Which is better, German Kemer or German Merla

Updated on home 2024-08-06
13 answers
  1. Anonymous users2024-02-15

    Kaimei is of higher grade, more expensive, and the heat dissipation effect, the radiators on the market are not bad. Radiators aren't high-tech things after all. The reason why Kemer is expensive is because of the patented X2 technology.

    Energy saving 20, improve comfort 100, and the back of the radiator heat is small, the front is large, so that the impact on the wall, especially the wallpaper wall. Speaking of the place of origin, Kemei is of German origin, and Germany and Mera are of Turkey. The same size Kemer radiator is about 40 more expensive than Demerald**,**The gap is still very large, and the two are not comparable.

    However, Demerad is also a big brand, and the quality is naturally not bad, and Vaillant's radiators are OEM produced. In fact, Vaillant's furnace is also produced in Turkey, and when you ask Vaillant's official customer service, you will know that the only stoves made in Germany are Wolev and Viessmann.

  2. Anonymous users2024-02-14

    The quality of the wall-hung boiler is not generally poor, I bought it for 4 years, only used 4 winters, it was broken, the accessories are expensive and scary, a valve will cost 1200 yuan, and it will not be repaired, and it will be replaced directly by domestic ones. The price is too high, it is equivalent to 7,000 yuan for four winters, and it hurts!

  3. Anonymous users2024-02-13

    There is no doubt about the effect of German and Mera As for the difference between good and bad There is only the high and low of ** One is an old brand for many years Do you say it is good or not Kaimei wants to highlight the differentiation Don't make a fuss How to develop I say so, you should understand.

  4. Anonymous users2024-02-12

    Let's be honest: Demera is good!

    Why do you want to hear it?

    First of all, Kaimei, Ruitege, and Demera are the first to enter the Chinese market, and for a long time there are only these three brands, and it can be said that the entire Chinese steel plate radiator market is guided by these three brands. Be!

    Kemer Germany, Reitger Finland, German Mera Germany, Turkey.

    The warranty is 10 years, but the German Mera has 2,5 waterways, and the same volume is larger than the first two! Fact!

    Is it because of the low cost? No, it's because of the low-price strategy that Demerald has been taking, who in the industry doesn't know?!

    , strong brand, large heat dissipation, warranty is 10 years, and there are advantages! Which one do you say?

    How many people do Kemer deep down don't want to make more money with German goods? Riteger? A little bit more!

  5. Anonymous users2024-02-11

    Reitger is better, because Reitge is specialized in making steel radiators, the world's first steel radiator was invented by the company, and the history of Reitge is longer than that of Kemer.

  6. Anonymous users2024-02-10

    These two brands are not very clear, but I know one: lhz electric radiators imported from Germany, 5-12 years warranty, very good.

  7. Anonymous users2024-02-09

    Demerald is a German factory OEM in Turkey, and the brand is good. Yi Snuan is also a large factory in Turkey, with a relatively complete range of models, and the plate sheet has only been launched in recent years. Compared with the best quality of Demerade, the cost performance of Esnion is still very high.

    It's more people-friendly.

  8. Anonymous users2024-02-08

    I have not heard of the names of these two radiator brands, but according to the latest list of the top ten radiator brands in 2017, the radiator brands have Shenglao Sanhu, Bosen radiator, gold flagship Rubens, Nanshan, Sende, Sunflower, Longxing, etc., these brands are very good, you can go to see it, the radiator material is mainly steel radiator, copper and aluminum composite radiator and titanium magnesium aluminum radiator, according to the family water quality and heating method to choose the right radiator material.

  9. Anonymous users2024-02-07

    No matter how good and expensive a mechanical product is, it will never be broken. You can't use one case to negate a brand. Demeral is a well-known supplier of heating equipment in Turkey, otherwise Vaillant would not have acquired him in full, and the German Vaillant Group is the world's largest wall-hung boiler manufacturer.

    The company I used to work for sold thousands of Demerald wall-hung boilers, and only one gas proportional valve was replaced. Because it is an imported product, there is no way to do it with the high price of accessories.

  10. Anonymous users2024-02-06

    You have used it long enough, I installed it on December 29, 2011 in June and a thunder will not start, saying that the circuit board was struck by lightning, broken, and can only be replaced, and it cost 1,000 yuan to replace one.

  11. Anonymous users2024-02-05

    Where can I find the after-sales service for the ventilation valve upstairs? I'm located in Chengdu, and it's also the stove of Delamela, and it's only been used for three winters, and the domestic hot water is getting smaller and smaller, and now it's so small that you can't take a bath, what is the air change valve that is broken? Let's communicate, I can't find after-sales and only do my own research.

  12. Anonymous users2024-02-04

    When buying radiators, don't blindly worship foreigners, it may be imported brands in some fields, which are stronger than domestic ones, but this theory does not work in the radiator industry. Jin flagship reminds consumers that as long as they figure out their own heating water quality when purchasing, and choose a guaranteed domestic radiator, they will be guaranteed in terms of quality, after-sales and other aspects, which are more cost-effective than imported radiators.

  13. Anonymous users2024-02-03

    The company is one of the three famous heating equipment manufacturers in Europe and one of the world's top 500 enterprises. It is a multinational group company specializing in the production of gas heating equipment, and enjoys a high reputation in the world today. At present, it has its own wholly-owned companies and factories in Italy, Germany, the United Kingdom and Turkey, with an annual output of 600,000 units, which are exported to Europe, Asia, the Middle East and other parts of the world, especially Germany, Italy, the United Kingdom, Spain, France, Belgium, Jordan, Tunisia, CIS countries and China market.

    As one of the three major heating equipment manufacturers in Europe, Demrad has worked as an OEM for Duval in France, Dr. in Germany, and Chabé in Italy. In 2007, it successfully merged with Vaillant, the world's largest wall-hung boiler brand. In the Chinese market, especially in the northwest market of China, the German Merald boiler has been unanimously recognized by the northwest market for its unique design and reliable quality.

Related questions
11 answers2024-08-06

Buying a Camry is buying a shell, it can be said that the domestic Camry has completely destroyed the reputation of Jiamei, anyway, everyone in our industry says that those who buy Camry are nouveau riche who don't understand cars. >>>More

14 answers2024-08-06

2017 Fourth Round Evaluation: Art No. 1, CAFA No. 2, Tsinghua No. 4, Design Tsinghua No. 1, No. 2, Shi Mei No. 3, which do you think is the first.

8 answers2024-08-06

Meichao's products are much better than 303 putty powder, in terms of strength, waterproof effect, and anti-crack effect, they are much better than 303, and ** are much more expensive than 303, so 303 is generally used, which is cheaper. >>>More

29 answers2024-08-06

Here are some of the well-known brands recognized in the valve industry, which are widely recognized and have a high reputation. While rankings may vary depending on time and market conditions, the following brands are generally considered to be among the top brands in the valve industry: >>>More

20 answers2024-08-06

I think it's better to have an integrated stove from Senge. >>>More