How to connect the PE water supply pipe and PVC pipe?

What is the difference between HDPE water supply pipe and PE water supply pipe? Tengyuan will answer for you. Strive for development by quality!

Rely on integrity to create a win-win situation! Tengyuan PE pipe quality first, **discount! Tengyuan Plastic Industry - one of the very few 1600mm ultra-large diameter PE pipe manufacturers in China, special pressure manufacturing license, special inspection institute supervision, gas certificate, coal safety certificate, wading certificate and other quality certification, 100 million yuan of capital injection to witness the strength!

24-hour free nationwide**400-0312-298PE pipe** is based on the construction of the pipe. Pressure. Caliber and other different factors are combined to calculate the strict data!

Accurate and specific**, please call the national 24-hour free**400-0312-298 Tengyuan - specializing in the production and sales of PE water supply pipes, PE gas pipes and PE flame retardant, antistatic mining pipes, PE ground source heat pump pipes, PE siphon drainage pipes, PE water supply pipe fittings, PE gas pipe fittings, PE resistance...

Dear and hello, PE and PVC pipes can be connected in the following three ways: 1Hot melt joining method:

Using the thermoplasticity of PE and PVC pipes, the end face of the pipe is first hot melted into a uniform spherical surface, and then the two pipe ends are connected and gently rotated, and the connection can be realized after the pipe cools and solidifies. 2.Mounting Accessories:

Use a dedicated PE-PVC transition fitting for connection. This Li Mingchong fitting is installed between the PE pipe end and the PVC pipe end, which can not only meet the connection, but also solve the interface problem between the two Chang Chang. 3.

Clamping connection method: put the PE pipe on the outside of the PVC pipe, and then use the pipe clamp or nut to clamp the two to achieve the purpose of connection. This connection method is relatively simple, but the application range is limited, and it is mainly used in low-voltage projects.

Summary. Dear, we are glad to answer for you: how to connect PVC pipe and PE pipe?

Answer: Due to the different materials of PE pipe and PVC pipe, hot melt or glue cannot be used. PE pipes and PVC pipes can be connected with threads or flanges. Threaded connection:

One end of the PE pipe is hot-melted with a PE inner wire directly (or the outer wire is direct), and then one end of the PVC pipe is glued with glue to bond an outer wire directly (or the inner wire directly), and then the inner and outer wires are directly screwed together; Flange connection: hot melt the PE flange with the PE pipe, and the PVC flange is bonded with the PVC pipe, and then tighten the 2 pieces of flange with screws. Either way, care must be taken not to forget to put a gasket or wrap a seal tape.

Dear, we are glad to answer for you: how to connect PVC pipe and PE pipe? Answer: Due to the different materials of PE pipe and PVC pipe, hot melt or glue cannot be used.

PE pipes and PVC pipes can be connected with threads or flanges. Threaded connection: hot melt one end of the PE pipe with a PE inner wire directly (or the outer wire directly), and then glue one end of the PVC pipe to bond an outer wire directly (or the inner wire directly), and then screw the inner and outer wires directly together; Flange connection:

The PE flange is hot-melted with the PE pipe, and the PVC flange is bonded with the PVC pipe, and then the 2 pieces of flange are tightened with screws. Either way, care must be taken not to forget to put a gasket or wrap a seal tape.

Kiss! Hello, happy to answer your <>

How to connect the PE water supply pipe with water is as follows: PE pipe with water connection generally cannot be hot-melt welded. Only a union fitting is needed to be plugged into the water pipe connection.

Another reason why polyethylene can be widely used is because polyvinyl chloride is increasingly under pressure from environmental protection. First of all, the hygienic performance of PVC itself: as we all know, the production of PVC pipes under regular production and strict control can ensure the hygienic performance and are allowed to be used in the field of drinking water.

However, there are still people who are wary of the possibility of problems in places where the control is not strict: for example, the vinyl chloride monomer in the PVC resin exceeds the standard, and the toxic additives are misused in the formulation of PVC pipes for water supply. PVC pipes and fittings for drainage, which are not guaranteed to be non-toxic, are misused for water supply pipes and fittings.

The second is the problem of PVC pipes: PVC and polyethylene are thermoplastics, which can be used theoretically, but the proof of various countries that the proportion of old plastic products can be regenerated is limited, and the main treatment method is incineration. Hope mine can help you <>

Do you have any other questions?

1. Electric fusion connection: electric fusion socket connection, electric fusion saddle connection;

2. Hot-melt connection: hot-melt socket connection, hot-melt saddle connection, hot-melt butt connection;

3. Mechanical connection: thread connection, flange connection, steel-plastic conversion connection.

Question**What about connected accessories?

**Accessories can be purchased to connect.

Answer: PVC is polyvinyl chloride, PE is polyethylene, two different materials of pipe connection need pipe fittings, you can bond an outer wire through at the end of polyvinyl chloride (PVC), weld an inner wire through the top of polyethylene (PE), tighten the through wire connection and then tighten it, (remember to tighten the wire first and then weld the pipe below) Install a slipknot behind the inner wire through to facilitate future maintenance and replacement!

The relevant accessories connecting the PE pipe and the PVC pipe can be bought on the ** above, oh question, please ask the top of the PE pipe is welded with the inner wire of PVC.

Sewage pipes are generally piped:

PVC drainage pipes are generally used for drainage in buildings, double-wall corrugated pipes are used for large-diameter drainage pipes buried outdoors, and special drainage pipes are required for industrial sewage.

Double-wall corrugated pipes are used for municipal road paths, and reinforced concrete pipes or reinforced pipes are used for large pipes.

Commonly used are stainless steel, PVC and polypropylene PP-R. Generally, it is hot-melt welding, and another pipe connection method is hot-melt socket, but that is only used for drainage pipes, because the water supply pipe is under pressure, so it cannot be used and is easy to expand.

The most commonly used materials for sewage pipelines - plastic pipes and pipe fittings, rigid polyvinyl chloride pipes (UPVC), UPVC pipes are the most widely used plastic pipes at home and abroad. UPVC pipes have high impact resistance and chemical resistance.

UPVC pipe: In fact, it is a kind of plastic pipe, and the interface is generally glued together, and the frost resistance and heat resistance of UPVC pipe are not good. Therefore, cold and hot water pipes are rarely used, and PVC pipes are suitable for wire pipes and sewage pipes.

**Related to pipe size, it is the cheapest of the plastic pipes. It is a sewer material commonly used in residential buildings at present.

If you want to use better, use PE pipes, cold water, hot water can be used, and of course sewers can also be used. Lifespan 50 years.

1. For PE pipes and PVC pipes (plastic pipes) of the same caliber, the outer diameter is the same, so the stainless steel pipe hoop is directly used, and the stainless steel pipe connector can be quickly connected.

2. PE and PVC are of the same caliber, both of which are small-caliber and are connected by wire.

One end of PE and the inner filament of PE are hot-melted, one end of PVC and the outer filament of PVC are glued together, and the inner filament and the outer filament can be connected.

3. PE and PVC pipes have different outer diameters, so in this case, use the adapter (reducer) to become a plastic pipe of the same caliber.

Fourth, for large-diameter PE pipes and PVC pipes, flange connections are generally used.

The PE pipe is connected with the PE conversion flange, the PVC pipe is connected with the PVC conversion flange, and the flange can be connected with the flange.

5. For large-diameter PE pipes and PVC pipes of different diameters, use reducer flanges to connect.

For your reference

If you want to connect the VC pipes that have been approved by Xinyiguan, you need a professional plumber to help you operate.

Hello, glad to answer your question, PVC is polyvinyl chloride, PE is polyethylene, pipe fittings are needed for pipe connections of two different materials, you can bond an outer wire through at the end of polyvinyl chloride (PVC), weld an inner wire through at the top of polyethylene (PE), tighten the through wire connection and then tighten it, (remember to tighten the wire first and then weld the pipe below) Install a slipknot behind the inner wire through to facilitate future maintenance and replacement. Hope it helps.

The connection of PE pipe and PP pipe can be divided into the following according to the interface form and heating method

1. Electric fusion connection: electric fusion socket connection, electric fusion saddle connection;

2. Hot-melt connection: hot-melt socket connection, hot-melt saddle connection, hot-melt butt connection 3, mechanical connection: thread connection, flange connection, steel-plastic conversion connection.

Hello, friend, in general, this one has a separate connector, and you can connect it by buying a separate connector.

The connection of PE pipe and PP pipe can be divided into the following according to the interface form and heating method

1. Electric fusion connection: electric fusion socket connection, electric fusion saddle connection;

2. Hot-melt connection: hot-melt socket connection, hot-melt saddle connection, hot-melt butt connection;

3. Mechanical connection: thread connection, flange connection, steel-plastic conversion connection.