The carpentry sliding table saw is good, how much is a carpentry sliding table saw

Updated on Financial 2024-08-01
4 answers
  1. Anonymous users2024-02-15

    Imported: Leitz, AKE. Meaning:

    Sharp and invincible. Japanese: Kanebo, Kojiro, Kobayashi.

    Israel: Malaysia. Taiwan Department:

    Hirohiro, Flying Eagle. Domestic: Nanhai Yongtai, Chengdu Holcim, Hangzhou Heyuan, Shenzhen Jinfengli, etc.

    Diamond cutters: Henan Yellow River whirlwind... Woodworking knives are many brands in subdivided industries.

    The current plate is too different, mainly according to the quality of your plate and the requirements for quality.

  2. Anonymous users2024-02-14

    The ** of a woodworking sliding table saw ranges from 3,000 yuan to 15,000 yuan.

    The main part of the Qingqing table saw includes a bed, a workbench, a longitudinal cross-section guide plate, a main saw, a line saw, a transmission and other components. The structure and working principle are similar to those of ordinary circular saws, and can be used as ordinary circular saws alone.

    The main structural feature of the sliding table saw is the use of two saw blades, the main saw blade and the scribing saw blade. When the cutting process is carried out, the scribing saw is sawed in advance, and the groove with a depth of 1 2mm and a width of 0 1 0 2mm thicker than the main saw blade is sawed out on the bottom surface of the processed plate, so as to ensure that the edge of the saw edge will not be torn when the main saw blade is cut, so as to obtain good sawing quality.

    The scribe blade has a small diameter, usually around 120mm, and is driven by a separate motor. The speed of the saw blade is generally above 9000r min, and the cutting speed is generally 56 60m s. The striping blade is required to be aligned in the same vertical plane as the main blade.

    The diameter of the main saw blade is &8943;Generally 300 400mm, driven by the main motor through a V-belt.

    According to the diameter of the main saw blade and the different types of processed plates, the main saw blade can use the tower wheel to change the speed, the tower wheel speed change structure is simple, belongs to the constant power output, and is more in line with the actual needs of wood processing.

    The power of the main motor is generally 4 9kw. In order to make the speed regulation simple, the special V-belt is used, and a single belt can meet the required power transmission. The speed of the main saw blade is generally 3000 6000r min, and the distance between the main saw blade and the marking saw blade is generally about 100mm.

  3. Anonymous users2024-02-13

    Dear, I'm happy to answer for you: Gantry saw or sliding table saw which is good to answer: dear, gantry saw is good, no need to push manually, labor-saving, and save a body of sawing.

    1.The size of the sliding table of the precision sliding table saw is divided into: ; 3m;。

    The main structural feature of the precision panel saw is the use of two saw blades, the main saw blade and the scribed saw blade. When the cutting process is carried out, the line saw of the hole is sawed in advance, and the depth of the bottom surface of the processed plate is 1 2mmThe width is thicker than the main saw blade

    The price of the 2mm groove 2, the general 45° precision sail sliding table saw band electric saw blade lifter is very good in the price range of 1-178, and it is a double saw blade. The size of the error is up to you. Generally, if the track on the front table of the push car does not shake, there will not be much error.

  4. Anonymous users2024-02-12

    The carpentry table saw blade went down, how to get up.

    Dear, glad your question! The woodworking sliding table saw blade went down, and the method is as follows: check the saw blade, the manuscript cover beam, and the key transport saw blade has no collapse and no excessive wear.

    2.Determine the position of the main saw and the scoring sawThe main saw is in a line with the carved saw; ②.

    The main saw blade exceeds the workpiece by 20mm-25mm; ③.The carving saw exceeds the workpiece by 3mm-5mm; Stuffy fluidThe main saw blade rotates clockwise, and the carving saw rotates counterclockwise.

    3.Try sawing a waste board without defects such as edge collapse, blackening, and obvious steps. Sliding table saw operation blanking board contact forklift staff to place the required processing substrate on the left side of the sliding table saw, neatly placed.

    When placing the board, the cushion under the board should be flat, and the plate should not be bent and deformed.

Related questions
4 answers2024-08-01

The landlord seems to be very layman, and the review will be given to you in detail! >>>More

11 answers2024-08-01

The one who said it was good to help you. I really don't know what's good. Anyway, I'm at a loss there, it's a second-level **, just a sales relationship, after-sales everything is in the brand 4s, there is no 4s should have 24-hour rescue, etc., buy an electric car must go to the brand 4s, like BYD, JAC, BAIC New Energy, Dongfeng, Chery, Zotye have electric vehicles, test drive and then compare the quality is easy to choose.

4 answers2024-08-01

Everyone's requirements are different, the accessories selected are also different, at least the CPU selection is very different, the average person can use Intel, stable, more power-saving, like to play games, especially 3D games, generally choose AMD, now choose 4800+ dual-core boxed cost-effective, the motherboard according to their own funds as much as possible to choose a good point, large factory large board type, hard disk on the top 160G7200 rpm, memory general Kingston DDR2 677 1G 1G 1 or 2, There are many types of graphics cards to choose from depending on whether to play large games, generally 7300GT is enough, otherwise it is 8600 or even higher, optical drive is generally *** or *** burning, the chassis depends on the preferences, the power supply is selected, 400W or so, the monitor is based on funds, it is recommended to 19 widescreen LCD, the mouse and keyboard are used according to the habits, the speaker is generally selected Edifier, the medium one is good CPU AMD Athlon64 X2 4400+ AM2 (65nm box) 420 Motherboard ASUS M2N-SLI 699 Memory Kingston 2GB DDR2 667 255 HDD Seagate 160G 8M(Serial Port 5 Years Box) 355 Graphics Card Colorful Yicai 8600GT-GD2 CF**Edition 512M 699 Optical Drive Taipower Goddess Health Series 18x***-ROM 159 LCD Samsung 943nw 1599 Chassis Jinhetian Hurricane II 8197 225 Power Supply Huntkey Wide King 2 Generation (Version) 328 Total amount: 4739 yuan. >>>More

13 answers2024-08-01

Own brand: Oriental Son Cross - 3,000 yuan discount for the whole system, not many cars. >>>More

4 answers2024-08-01

Waterproof, moisture-proof, fog-proof and portable.