What should I do if the screen of my Huawei phone fails and does not move?

If you are using a Huawei phone.

If the touch screen fails on your phone, you can troubleshoot it by following the steps below:

1.If the ambient temperature of your phone is too low, the touch screen may malfunction, which is affected by the physical characteristics of the screen device itself, and it is recommended that you try to keep your phone at an ambient temperature of 0 -35.

2.If the problem persists, we recommend that you bring your phone to a Huawei Customer Service Center with your proof of purchase.

If you haven't backed up your data before.

There is a risk of data loss at the time of detection.

Method 1: If it is a film, take off the film first and try it, it may be that the mobile phone film is too thick. Method 2:

Blow the screen with a hot hair dryer (hair blowing), pay attention to turning it on to the middle range, and blow it evenly to feel that the screen is hot (note: to remove the battery of the machine, I blow the phone until it is hot) Method 3: Use transparent glue to paste and tear the malfunction until the screen restores touch.

A method, everyone must hold the phone steady, and don't use too much force, so as not to lift the phone to the groundMethod 4: Restart the phone, it may be that there is too much memory, causing Caton, restart it. Method 5:

Open Huawei Mobile Services in the phone settings, find Hardware Detection, and find Multi-Touch. According to the prompts, if the above methods of screen calibration do not work, it is recommended to send it to the repair station for professional repair.

Summary. Hello dear, the Huawei mobile phone screen is out of order and there is no response, and the steps to solve the solution are as follows:

What should I do if the screen of my Huawei phone fails and does not respond?

Hello dear, the Huawei mobile phone screen is out of order and there is no response, and the steps to solve the solution are as follows:

Method 1: Restart the phone after it is turned off.

Method 2: Open your phone's settings, tap System & Updates, and then tap Software Update to update to the latest version.

Method 3: Now the screen of the mobile phone is a capacitive screen, and it does not support calibration. If the screen is not working, you can look at the phone screen to see if there is oil stains, such as water stains. You can use alcohol to wipe the screen of your Huawei phone, wipe it clean, and try again.

Method 4: If the Huawei phone is pasted with a mobile phone film, sometimes it will also affect the touch screen sensitivity of the phone. You can try to remove the film of the mobile phone and try to see if it still doesn't work.

Method 5: You can use the hardware detection that comes with the mobile phone to detect whether the screen is faulty. Open the service entry of the Huawei phone.

On the quick service page, click on more options in the rear to enter, after entering, we select the icon of intelligent detection to enter, in the manual detection page, select the option of touch screen to enter, after entering, click **Start detection, and then according to the prompts, swipe on the screen.

After detection, the page will give you whether the screen is normal or not. If it is abnormal, you can bring your mobile phone to the after-sales service for repair.

Dear, the above is the solution to the failure of the screen of Huawei mobile phones<>

Usually this problem can consider restarting the phone,If it doesn't work, I've seen a few times that the mobile phone film affects the touch screen,You tear it off and see,If it doesn't work, you can only go to after-sales,Huawei's after-sales charges are not expensive,The screen assembly doesn't cost much!

Restart the phone first, it's generally fine, if it's not good, then go to the after-sales inspection and repair, it's something wrong with other hardware, good luck!

The ways to fix the screen of a Huawei mobile phone when it fails are: clear the screen, restart the phone, force restart the phone, check the touch chip, and so on.

1. Clear the screen.

Use a cleaning cloth or paper towel to gently wipe the screen to remove dirt and stains that may cause Zhenwei to lose its touch.

2. Restart your phone.

Press and hold the power button of your Huawei phone until your phone turns off and restarts. If the screen failure of your Huawei phone is caused by a software issue, restarting your phone may fix the problem.

3. Force restart your phone.

If the problem still does not solve the problem after restarting your Huawei phone, you can try to force restart your phone. This is done by pressing and holding the phone's power button and the volume down button at the same time until the phone restarts.

4. Check the touch chip.

If the screen of your Huawei phone fails, it may be caused by a problem with the touch chip. It is recommended to go to the after-sales service center or a professional technician to check and repair the touch chip.

Common problems and causes of Huawei mobile phones:

1. Symptoms of HUAWEI P30 restarting.

When our Huawei P30 mobile phone suddenly freezes, crashes, and the phone keeps restarting repeatedly, it can occasionally boot into the system, but after entering the system, the mobile phone can adhere to normal use for a short time, and occasionally the mobile phone will turn on and enter the emergency backup mode, but the mobile phone still can't be turned on normally.

2. The reason why Huawei P30 has repeatedly restarted the travel shed.

The reason for the CPU virtual soldering of the mobile phone is partly due to the heavy fall of the mobile phone, and part of it belongs to the mobile phone often playing games, the temperature of the mobile phone CPU is too high, and the internal heat dissipation of the mobile phone motherboard is not rented in time, which leads to the thermal expansion and cold contraction of the mobile phone CPU, which in turn leads to the failure of the CPU virtual soldering and not booting up.

Reasons for the failure of the screen of Huawei mobile phones: 1. It may be that there are too many caches, and you only need to open the mobile phone assistant and click to clean up and accelerate. 2. If the memory is sufficient, then you need to press and hold the shutdown button to force the shutdown, and then turn it on.

3. When there is oil or water on the hand or touch screen, the touch screen will fail. Solution: Wipe the surface of the phone with a dry cloth to keep the touch screen clean.

If it doesn't work, you can restart the phone again4, when**incallin, swipe the screen to answer**, the screen does not respond. Solution: Please keep your hands and touch screen clean and dry.

5. When connecting the charger (especially when using on-board and non-standard chargers), the touch screen of the mobile phone fails. Solution: The signal frequency of the non-standard charger is the same as that of the touch screen, causing the touch screen to fail.

Please use the charger that comes standard with your phone to charge your phone. 6. If the problem persists, it is possible that the screen is damaged, please contact customer service or refer to this Huawei mobile phone after-sales service network inquiry method to bring the purchase invoice to the nearest service outlet for maintenance.

If Huawei's mobile phone screen often fails, it means that the mobile phone screen is malfunctioning, so you'd better replace the original screen with 1, so that it can be used better.

Restore the factory settings to see if it is back to normal, if it still doesn't work, it needs to be repaired.

Restart: If it doesn't work, restore the factory settings and see if it doesn't work, go to the after-sales inspection and repair.

Summary. 1.If the screen fails due to dust stains on the phone screen, use a clean damp cloth or wipes to clean the screen.

2.If it is because the mobile phone is used for a long time, resulting in intermittent screen failure, we only need to turn off or restart the mobile phone every once in a while, which generally appears on domestic mobile phones with poor quality. 3.

If it is because the screen fails when we are charging in some places where the voltage is not stable, we just need to stop playing with the phone while charging and wait for the phone to run out of charge. This often happens when charging on a high-speed rail train. 4.

If the screen fails because the phone is magnetized, we just need to avoid putting the phone together with a radio, TV and other magnetic objects for a long time. 5.Finally, if the screen fails due to the failure of the mobile phone system, and the processor cannot respond to our instructions in time, we only need to remove the mobile phone battery or force the mobile phone to restart.

1.If the screen fails due to dust stains on the phone screen, use a clean damp cloth or wipes to clean the screen. 2.

If it is because the mobile phone is used for a long time, resulting in intermittent screen failure, we only need to turn off or restart the mobile phone every once in a while, which generally appears on domestic mobile phones with poor quality. 3.If it is because the screen fails when we are charging in some places where the voltage is not stable, we just need to stop playing with the phone while charging and wait for the phone to run out of charge.

This often happens when charging on a high-speed rail train. 4.If the screen fails because the mobile phone is magnetized, we just need to avoid putting the mobile phone and radio, TV and other magnetic objects together for a long time.

5.Finally, if the screen fails due to the failure of the mobile phone system, and the processor cannot respond to our instructions in time, we only need to remove the mobile phone battery or force the mobile phone to restart.

Hello, I changed the screen in April before, and then the screen appeared touchscreen no.

It takes half an hour to turn on and turn on the power.

It's almost certainly a problem with the screen that needs to be repaired.

Need to change screens? Yes, oh, the screen that is replaced is not original and not durable.

If you don't change it, is there a problem with the hardware inside?

Basically, yes.

But some stores have to let me change the screen, how can I say it?

You can have a screen outside your phone store detect the specific cause.