have queen bees.

1. It takes a few days for the freshly recovered bees to stabilize

1. It takes about 3 days for the freshly recovered bees to stabilize. Before collecting wild bees, you can check if there is a queen bee, and if there is a queen bee, it will be much easier to manage. You can directly transfer a spleen and then separate the nest door with a king piece, and then put the bees into the beehive and cover it, and then check whether there is an upper spleen in the bee colony in the evening.

2. After the bee has a spleen, you can reward it with sugar water and feed it for about 3 days, so that the queen bee can lay eggs and the worker bees can make the spleen stable. During the day, you must not disturb the bee colony, you must make the bee colony feel safe, and wait until the bee colony begins to pollinate, which means that it has stabilized, and you can remove the king sheet at this time.

3. If there is no queen bee, it can be directly merged into other bee colonies with queen bees. You can also transfer the egg worm spleen and then intervene in the queen bee or intervene in the mature king platform, and you can get on the spleen in the later stage, and after the spleen of the bee colony, you can raise it according to the normal breeding method.

2. How do wild bees take home their homes?

1. Make a beehive with a wooden barrel or plastic bucket first, the beehive must be well sealed, and only a movable nest door can be left.

2. Then boil it with sugar and honey and apply it to the inner wall of the beehive, put the beehive near the wild bee nest and open the nest door, and the wild bees will enter the beehive after a few days.

3. When you see a wild honeycomb in the wild, you must take protective measures, then put on gloves, open the bee colony to find the queen bee, and then catch the queen bee into the homemade queen bee cage and put it in the beehive. Then put the hive in a place where there are wild bees, and after a few days you can go and collect wild bees.

4. In the early stage of breeding, an anti-escape piece must be installed, which can prevent the queen bee from leading the bee colony to escape. If possible, you can also choose a new nest spleen, which can reduce the workload of bees to make spleen.

The time for which a bee does not return to the bee usually depends on its flight distance and other factors. When bees need to find flowers or other resources, they dance in their hives to indicate to their companions the direction and distance of the resources. This dance language is known as the "Bee Dance Language".

Generally, when a bee flies to a new resource, it returns to the hive and performs a dance to indicate the location and quality of this resource to other bees. Bees will continue to work until the resource is depleted or a better resource emerges.

While bees usually return to their hives while working, there are times when they can get lost or get lost in search of resources. In this case, the bees may be forced to stay outside overnight or for a few days, only to wait until they find a suitable landmark or hive before returning to the hive. As a result, a bee may not return for more than a day or more.

In addition, bees are affected by various external environmental factors, such as weather, morale, and species interactions. If bees are searching for resources and encounter bad weather, obstruction from other insects, or low morale of bees, it may take longer for them to return to the hive.

In general, the time for a bee not to return is not fixed, but depends on a number of false factors. However, in general, bees are very effective in finding and indicating resources, they will try their best to find the best resources and let other bees share these resources as well. <>

1. Transfer the old queen bee to the new beehive, and then transfer half of the spleen, honeyscap, and worker bees in the original bee colony to the new beehive. 2. After moving the bees, move the new beehive to another place, about 5 meters away from the original beehive, and install an anti-escape piece in the hive to prevent the queen bee from escaping. 3. After moving the bees, it is necessary to regularly observe the grain storage of the bee colony in order to replenish it in time.

1. The best way to move bees in close proximity

1. Bee moving method.

1) Prepare a new beehive in advance, and then transfer the old queen bee to the new beehive, and then transfer half of the spleen, half of the honeycomb, and half of the worker bees in the original bee colony to the new beehive.

2) After moving the bees, move the new beehive to another place, about 5 meters away from the original beehive, and then install an anti-escape piece in the hive to avoid the queen bee escaping.

2. Precautions.

1) After moving bees, the management of bee colonies should be strengthened, such as regularly observing the grain storage of bee colonies, and replenishing them in time if necessary.

2) Regularly observe the number of bee colonies, the old queen bee generally has a strong ability to lay eggs, if the other bee colony is weak, you can properly supplement some capped spleen in its hive.

Second, will it have an impact on moving bees for 20 meters?

1. Moving bees 20 meters will have a certain impact, bees have a deep memory of the location of the beehive, if the distance is short, the bees can find the location of the hive door through the information sent by the worker bees, if the bee moving distance is farther, the bees may not be able to return to the position of the hive, and can only clump in the original place.

2. If the number of bee colonies is small, it can be moved within a range of 10-20 meters, and it is advisable to migrate gradually, and when moving forward and backward, the distance of each movement should not exceed 1 meter; When moving left or right, the distance of each move should not exceed meters.

3. The time to move the bee colony is suitable after the bees return to the nest at night, and every time they move, they should wait for the field bees to adapt to the nest position before moving the next time.

4. If you breed bees in the north, you can use the wintering period of the bee colony to migrate in close proximity, and you can start to move after the bee colony forms a stable wintering group. Do not disperse the bee colony during relocation to prevent the bees from freezing to death, and when the bees have passed the overwintering period, they will forget the original hive location, and will re-identify the bee when they come out of the nest in the following spring.