-
What to do if your phone screen is broken.
-
Xiaomi mobile phone water screen failure, you can disassemble it yourself, dry it through a hair dryer, if it can be restored, it is good, if it cannot be restored, it is not easy to repair it yourself.
Disassembly is risky, approximate steps:
1. Prepare the corresponding tools and take out the SIM card slot.
2. Use a suction cup to disassemble the back cover of the phone.
3. Because the screen needs to be disassembled in front of the circled screws in the picture, the motherboard can be removed.
4. Disassemble the motherboard, take off the battery, blow it with a hair dryer, dry it, reinstall it, and start the inspection.
-
After water ingress, the motherboard is in poor contact. So it fails. It is recommended to go to the Xiaomi after-sales maintenance point for testing and consultation.
MIUI is an Android mobile phone operating system deeply customized by Xiaomi, MIUI for the native Android system more than 100 improvements, officially released on June 1, 2010, users cover 23 countries, highly sought after by mobile phone enthusiasts.
MIUI is committed to the most extreme ** and SMS applicable experience in smartphones, the original MIUI interface system, which perfectly matches the usage habits of Chinese users, is China's first Internet development model for mobile phone operating system development team, according to the feedback of MIUI community enthusiasts to improve, updated and iterated every week. MIUI has the world's largest mobile theme library, with a variety of personalized themes and lock screen methods, which can be flexibly customized locally.
-
Summary. If the Xiaomi phone is flooded, the screen is out of order, first you need to remove the battery immediately and plug it back in, then start the phone urgently, and turn on the safe mode for detection. In case of a serious circuit failure, it is recommended to immediately go to a Xiaomi service outlet for maintenance to prevent unnecessary losses.
The screen of the Xiaomi mobile phone is out of order when it is flooded, first of all, you need to immediately remove the battery, and then start the mobile phone urgently, and turn on the security mode for detection. In case of a serious circuit failure, it is recommended to immediately go to a Xiaomi service outlet for maintenance to prevent unnecessary losses.
Excuse me, but please go into more detail?
Xiaomi mobile phone is flooded, the screen fails early, first of all, you must immediately remove the battery, wipe it clean with a dry cloth, and then plug it back in, and then prepare for emergency start, turn on the phone to safe mode, scatter and detect. If there is a serious circuit fault in the detection, it is recommended to go to a Xiaomi service outlet for repair immediately. Before that, it is necessary to avoid disassembling the phone as much as possible to avoid causing greater losses.
-
1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.
2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.
3. Please take out the SIM card and microSD card.
4. Please bring your mobile phone to the customer service center for testing and processing as soon as possible to avoid unnecessary losses.
Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the hand-held machine.
2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.
3. Some mobile phones can be turned on and used normally after simple processing, but the mobile phones are made of precision electronic components.
There is a hidden risk after water ingress, so it is recommended not to try to turn it on.
4. During the after-sales maintenance process, data may be lost.
-
Redmi phone water into the screen failure solution:
1. Once the mobile phone enters the water, you must not turn it on immediately, when you turn it on, the current is easy to burn the motherboard after encountering water, and the mobile phone is close to being scrapped.
2. First of all, you should remove the battery of the mobile phone and wipe the moisture on the surface of the battery.
3. Then use a dry paper towel to absorb water from up and down to the phone.
4. Then use a hair dryer to aim at some small gaps in the mobile phone to blow and absorb water, pay special attention to: the hair dryer should not be turned on too hot, otherwise it will blow hot air into the mobile phone, which will easily cause some accessories in the mobile phone to preheat and melt.
5. Prepare a pack of cheap dried tea leaves and put your phone in it.
6. Squeeze out the air in the tea bag, tie the dead knot, and put it for two or three days to dry the tea leaves to absorb the excess water in the mobile phone.
Or put your phone in a ziplock bag and seal it.
7. Put it in a dry rice tank for two or three days, and the rice will also absorb the excess water in the mobile phone, because many broken particles in the rice will enter the cracks of the mobile phone, so it should be put into the ziplock bag first.
8. After two or three days, take out the mobile phone, you can prepare to turn it on, and at the same time, you will find that the inner screen of the mobile phone has no water mist.
-
Redmi's touch screen failure is solved in one move, and the mobile phone's touch screen is out of order, what will you do if you encounter these situations?
-
Remove the battery, dry it, or expose it to the sun if you don't have a heat gun. Good luck.
-
Hi! Don't use it yet.
Please go to a repair center near you or Xiaomi Home to have it tested.
Mi Home is open from Tuesday to Sunday, from 10 a.m. to 6 p.m. During the warranty period, non-man-made damage can be repaired free of charge.
If you don't have a branch near you, please go to Xiaomi's official website.
You may need to force restart your device:
1. On iPhone 8 and later: Press the volume up button and quickly release it. Next, press and quickly release the volume down button. Then press and hold the side button until you see the Apple logo. >>>More
If you are using a Huawei phone, we recommend that you do the following: >>>More
If you are using a vivo mobile phone, the screen failure solution: >>>More
If you are using a Huawei phone, it is recommended that you keep your phone off and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can check the address of a nearby Huawei Customer Service Center on the Huawei website. >>>More
The harder you smash, the better.