My computer doesn t move when it boots up to where it s welcome What s going on

The computer boots up to the welcome interface and does not move, how to solve it.

1.Immediately after booting, press F8 to immobilize to the advanced option that appears in the let go, and select "The correct configuration of the latest Sakura" to fix it. 2.

Unplug the power cord of the computer (if it is a laptop, deduct the laptop battery), turn off the power for a few minutes, and then turn it back on. 3.If the first two methods don't work, then it may be that the system files are missing, and reinstalling the system is the easiest way.

1.Click "Start Settings Control Panel Power Options Advanced Power Management" and check "Enable Advanced Power Management Support" if your machine supports advanced power management features;

2.Click "Start", and run "regedit", then find PowerDownAfterShutdown in hkey local machine software microsoft windowsnt currentversion winlogon and set the value to 1;

3.The reboot will be successful.

Note: If your machine doesn't support advanced power management, unfortunately you'll have to manually cut off the power when the system is turned off and says "It's safe to shut down now".

Another: Wonderful way to solve win98 me can not shut down.

Both Win 98 and Win Me have such a problem: when the system is used for a period of time, when the system is shut down, it will stay on the screen of "the system can now be shut down normally", and the system can only be shut down by manually pressing the power button of the case.

Many newspapers and magazines have provided solutions to this problem, which can be summarized as follows: install Microsoft's shutdown patch, check if the advanced power option is turned on, and check whether the shutdown sound file is corrupted. However, the author's many experiments have proved that when this happens, these methods may not be effective.

The author's original solution was to restore the system with ghost, and then figured out the following method, which is simple and practical, and is now organized into a document.

1.Create a new text file and rename the file to ". The next step is to replace the system-generated file with this 0-byte "file".

2.Press "Start Run" in turn, enter "sfc" in the "Open" dialog box to run "System File Checker", click the "Extract a file from the installation floppy" option, press the "Browse" button, select the newly created "file" just now, press the "Start" button, then the "File Extraction" dialog box will appear, enter the directory where the file is located in "Restore From", such as "C:", or press "Browse" on the right to select; In the "Save File To" section, enter "System Drive Letter Windows" directly (you can also press the "Browse" button on the right to select); Once you have filled in both fields, press the OK button and start replacing the newly created File with the System Itself. During this process, there will be a prompt of "whether to back up the original file", just press the "skip" button. Finally, when the dialog box asking you to restart the machine pops up, press "Yes", and the computer can be shut down normally after restarting.

If the fault is not eliminated after following the above methods, please first rule out the shutdown sound effect file corruption and other factors. If it still can't be solved, then please press the "F8" key when booting up, select "Safe Mode" in the boot menu to boot, and then restart the system again.

1. Restart the computer: In the current state or press the host restart button to restart the computer, or press and hold the power button first to force shutdown and then reboot, if there is no longer an error prompt and can enter the system operation normally, it means that the last abnormal is only an occasional program or system running error, it does not matter.

2. Fix the error: If you can't enter the system normally frequently, press F8 immediately after booting to see if you can enter the safe mode or configure the correct mode for the last time, if so, the system will automatically repair the registry after entering, and recall what operations were done when the first few abnormal phenomena occurred, and according to the suspicion that a certain application software (or driver) caused the problem, uninstall it, and then exit normally, and then restart it should be able to enter the normal mode. If you have security software installed, you can use 360 Security Guard plus 360 Antivirus or Kingsoft Antivirus and other similar security software in safe mode to clean up your computer, optimize and accelerate, and check and kill Trojans and viruses.

If there is a hardware problem, the blue screen or the screen is not displayed, the more likely reason is that there is a problem with the system, it is recommended to start with a U disk, check whether the hard disk has a problem after entering the PE, and reinstall the system.

It's not a hardware problem, it may be that the system files are broken, try to restore the system in advanced security mode, and if it doesn't work, you can only reinstall the system.

Press Ctrl+Alt+Del to see if the entrance to Task Manager appears.

Reinstall the system, install the software, and then seal it with freezing point restoration, and it won't break.

From the system to do the system before the first check whether the hard disk is damaged If the hard disk has bad sectors, it is also stuck in the welcome interface My notebook was this problem before

This is a problem with the system, no way, you can only reinstall the system, or you don't touch the computer these days, and you can turn on the computer after a few days when the system eases up, and I have often encountered this situation before.

This phenomenon is mostly due to corrupted system files. Less hardware damage. The only way to do this is to restore the system or reinstall it. There is no other good way. I hope it will be helpful to you, please click the [Choose as satisfactory answer] button below my answer.

This kind of problem is mostly caused by viruses caused by system file corruption, I also have such an experience, general antivirus software is definitely not good, it is recommended to format the disk and reinstall the system.

Try to enter the F8 into safe mode when booting up, if not, reinstall the system.

Reboot the F8 for the last correct configuration.

Loading, be patient! Or restart and press F8 to enter safe mode, and delete everything in the startup item.

Reinstall the system! Don't do anything else, it's obviously a system problem, and it only takes a few minutes to reinstall the system! No more problems! With a USB flash drive or CD-ROM disc, PE installation is very fast!