Which is better?

Nowadays, the concept of environmental protection is getting heavier and heavier, and many people will prefer environmentally friendly materials when purchasing home improvement materials, which also causes more and more environmentally friendly raw materials, and many materials will be promoted under the slogan of environmental protection, in fact, there is still a big gap from environmental protection. There are many places where plates will be used in home decoration, and all kinds of furniture and flooring are inseparable from the selection of plates, especially the customization of environmentally friendly wardrobe plates. So what are the specific types of home decoration environmental protection plates, let's follow a brief understanding.

1. Ecological paint-free board.

Ecological paint-free board is based on woodworking board or solid wood board, paste some colored paper soaked in melamine as decorative panel, with its own aesthetic effect, do not spray paint can be directly made into a wardrobe, so that you can eliminate paint pollution and maintain the best environmental performance; However, it is not said that the paint-free board is completely pollution-free, and everyone still has to pay attention to the brand and environmental protection level when purchasing.

2. Solid wood particle board (particleboard).

Solid wood particle board is made of wood or wood poles, logs are broken, fine wood fibers are used on both sides, long wood fibers are sandwiched in the middle, and glue is applied to the wood-based board under heat and pressure, and the panel finish is melamine finish, and its cross-section presents a honeycomb board. The structure is relatively strong, the bearing capacity is better, because the amount of glue used is not much, so it carries less formaldehyde, which is very green and environmentally friendly.

3. MDF.

MDF is a board made of wood fiber or other plant fibers as raw materials, prepared by fibers, applied with synthetic resin, and pressed under the conditions of heating and pressurization. The surface of the MDF is smooth and flat, the material is fine, the performance is stable, the edge is firm, and the surface of the board is decorative. However, MDF has poor moisture resistance.

In contrast, MDF has a worse grip force than particleboard, and if the screws are loosened after tightening, it is difficult to fix them in the same position.

Fourth, solid wood boards.

Solid wood planks are planks made from intact timber (logs). Solid wood boards are generally classified according to the name of the board substance (log material), and there is no unified standard specification. Solid wood planks are durable, natural textures, most of them have the unique aroma of natural wood, have good moisture absorption and air permeability, are beneficial to human health, do not cause environmental pollution, and are high-quality boards for making high-end furniture and decorating houses.

Solid wood panels made of special materials (e.g. beech) are also ideal for the manufacture of gun butts and precision instruments. However, solid wood planks are generally too expensive.

The above is some introduction to the wardrobe environmental protection board, you can use it as a reference when buying the board, but here it is recommended that you must choose the board with a high environmental protection grade, and you can also let the business provide relevant proof of compliance with environmental protection standards.

Ecological environmental protection board manufacturers source wood original work is more professional, their environmental protection boards are up to standard, has always had a good reputation, I am doing the decoration industry, not less in their buy boards, this brand of plates is the most reliable one I have been in contact with many ecological board brands.

Here are some recommendations for some common environmentally friendly Yunsun plates:

1.Fiberboard side high chain: Fiberboard is a board made of wood fibers bonded by glue, which usually does not contain harmful VOCs (volatile organic compounds) and can effectively use Ninchi wood resources in the manufacturing process.

Fiberboard is widely used in furniture, decoration and construction.

2.Particleboard: Particleboard is a board made of wood shavings bonded by glue, similar to fiberboard, it usually has a lower VOCs content, and is a more environmentally friendly board. Particleboard is also widely used in furniture and decoration.

3.Green MDF: Green MDF, also known as MDF, is a high-quality, environmentally friendly board made of wood fibers and glue bonded at high temperature and pressure.

It has the characteristics of flat, strong and easy to process, and the glue commonly used will also choose formaldehyde-free or low-formaldehyde-friendly environmentally friendly glue.

4.Eco board: Eco board is a new type of eco-friendly board, made of natural plant fibers and non-toxic and harmless glue. It has high environmental performance and good texture, and is widely used in decoration and furniture making.

When purchasing environmentally friendly boards, it is best to choose products that have been certified by authorities, such as E0 level boards, which means that the formaldehyde emission of the plates is extremely low in international standards. In addition, you can check the relevant marks and certificates for the plates to learn about the environmental commitment and production process of the plate manufacturer.

The main Ausborne has always insisted on using high-quality pine as a material, doing fine processing, and the production of environmentally friendly boards is practical and cost-effective, and it is also very reasonable, moisture-proof and waterproof performance is also the same type of products, which is definitely the first choice for home decoration or office decoration. Osborne is also one of the top 10 brands of sheet metal, especially popular and trusted by consumers.

I have been in contact with many brands and found that the quality of Fuqing is very good, and the high-quality 5A core board is used.

With the continuous improvement of the economic level, when we carry out home decoration, we are not only limited to the attention to the first home decoration materials, but also the health and environmental protection of the product. As one of the commonly used materials in home decoration, environmental performance is definitely very important. SoWhat plates are more environmentally friendlyHow to choose an eco-friendly wardrobe?

Let's answer your questions.

To understand which boards are more environmentally friendly, we must first understand various plates.

1.Solid wood boards.

Solid wood boards are made of intact wood, which is very strong and durable, with clear textures and relatively higher environmental protection. At the same time, the cost is also very high, hardwood is sensitive to the environment and climate, and maintenance is troublesome.

2.Particleboard.

Particleboard is the choice of many people as a custom home finger selling board, because the particleboard is added to a certain moisture-proof agent, it can also become a moisture-proof particleboard, and the expansion coefficient is small after water absorption, so it is used in cabinets, bathroom cabinets and other environments.

3.Paint-free board.

Paint-free board, also known as eco-board, is one of our common boards, and its substrate is particleboard and MDF, and the substrate and finish are laminated. The environmental performance is average, but the cost performance will be a little higher.

4.MDF.

Because of its excellent performance and is an effective way for the comprehensive and rational utilization of wood, MDF is often used in furniture or as a wardrobe divider.

How to choose an eco-friendly wardrobe.

1.Look at the environmental level of the wardrobe panels.

Generally, the board has an environmental protection grade, and the environmental protection level is determined according to the amount of formaldehyde released. E0 environmentally friendly wardrobe board is the most environmentally friendly, it is the most environmentally friendly, it does not mean that there is no formaldehyde release at all, but relatively little.

2.See if the panel veneer used for wardrobes is environmentally friendly.

Because veneers can make the wardrobe more wear-resistant and scratch-resistant, it is a non-destructive use rate. Melamine is mostly used for board veneers, and there is basically no taste after curing at high temperature, and the environmental performance is also relatively good.

3.See if the board used for wardrobe is environmentally friendly.

The boards used in the overall wardrobe are generally solid wood, particle board, MDF, etc., among which solid wood boards are the most environmentally friendly, with stable structure and strong pressure resistance. Other boards need to use glue to some extent, and the environmental protection is relatively poor.

4.Look at the edge of the wardrobe.

Custom wardrobe edge banding is very important, beautiful, firm, service life are directly related to edge banding.

5.Look at the brand of wardrobe.

The reason why it can become a well-known brand is precisely because its quality and reputation are very good. So it will be more secure to choose something from a brand.

Summary: The above is an introduction to what board is more environmentally friendly and how to choose an environmentally friendly wardrobe. I hope that the content introduced in this article can help you better understand environmentally friendly boards, and be able to choose environmentally friendly and cost-effective wardrobes and other furniture.

Environmental protection ecological board is an environmentally friendly man-made board, it adopts advanced production technology, the production process does not use formaldehyde and other harmful substances common in the traditional board, not only in line with environmental protection requirements, but also has the characteristics of non-toxic, disadvantage and odorless.

As a new type of man-made panel, the eco-friendly board has a variety of advantages. First of all, it has good environmental performance, does not contain volatile organic compounds, and will not cause harm to the human body and the environment. Secondly, its production process is simple, less pollutant emissions, and has good ecological performance.

In addition, the plate has the characteristics of high hardness, no deformation, good water resistance, etc., and has a wide range of uses, which can be used in furniture, architectural decoration, vehicle and ship cabin panels and other fields.

In addition to the advantages mentioned above, there are also many precautions in the use and maintenance of eco-friendly eco-boards. First of all, harmful factors such as exposure to sunlight and high temperature should be avoided during use, so as to reduce the aging rate of the plate and prolong the service life. Secondly, it is necessary to regularly clean, wax, maintain, and do a good job of daily maintenance work, so as to keep the surface of the plate bright and tidy.

In short, the environmental protection ecological board is a very excellent man-made board, which can be widely used in various fields, and its environmental performance and other advantages have brought a positive effect on people's lives and the environment. In the future, with the continuous improvement of environmental awareness, environmental protection ecological board will have a wider application prospect. <>