What to do if you choke on paint, what to do if you choke on paint, what to do if you cough, thank y

Activated charcoal for rapid deodorization:

Activated charcoal is an internationally recognized drug addict, activated charcoal masks, gas masks are all used activated charcoal. This product uses the physical action of activated carbon to deodorize and detoxify; There are no chemical additives and no effect on the human body. Put two to three dishes in each room, and the indoor odor can be basically eliminated in 72 hours.

This method can be selected for medium and low pollution, and this method can also be used in combination with other chemical methods, and the comprehensive treatment effect is better (important note: there is no activated bamboo charcoal on the market, and low adsorption coal charcoal, please add it to distinguish when purchasing, don't be deceived.)

Not all activated carbon has gas adsorption capacity, only activated carbon with a large pore size slightly larger than the diameter of toxic and harmful gas molecules has strong adsorption capacity. It is especially suitable for medium and low pollution, and recommended brand-name products: happy forest activated carbon).

Salt water deodorization: fill the container with cold water, then add an appropriate amount of vinegar and put it in a ventilated room, and open the furniture door. In this way, it can not only evaporate the appropriate amount of water to protect the paint surface of the wall roof, but also absorb and eliminate the residual odor; You can also put two basins of salt water indoors, and the paint smell will disappear quickly.

If it is the smell of paint emitted by wooden furniture, you can scrub it with tea a few times, and the paint smell will be eliminated faster (it has a certain effect on formaldehyde, because formaldehyde is soluble in water and has little effect on other harmful gases, so it can be used together).

Peel to remove the smell: Buy some pineapples and put a few in each room, and put more in the larger room. Because pineapple is a crude fiber fruit, it can not only absorb the smell of paint, but also achieve the fragrance of pineapple, speed up the removal of odors, and play the best of both worlds; Placing items such as orange peel and lemon peel in the room is also a very effective way to remove the smell, but they will not work very quickly; (The impossibility of inhaling is small, in fact, it is to cover up the smell, which is more harmful to the human body).

Citric acid soaked cotton balls:

To quickly remove the residual paint smell, you can use citric acid to soak cotton balls and hang them indoors and in wooden furniture; (It has a certain effect and can be used together).

I know that pineapple can remove harmful gases in the room, and I have seen many hotels do this after renovation, you can try it. Buy a few pineapples and cut them in half, peel the skin, and let the air circulate.

Quickly get out of the painted area and drink plenty of plain water.

It is recommended that you go to the hospital to get some oxygen, it will be relieved.

Stay away for a while, and when handling the paint, it is best to wear a mask and protect your mouth and nose.

Maybe I'll have to go to the hospital for a check-up, and I'll order a maid to be safe.

Normal reaction, you can wear a mask and stay away from paint.

The general brand, the smell is very big when brushing the paint, you can use Dabao paint to try, you can move in with decoration, basically there is no smell.

When the eyes get into the paint, they will be astringent and tearful, which is a normal reaction of the human body!! Generally, it is necessary to take water and rinse it repeatedly If it is serious, it is recommended to take the hospital**!!

Remember to bring a 3m mask in the future. Eat more duck blood, pig blood, etc. to clear the lungs.

What's this, it's drizzling, it's nothing for people to deal with paint every day, you just choked on it, I promise nothing at all, none of your symptoms are caused by paint, paint is not so bad.

For the decoration of the house, the painting of the wall is a very important issue, and the color of the paint is also very important, and the difference in the color of the wall paint sometimes affects the whole room.

The style of the pattern. When painting on the wall, we all need to use paint, but the color of the paint is very monotonous, at this time we need to adjust the paint, so do you know how to adjust the paint? This requires skills and skills, so let's give you a detailed introduction to how to adjust the paint, and everyone will be clear.

Tip 1:Debugging the sample is a necessary process before we match the color, first determine how many colors of the paint sample contains the secondary color paint, calculate the color types involved in the color matching, and then adjust the secondary color and secondary color in the small container.

Tip 2:The main color paint is the color paint with a large amount in use, but the coloring amount is small, add the secondary color paint with strong color strength in the main color paint, stir evenly, compare the sample and the color plate, from light to dark, check at any time until the satisfactory effect is achieved. For example, with beige paint, you should first add an appropriate amount of white paint, slowly add yellow paint, and keep stirring until you reach the desired color.

Tip three:The color of the paint is light when it is toned, but the color will be relatively dark after drying, so the color of the wet paint should be slightly lighter than the color on the sample, and it is necessary to grasp the performance of a primary color in the color matching in advance, especially the amino paint.

and perchloroethylene coatings.

Tip 4:Add some auxiliary agents appropriately, such as varnish, curing agent, and desiccant.

In winter, you need to add desiccant to the container before starting the color matching, so as not to affect the color tone. The paint of the compound color paint needs to choose the paint with the same nature, and the solvent system should also be miscible, otherwise the quality of the paint will be affected, and there will be delamination and gelatinization in serious cases.

Tip Five:Colors generally come with different color heads, and so on according to the following color matching principle:

1. When matching green, yellow with green head and blue with yellow head are generally used;

2. When matching purple red, blue with red head and red with blue head should be used;

3. When matching orange, red with yellow head and yellow with red head should be used;

4. When blending gray, green and other compound color paints, a variety of pigments are needed, and the oiliness and density of various pigments are different, and there are often phenomena such as "floating color" and "flowering".

The above is an introduction to the skills of adjusting paint, I believe everyone knows how to make paint. In addition, it is worth noting that it is recommended that you buy the same brand of paint when you buy paint, if you use different brands of paint, it may be because of the different raw materials, resulting in chemical reactions when we mix paints, producing harmful gases and other situations, which may have a bad impact, which we must pay attention to. The introduction of this article is here, I hope to help you.

Debugging samples. Debugging the sample is a necessary process before color matching, first determine how many colors of secondary color paint are contained in the paint sample, calculate the color types involved in the color matching, and then adjust the secondary color and secondary color respectively in the small container.

2.First, add the main color (the color with a large amount and small tinting power in the color matching), and then slowly add the dark color (or color matching) with high dyeing power intermittently, and stir constantly to observe the color change at any time.

3."From light to dark", especially when adding pigments with strong tinting strength, do not overdo it.

4.The color of the paint is light when it is toned, but the color will become relatively dark after drying, so the color of the wet paint should be slightly lighter than the color on the sample, and it is necessary to grasp the floating and other properties of a primary color in the color matching in advance, especially amino coatings and perchloroethylene coatings.

5.When blending compound color coatings, it is necessary to choose coatings with the same properties to blend with each other, and the solvent system should also be miscible with each other, otherwise due to the poor miscibility of the coating, the quality will be affected, and even delamination, precipitation or gelatinization will occur, and it cannot be used.

6.Because the color often has a variety of different color heads, if it is matched with green, it is generally used yellow with green heads and blue with yellow heads; When paired with purple red, blue with a red head and red with a blue head should be used; When paired with orange, use red with a yellow head and yellow with a red head.

7.Add some auxiliaries appropriately, such as varnish, curing agent, desiccant, etc., and add desiccant to the container in winter before starting to match the color, so as not to affect the tone.

8.In the preparation of gray, green and other compound paints, due to the preparation of a variety of pigments, the density and oil absorption of pigments are different, and it is very likely that the phenomenon of "floating color" and "flowering" will occur, and a trace amount of surfactant or leveling agent and anti-floating agent can be added as appropriate to solve the problem. Silicone oil is often added for prevention and control, and various surfactants produced by foreign companies need to be distinguished from what kind of solvent system is used, and the amount added is generally in.

9.Using the slightly transparent characteristics of the color paint film, the color of the topcoat can be more vivid than the color of the original paint, which is a color produced after the superposition of the base color and the primary color according to the principle of natural light reflection and absorption, and the coating engineering is called "color transparency". For example, yellow primer can make red more vivid, gray primer can make red red, positive blue primer can make black brighter, and aqua blue primer can make white cleaner and whiter.

Cream, pink, ivory, sky blue, white should be used as a primer, etc.

1. Debugging the sample in our daily life is a process that must be experienced before color matching, first of all, you must determine how many colors of secondary color paint are contained in the paint sample, and then calculate the type and then adjust the secondary color and secondary color in a small container.

2. The main color paint in our daily life is the kind that is used in a particularly large amount, the amount of paint coloring is particularly small, the secondary color paint with strong color strength is added to the main color paint, the two are evenly stirred, the sample and the color plate are compared, from shallow to deep, and repeatedly checked until the modulation reaches a satisfactory effect.

3. Some auxiliary agents can be added appropriately when blending, such as a little varnish, a little curing agent, a little desiccant and so on. In winter, it is best to add desiccant to the container before starting to match the color, on the one hand, it can not affect the color tone. On the other hand, the paint from the adjustment is also beautiful.

The paint of the compound color paint needs to choose the paint with the same properties of the two, and the solvent should also be soluble, otherwise it will affect the quality of the paint, and in serious cases, there will be delamination, several colors, gelatinization and so on.

4. When preparing paint, the color is generally with different color heads, and the color is matched in strict accordance with the principle of color matching, if due to a variety of pigments, the oiliness and density of various pigments are different, and there are "floating colors" and "flowers" and so on, at this time, a small amount of surfactant or leveling agent and anti-floating color agent can be added as appropriate to solve, and the amount added is generally 1%.

It can be used, our house to remove odor, to damp or something is used Jiahuan activated carbon, **Jiahuan*** is sold, and they also deliver it for free in Beijing, because they are also sellers in Beijing.

Open the windows for ventilation and put some negative ion plants to purify the air.

Find an environmental testing company.

Go to the ant-dwelling network and search.

During the day, pay attention to open the window to ventilate, and you can put some green leafy plants at home.