The cowhide shoes are soaked in water, the leather shoes are stained with water, and the leather is

Soaking in water is easy to fade and deform, in addition to trying to stay away from water vapor, you can:

1.Wipe off the moisture of the shoes thoroughly, including the soles and seams2Stuff newspaper or dehumidifier into your shoes to allow the moisture to dry quickly, and do not use hot air or a dryer as it will deform your shoes.

3.When drying, it should be placed in a cool place that does not shine on the sun or lights, do not bask in the sun, then the skin will crack, let the shoes completely dry before wearing.

After soaking in water, cowhide shoes should be placed in a ventilated and dry place to dry, avoid exposure and drying, and do not put the toe toe to the ground vertically, should be placed flat to avoid deformation. Maintenance method of cowhide leather shoes:

1. Wipe off the dust on the surface of the shoes with a clean soft cloth, and then evenly oil and wipe.

2. When it rains or snows, try not to wear leather shoes, or you can wear shoe covers for protection.

3. Do not touch oil, acidic, alkaline and sharp substances to prevent corrosion damage.

4. When storing leather shoes, they should be wiped clean and oiled, and placed in a dry place, and should not be squeezed to cause deformation. After storage for a period of time (especially in the mildew rainy season), it should be taken out for ventilation and re-wiped to prevent mold.

To dry in the shade can not be dried, after drying, shake it in it and put the shoe holder, if not, use waste paper to line the front of Xie.

Leave it to dry in a ventilated place and apply a high-quality dermal oil, such as a leather conditioner that mimics oil. If the shoes are seriously soaked in water, they should be sent to a professional shoe care store in time to care for your shoes.

After the leather encounters water, it will hydrolyze the oil introduced into the leather, thereby destroying the oil film between the internal fibers of the leather, and the oil in the leather will be lost with the volatilization of water, so that the internal fibers of the leather will be bonded together with each other, so as to lose the room for maneuver to move, and as a result, the friction resistance between the internal fibers of the leather will become larger, and the leather will become hard and brittle, so the leather can not be washed.

After the leather is wet, it can not be exposed to the sun or blown dry with hot air, after the leather meets the water, the water should be blotted dry with a clean soft cloth, put it in a ventilated and breathable place to dry naturally, and then put on high-quality leather care oil, such as leather skin imitation oil leather care agent.

If the shoes encounter serious water immersion, don't say that as soon as possible to send to a professional shoe care store to care for your shoes, careless or improper care may ruin the future life of the shoes, for your shoes, I believe you will take care of them.

Leather shoes maintenance precautions:

1. Leather shoes should not be exposed to the sun and roasted with fire. Under the scorching sun, the leather upper of the leather shoe is afraid of exposure to the sun and cannot be baked near the stove or other heat sources, because exposure and baking will make the leather shoe loose. If there is heavy sweat and moisture in the shoes, dry them in a place with the sun on your back.

2. When varnishing leather shoes, the frequency of oiling should not be too high, but it must not be saved. In addition to the same color maintenance oil, in fact, some daily foods also have leather maintenance functions.

3. Less contact with water. After the leather shoes are soaked in water, the leather is easy to deform and fade, and the stitches are easy to break. If it has been wet, it should be dried and polished immediately.

But be careful not to oil your shoes when they're wet, leather shoes tend to be more fragile than usual when they're wet, so be sure to be gentle when doing this.

After the leather shoes are wet, they can not be exposed to the sun or dried with hot air, because in doing so, the internal temperature of the dermis rises, and the hydrolysis of the oil is accelerated, and the oil will be lost with the volatilization of water, so that the internal fibers of the leather are bonded to each other, and the result is worse than natural cool drying, and the leather becomes harder and more brittle, so after the leather encounters water, the water should be absorbed with a clean and soft cloth, and the water should be dried in a ventilated and breathable place naturally, and then the high-quality leather care oil should be added.

The reason why animal skins are soft is because when tanning, oil is introduced into the inside of animal skins to form an oil film that fully covers the surface of the intradermal fibers, that is, separated by a layer of oil film between the surfaces of the intradermal fibers. When the oil film reaches the right thickness, the friction between the fibers inside the leather is equivalent to the friction of the oil molecules, so the leather is soft.

However, after the leather encounters water, the oil introduced into the leather will be hydrolyzed, thereby destroying the oil film between the internal fibers of the leather, and the oil in the skin will be lost with the volatilization of water, so the internal fibers of the leather will be bonded together with each other, so as to lose the room for maneuver to move, and as a result, the friction resistance between the internal fibers of the leather will become larger, and the leather will become hard and brittle, so the leather can not be washed.

This is the local water content of the leather shoes saturated and rising, the first thing to do is to absorb water, and then finalize.

I cannot bake it with a hair dryer or fire. You can use a paper towel to absorb the surface moisture, and then stuff the newspaper ball into the inside of the shoe, taking care to tuck the entire upper top to a flat level. In the bulging place on the surface, you can place a book and press it.

Store in a cool, dry place and wait for the water to evaporate. Check in the middle to see how the upper changes. After the leather shoes are dry, they should be carefully decontaminated, oiled, wiped and maintained.

You should know that the leather will swell and soften when exposed to water, which will cause the leather shoes to deform. At this time, you need to wipe the water on the leather shoes as much as possible, especially the connection between the sole and the upper. Use a paper towel or rag to absorb moisture from the surface.

After the shoes are naturally dried, wipe the shoes with shoe polish to replenish the oil as much as possible, and then stuff a ball of newspaper into the shoes to avoid the deformation of the leather because of the loss of elasticity.

To sum up, after the shoes are blistered, you need to quickly dry the surface moisture and dry it, then wipe it with shoe polish, and finally stuff the shoes with newspaper to avoid the shoes from going out of shape, and after the shoes are naturally dried, there will be no other problems.

Deal with it in a timely manner. After the leather shoes enter the water, the leather will swell and be soft when exposed to water, which is easy to deform the leather shoes. At this time, the most important thing is to dry the water in the shoes as much as possible.

You can use a clean cotton cloth to dry the moisture on the surface of the shoe first, especially at the junction between the sole and the upper. You can then use a paper towel or newspaper to quickly suck out the moisture from the inside of the shoes.

After the cowhide shoes are soaked in water and damp, they should be dried in a ventilated and dry place, avoid exposure to the sun and drying, and do not put the toe toe straight to the ground, but should be placed straight to avoid deformation. Be careful not to touch oily, acidic, alkaline and sharp substances to prevent corrosion damage.

First remove the dirt, suck out the moisture in the shoes, and then stuff the shoes with desiccant (if not, you can replace it with cardboard), put it in a ventilated and cool place to dry, and then change the desiccant after half an hour. Dry and coat with raw chicken fat and then apply shoe polish again. After two days, you can beat the shoe polish again, and do not expose to the sun or bake.

Cowhide shoes are easy to open after soaking, like this, it is best to take it to the store and re-glue the glue. Otherwise, it may be possible to open the glue when you use it.

Generally speaking, leather shoes cannot be stained with water, and some leather shoes will change color when wet.

Peeling off may also be the cause of water, and leather shoes should be worn for a period of time, and they should be exposed to the sun and not exposed to the sun. In fact, the main reason for wax bending is good maintenance, and the maintenance methods of leather shoes are as follows:

1. Before storage, the leather boots should be wiped off the dust and covered with a thin layer of shoe polish, not too thick;

2. You can rub a small amount of raw chicken fat, lard or glycerin;

3. Stuff mothballs inside the boots to prevent insects, stuff moisture-proof agents to prevent moisture, and then put them into the shoe support;

4. Find a dry place to store;

5. Take out the dust regularly to remove mildew, use a soft cloth, and then make up the shoe polish.