Is the special polished tile double layer through body?

No. Polished brick is a kind of bright brick made by polishing the surface of the whole brick body, which is a kind of whole brick. Compared with full-body bricks, the surface of polished tiles is much smoother.

Polished tiles are hard and wear-resistant, and are suitable for use in most indoor spaces except toilets and kitchens, such as balconies, exterior wall decorations, etc. On the basis of the use of seepage technology, polished tiles can make a variety of imitation stone and imitation wood effects.

Advantages of polished tiles:

1. Advantage 1: No radioactive elements: natural stone is a mineral, not sintered at high temperature, so it contains individual trace radioactive elements, and long-term exposure will be harmful to the human body; Polished tiles will not cause harm to the human body;

2. Advantage 2: basically controllable no color difference: natural stone due to the diagenesis time, different shades of rock layers, large color difference, polished bricks are carefully deployed, the same batch of products have the same color, basically no color difference;

3. Advantage 3: High bending strength: natural stone is naturally formed, and the timber time and weathering are not the same, resulting in different degrees of tightness and strength; The polished bricks are pressed by thousands of tons of hydraulic presses, and then sintered at a high temperature of more than 1200 meters, with high strength;

4. Advantage 4: Thin brick body and light weight: natural stone has a large processing thickness and bulky due to its low strength, which increases the load weight of the floor building, forms a potential threat, increases the cost, and increases the difficulty of transportation and paving.

5. Advantage five: anti-slip: it is very important for the floor tiles to be safe and non-slip, especially for families with elderly and children, who pay more attention to the anti-slip effect of tiles.

The surface of the polished tile is smooth and bright, many consumers think that its anti-slip effect is poor, in case of sprinkling water increases the potential safety hazards, so they avoid it, so they have to choose the "light restrained" matte tile. In fact, all polished tiles are non-slip, if there is soil on the brick, it will be slippery, and if there is water, it will be astringent, so as long as you do a good job of daily cleaning, it will not affect its anti-slip effect. In terms of anti-slip properties, polished tiles are the same as matte tiles.

The anti-slip coefficient of polished bricks is small, and other bricks can be considered to be anti-slip, and special tiles are expensive.

First of all, the hardness and surface flatness of polished tiles have nothing to do with anti-slip. It stands to reason that the higher the gloss, the worse the slip resistance should be, but in fact, the gloss of polished tiles is not directly related to the slip resistance. In the case of no water on the brick surface, the gloss of 55° is the same as that of 90° anti-slip; When there is water on the brick surface, it will be slippery at both 55° and 90°.

The greater the friction generated by a person walking on a brick surface, the less likely it is to slip. In the case that the person and the ground are fixed, the greater the friction coefficient of the sole, the better the anti-slip effect. (A small piece of wood slides a shorter distance on the velvet than on the ice, because the coefficient of friction of the flannel is greater than that of the ice.) ）

Full-body bricks and polished bricks are the most frequently used interior wall and ground decoration materials in housing decoration. So, do you know the difference between the two? Next, let's take a look with PCHOUSE.

1. **Different. ** Problems are the most concerned issues for renovation owners. Generally speaking, the size of polished tiles is about 600*800 large tiles, and the whole body bricks are generally 300*300 small floor tiles, and the process is more difficult than the polished tiles.

In addition, due to the rich color of the whole brick, and at the same time the bright and clean polished brick, it will be higher.

2. Different colors. The color of polished brick is relatively small, most of them have no change, and the various colors on the brick surface are also very short-sighted. But the whole brick is different, its color is richer than that of polished brick.

Because the whole brick is a glaze after the pattern is printed, the color will be more vivid and completely uncontrolled.

3. The brick embryo is different. The most critical point between full-body bricks and polished bricks is the distinction between bricks. Polished bricks generally penetrate the color into the brick body, penetrating into the place 2 mm below the surface of the brick, and the color of the brick body and the surface are almost identical.

4. The whole brick is completely different, because it will not penetrate into the brick at all, and it can be seen from the side that the whole brick is divided into layers and is also very obvious, and the glaze can be clearly seen. So, if the glaze has a thin layer of color, we can be sure that it is a full-body brick.

First, the difference between full-body bricks and polished tiles.

1. The color is different, the color of the polished brick is relatively single, there is not much change, and the difference between the various colors of the brick surface will not be too strong, but the whole body brick is different, and the whole body brick is richer than the color of the polished brick. The whole brick is glazed after printing the pattern, the color should be more vivid, and it is completely unrestricted, red, black, yellow, blue, blue and purple are no problem.

2. The texture is different, the texture of the polished brick and the whole brick is not the same, the texture of the polished brick can not be very small, and the glazed brick can be like a needle and thread.

3. The brick is different, the brick is the key to distinguish the polished brick and the whole brick, the polished brick is to infiltrate the color into the brick, so the color of the brick body is the same as the surface 1-2mm below the surface. The whole brick is completely different, it will not penetrate into the brick at all, look at the side of the brick, the whole brick layering is more obvious, it is obvious that you can see the glaze, if the brick surface only has a very simple color layer, it must be the whole brick.

4. The wear resistance is different, and the glazed brick is to add a layer of glaze to the surface of the polished brick, in contrast, the brightness is good and the transparency is good, but the wear resistance is not as good as the polished brick. The surface of the polished brick is very thick and wear-resistant, while the surface of the glazed brick is a layer of glaze, which is very thin and not so wear-resistant.

5. The anti-fouling is different, the polished brick is suitable for use in most indoor spaces except the bathroom and kitchen, but the concave and convex pores left by the polished brick during the production will hide dirt and dirt, resulting in the surface is easy to infiltrate pollutants, and even some tea poured on the polished brick is weak, and the anti-pollution effect of the whole brick is far more than that of the polished brick.

Choosing the right tile for your home is not a simple task, but it takes a lot of time to check the quality of the tile to see if it meets the needs of the individual. So what is the difference between polished tiles and full-body tiles, and how to choose the right tiles, do you understand? Now let's take a look.

1. What is the difference between polished bricks and full-body bricks.

The size of the polished tile is relatively large, mostly 600mm, in the design of the color, there is usually only one, the surface texture is also relatively large, the wear resistance is high, ** discount. The size of the whole brick is relatively small, 300mm, with rich colors, complex and good-looking, but it is more expensive.

Second, how to choose the right tile.

1. In the process of buying tiles, it is necessary to roughly estimate the weight of the tiles, if the mass of the tiles is larger, the density is relatively high. Therefore, in the shopping mall, you can compare tiles of the same size to see which one is heavier, so as to choose the tile that is more in line with your own paving.

2. The tiles purchased by individuals must have high hardness, otherwise when they are used in the later stage, it is easy to leave scratches on them if they are not careful, which seriously affects the normal use of tiles. Therefore, you can try to scrape the tiles with a key to see if there will be traces.

3. Choose a place with high brightness and observe the tile from the side to see how glossy it is. Generally speaking, the higher the gloss of the tile, the better the decorative effect. In addition, you can measure the size of the tiles yourself to see if it will be too different.

4. When buying tiles, you can also use your hands to gently knock on the tiles to see the sound it makes, if it makes a relatively crisp sound, it means that the quality of the tiles is good, you can rest assured to buy, otherwise you should pay special attention to it.

What is the difference between polished tiles and full-body tiles, and how to choose the right tiles, I will introduce it here, do you understand it? The difference between polished tiles and full-body bricks is very big, you need to confirm it in advance, and choose the one that is suitable for your own use.