Do Mercedes Benz have to go to a 4S shop to change brake pads?

As long as it is a regular and larger auto repair shop, it can be replaced.

Brake pads. Replace it once between 30,000 and 50,000 kilometers, and when the vehicle is used for more than 30,000 kilometers, it is necessary to regularly observe the brake pads to check the actual thickness of the brake pads to ensure that they are replaced immediately after the use reaches the limit. Brake pads are one of the important components of the vehicle's braking system, the braking system.

The pressure is transmitted to the brake pads, brake pads and brake discs through the piston cylinder.

friction between them.

The braking force generated slows down or stops the vehicle.

Brake pads need to be changed in the following situations:

1. Look at the thickness: Usually, the thickness of a new pair of brake pads is about the same, and when the thickness of the brake pads is observed to be less than the naked eye, it is necessary to prepare for replacement. There is also a protruding sign on both sides of each brake pad, the thickness of this sign is about two or three millimeters, which is also the limit of the thinnest brake disc replacement, if the thickness of the brake pad is already parallel to this logo, it must be replaced.

2. Listen to the sound: If the brake is accompanied by the sizzling sound of "iron rubbing iron", the brake pads must be replaced immediately. Because the limit markings on both sides of the brake pads have directly rubbed against the brake disc, it proves that the brake pads have exceeded the limit.

3. Strength: When stepping on the brakes, if you feel very hard, there is always a soft feeling, often need to step on the brakes deeper to achieve the previous braking effect, when taking emergency braking, you will obviously feel that the pedal position is low, then it may be that the brake pads have basically lost friction, and they must be replaced at this time, otherwise it will cause serious accidents.

It's better to be cautious when it comes to security. Of course, reliable auto repair shops and brake pad specialty stores are not absolutely impossible, you can only say that you can weigh it yourself. I especially mind going to 4s...

Hello, not necessarily outside the repair shop can be replaced.

Hello, BMW brake pads can be replaced in general 4S shops, there is no effect. Automobile brake pad replacement cycle: 1. Replace the front brake pad every 30,000 to 50,000 kilometers or so; 2. Replace the rear brake pads every 60,000 to 100,000 kilometers or so.

3.However, this is not a fixed value, and it needs to be judged according to different driving environments and personal driving habits. 4.

Automobile brake pads, also known as automobile brake pads, refer to the friction materials fixed on the brake drum or brake disc that rotates with the wheels, and the friction lining and friction lining bear external pressure to produce friction to achieve the purpose of vehicle deceleration.

Everyone has some questions about cars in their daily lives. Let's introduce to you: Should you change the brake pads in the 4S shop? Interested friends can learn about this problem, I hope it will help you.

When the car's age and mileage reach a certain level, the brake pads will wear out and need to be replaced. From the point of view of safety and quality, it will be more secure to replace the brake pads in the 4S shop.

First of all, replace at the 4S shop:

The advantage of replacing in 4s is that if there is any quality problem during the warranty period, the manufacturer can claim the warranty. The downside is that the cost is too high, and some tough brands may have to wait a long time.

Second, replace it outside:

Brake pads replaced by outside repair shops are of varying quality and can lead to safety issues. However, the cost of replacing accessories outside is generally lower than that of 4S stores, and there is no need to wait for a long time.

Notes on brake pads:

1.Cars should be inspected every 10,000 kilometers.

2.In the long downhill section, it is best not to step on the brakes continuously for a long time, so as not to cause the brake system to fail due to the high temperature of the brake pads, and use the engine brake more.

3.Avoid blisters.

Summary. Hello, replacing the front brake pads of Mercedes-Benz requires turning on the maintenance mode. In Mercedes-Benz models, the vehicle is equipped with an electronic control unit (ECU) to ensure safety and reliability, which monitors and controls various functions of the vehicle, including the braking system.

Hello, to replace the front brake pads of Mercedes-Benz, you need to close the spring Zen to turn on the maintenance mode. In Mercedes-Benz models, in order to ensure safety and reliability, the vehicle is equipped with an electronic control unit (ECU), which monitors and controls the vehicle's various car dust functions, including the braking system.

Excuse me, but please go into more detail?

When replacing the brake pads, the ECU needs to be reset so that the ECU can recognize the new brake pads and adjust them accordingly. And this reset process needs to be done by turning on the repair mode. Service mode allows the ECU to enter a special state for diagnostics and repairs.

In maintenance mode, the ECU will suspend the monitoring and control of other functions of the vehicle, so as to avoid damage caused by mistaken operation. Therefore, when replacing the front brake pads of Mercedes-Benz, be sure to turn on the service mode to ensure the safety and reliability of the braking system.