-
First, the substrate is suitable.
If you want to burst the gyokuro, the cultivation medium must be suitable for its growth, if the soil is not suitable, let alone burst, it will be very difficult to grow. Loose soils with good drainage properties should be used, and some particulate matter can be added to the bottom of the pot to increase air permeability.
2. Reasonable light.
It likes sunlight, but it is afraid of sunlight, so it is necessary to pay special attention to the light. It is best to raise it in a semi-shaded and ventilated environment, so that it will grow faster and the leaves will be more transparent. Shade nets are built in May in spring and summer, and the sun is fully visible in October.
3. Sufficient humidity.
The breeding environment should have a high humidity, too dry climate is not only not conducive to its bursting, but also makes the leaves very shriveled. Water the soil as soon as it is dry, and spray its leaves and surroundings with some water regularly.
Fourth, the propagation of new strains.
If there is only one gyokuro, it will take a long time to burst, and if you want to burst faster, you can re-cut a plant. When the small plant grows large, it will achieve the purpose of bursting the pot, but not too closely. In addition, you can choose to use Bika water-soluble fertilizer to provide enough nutrients for bursting pots.
-
1. Temperature: Gyokuro likes warmth, which is more suitable from 18 to 22 degrees. Too hot or too cold is not good for it, so it needs to be protected from cold in winter and cool down in summer, such as in a well-ventilated place as much as possible.
2. Light: It is best to put the gyokuro in a semi-shaded place, a little scattered light is enough, and too strong light should be avoided. However, it should not be left without light at all, and it should not be left in a dark place for a long time, otherwise the color of its leaves will become very unsightly, and its growth will be hindered.
3. Soil: Gyokuro's requirements for soil are still relatively high, and the nutrient-rich, loose and easy-to-drain soil is conducive to its growth. Specifically, it can be prepared with coconut bran, coarse sand, vermiculite, and Bika granular fertilizer.
4. Watering: The soil needs to be watered only after it is dry, and if it is not dry, it is not necessary to water it temporarily. It can be watered thoroughly, but it must not accumulate water. When the air is particularly dry, it is necessary to spray some water in particular.
-
If you want the gyokuro to burst the pot, you can cut off the head and cut off the excess leaves or elongated leaves in the center of the gyokuro. After cutting off the head of the jade pants eggplant, the nutrients can be more concentrated, which is conducive to the growth of side buds. During the maintenance period, giving Gyokuro a suitable growth environment, sufficient light and water to enable it to grow normally is also conducive to Gyokuro bursting.
Gyokuro is a succulent plant, the leaves are pure, noisy, fat and beautiful, the appearance is crystal clear, and the ornamental value is high. If you want Gyokuro to burst the pot, you need to cut off the head of Gyokuro, which can promote the growth of side buds. During the maintenance period, the leaves in the middle of the gyokuro can be cut off, leaving the leaves of the outer ring, and the reasonable watering and fertilization in the later stage, after 2 or 3 months, the gyokuro will burst into pots.
During the growth period, the gyokuro can also be potted with reasonable maintenance. Gyokuro has good negative tolerance and is suitable for growing in semi-cool and well-ventilated climates. During the maintenance period, it needs to be placed in a well-ventilated location, and the windows should be opened frequently to ensure indoor air circulation, and good environmental conditions are conducive to the growth of Gyokuro.
Gyokuro is not tolerant of strong light and is suitable for growing in bright light locations. During its growth period, gyokuro can be placed indoors in well-lit living rooms, windowsills, and study rooms, among other locations. During the maintenance period, do not place it in a place with strong sunlight, especially in the hot summer, as too much light will dry up or wilt the leaves of Gyokuro.
Gyokuro has thick leaves, the ability to store water, strong drought tolerance, and is not resistant to waterlogging. During the curing period, the gyokuro needs to be cured in a dry and ventilated location. During its growth period, it is necessary to water the gyokuro appropriately according to the dry and wet conditions of the soil, and keep the soil moist during the growing period, but it is necessary to control the water during the dormant period.
-
1. Soil When maintaining large gyokuro, it is necessary to use soil with good drainage, and the soil with high porosity and fertile soil is the best. You can use garden soil, mix saprophyllous soil in the soil, and you're good to go.
2. Lighting It has relatively high requirements for sunlight, and it cannot be too strong or too weak. Too strong is easy to sunburn the plant, too weak to achieve the effect of light. When curing, it can not be placed under the sun in direct light, it is easy to sunburn, you can build a sunshade on it, the morning and afternoon sunlight is mild, and you can shine directly.
3. Watering Watering it is irregular, and it can only be watered when it is suddenly completely dry, because its leaves are relatively thick and can store water, so there is no need to water too much.
4. Fertilization to fertilize it to diluted rotting fertilizer, fertilization can not be directly poured on the plant, should be watered three or four centimeters from the root, otherwise it is easy to burn seedlings. If animal manure is used for nutrient supplementation, it can be applied closer to the roots, without direct contact with the roots.
The propagation of large gyokuro can be done by sowing seeds, which is more complex and requires manual pollination. Bury the seed in the soil and wait for it to sprout before transplanting.
Usually you can spray it with diluted beer water, beer has the effect of disinfection, can effectively prevent and control virus infection, if infected with pests, you need to spray dichlorvos for deworming.
Gyokuro can be kept in a succulent way to make the succulent leaves full and transparent, but it should be noted that it should not be smothered during the high temperature period in summer and in the indoor heating environment in winter. If you want to stuff Gyokuro, you must first prepare a clean plastic bottle, cut the plastic bottle in half with scissors, unscrew the cap off the half with a lid, and burn a few holes with a hot screwdriver for the half without a lid. >>>More
Here's how:1. Change the pot. Once every two years in the spring, the pot and soil can be changed, and appropriate soybean cake fertilizer can be applied as the base fertilizer. >>>More
As long as the succulents are given a suitable environment, they will generally grow well, but if you want to know how to raise succulents to be more vigorous and easier to burst, you need to master some points. The most important of these are the right potting soil, the right size pots, and the fertile and loose soil to allow the succulents to thrive. In addition, proper propagation is required, as well as pest control is required, so that the pot can burst quickly. >>>More
Gyokuro is not only different from the general succulents, but also its ornamental points, most of the sedum succulents we usually raise, they are compact plants and leaf colors become the main ornamental points, while Gyokuro except for a few special varieties, most of them are emerald green and crystal clear as the main attraction. >>>More
1. Suitable temperature.
In the maintenance of oil painting wedding spider plant, in order to promote the bursting of the pot as soon as possible, a suitable temperature should be provided. In the case of suitable temperature, the growth rate of oil painting wedding spider plant will be relatively rapid, which can promote vigorous growth and burst as soon as possible. >>>More