Where is the best place to place the heater in the bathroom?

Taking a bath in cold weather has to be said to be a very courageous thing, so in the process of life decoration, the owner will choose to install a heater, so that the whole space will be more comfortable and warmer when taking a bath. Where is the best place to install the heater? Be sure to do more to understand, otherwise the installation effect will not meet the requirements, and it will be very painful when taking a bath.

The most important thing is that the heater must choose a good quality, if some installation methods are not right, the cold air will be discharged when taking a bath, so that the more you wash, the colder it will become. <>

Under normal circumstances, after the bathroom is made with a suspended ceiling, the owner will choose to install the heaterdrywall, dig a slightly smaller hole, and directly connect the heater to the electrical switch, which is very simple. After hanging the ceiling, it is necessary to walk the line directly from the upper part of the roof, as for how much should be calculated according to the power, pay attention to the wall should not have electrical appliances or switch sockets, so as not to cause danger when the nozzle enters the water when bathing. <>

I feel that the bathroom is a relatively humid place for a long time, and it will be very unsafe to install it in the shower room, so I am more in favor of safety.

On the outside of the shower room. However, from the perspective of life experience, if you want not to be cold when taking a bath, the most important thing is to change clothes after entering the bathroom, and it is more suitable to install it outside the shower. However, some people are afraid of the cold and also need warm air when taking a bath.

Now the quality of the heater is relatively good, and it is also suitable to install it on the top of the bathroom bath, but the final location should be decided according to your own thoughts. <>

Personally, I recommend that the heater be installed outside the shower room because of the humidity of the air inside.

is very large, water vapor.

There are also a lot of them, and there are still potential safety hazards. The best location is to be near the door, in the middle of the whole bathroom, which can heat the whole direction. The owners should not take it lightly when decorating the bathroom, after all, the use of the bathroom is very frequent in the future.

At this time, it should be placed in a relatively open place, which can be installed on the ceiling, and then it can also be placed next to the shower area, or it can be placed in drywall.

I think it's better to put it in the middle of the bathroom because it's spacious and very high off the floor.

It is best to put it on the balcony, when people enter the bathroom to feel warm for the first time, and it can also promote air circulation.

Bathroom heater use:

1. When using the bathroom heater, be sure to operate it according to the correct operation steps, especially when the heater is turned off, the heater must not directly cut off the power supply. Under normal circumstances, if you want to turn on the bathroom heater, you should first turn on the power of the heater, and when the heater has been running for a period of time, you can turn on the switch of the bathroom heater for air supply.

2. As long as the switch of the bathroom heater is turned on, the hot air can be transported to the bathroom. The heater is generally equipped with a variety of air supply modes, such as: hot air, warm air, etc., users only need to rotate the rotation button on the heater, you can adjust the warm air to the air supply mode you want.

3. If the user wants to adjust the running wind direction of the warm air, he can adjust the fan blade button, which can help the user adjust the running wind direction of the warm air to the fixed air supply direction he wants. In addition, in the process of using the bathroom heater, it is absolutely impossible to spray the bathroom heater directly with water, otherwise it is easy to cause a short circuit in the bathroom heater.

When buying a bathroom heater, you need to pay attention to:

1. There are many bathroom heater brands on the market, and the quality is uneven, when you buy bathroom heaters, you must first understand whether the reputation of the bathroom heater brand is good, and it is recommended that you choose big brand manufacturers, so that the product quality will be more guaranteed, and the after-sales service is more perfect.

2. There are many specifications and models of bathroom heater, different specifications and models, and their performance, shape, size, and scope of use will also be different.

In winter, except for Hainan Province, which is relatively warm, most parts of China are relatively cold, and the further north you go, the colder it becomes, even in Guangdong, the winter is only a few degrees, not to mention in the north, it will drop to minus 20 degrees. So taking a bath is a very difficult thing, in the south some people love hygiene, or wash once a day, some people wash every two days, in the north, especially in the school dormitory without independent bathroom, many people can only once a week, but no matter how many times you wash, as long as you take a bath, it is easy to catch a cold, will catch a cold, basically uncomfortable for a week, then it will affect study and work, the impact is quite serious. Therefore, many people have a shadow of taking a bath, so they dare not take a bath, and the whole person will stink, affecting their interpersonal relationships, which is very embarrassing.

So no matter how often you take a bath, for your own health and not affect your daily study and work, then you must use a certain heating equipment in the bathroom, for example, the heater is a very suitable choice, it is a combination of electric motors, ventilators and air heaters, suitable for various places, such as home toilets, offices or factories, it can make air circulation, but also quickly warm the room, as long as the dust concentration in the air is not too high, Then there is no danger of **, and it can still be used safely and continuously. For the people, you can put it in the bathroom, one is enough, the function is very powerful, you can quickly warm up the bathroom, the power consumption is not very high, the biggest benefit is that we can still stay healthy in winter, and will not catch a cold, the whole person is also very energetic, maintain personal hygiene.

Our indoor bathroom is quite spacious, the shower is placed on the wall, and it is relatively high from the ground, so you can put the heater on the other side of the shower to ensure that the shower will not splash water into the heater during the use process, causing failure. And this can also ensure that the water can still maintain the heat of the water from the shower to your head, and will not be quickly dissipated by the air, and this is equivalent to further exerting the function of the heater. If there is no shower in the bathroom, it is even simpler, as long as it is placed relatively close to the ceiling, which is out of the reach of our hair, then this will not only play its role, but also ensure our personal safety.

If the bathroom is the size of half a bedroom, then you can actually install it in the middle of the ceiling, because it is more convenient for the air circulation in the bathroom, and it is closer to our body, we will feel warmer.

If you want to install a heater in the bathroom, you need to know the specific location. Where is the bathroom heater installed? PChouse will take you to find out.

The bathroom heater can be installed on the ceiling or outside the shower door.

1. Installed on the ceiling.

Bathrooms are generally made of suspended ceilings, and many owners choose to fix the heater on the gypsum board, which is conducive to pipe installation and exhaust. If the ceiling has been made, it is recommended to run the line from the top. Be careful not to have electrical appliances or switches and sockets on the wall. Avoid short circuits when water leaks drip down.

2. Install it outside the door of the shower room.

Some owners feel that the bathroom is moist and it is not safe to install it in the bathroom, so they install the heater outside the door of the shower room. This way it won't be cold when you change clothes. Here I would like to warmly remind everyone that the heater must not be installed in the shower room, because there is a lot of temperature and water vapor to avoid hidden dangers in the case.

It is recommended to install it in a non-shower area, close to the door, so that the temperature of the entire bathroom can be heated.

A fan heater is a heating appliance that can make the temperature rise in a short period of time to achieve a heating effect. Therefore, it is indispensable for people to decorate the bathroom. So where is the bathroom heater installed? Which brand of heater is good? Let's take a look!

First of all, the heater can be installed on the ceiling of the bathroom and installed on the ceiling of the bathroom, which is more conducive to pipe installation and exhaust. But pay attention to avoid the water pipe interface on the top, otherwise there will be water leakage short circuit; The bath room is humid, and installing a heater will be a safety hazard. It is recommended to install the heater outside the shower room door.

In this way, it will not be cold when you go into the bathroom to change clothes after taking a shower.

Which brand of heater is good?

1.Emmett.

Founded in Taiwan in 1973, Emmet Electric started with the production of electric fans, and currently produces a wide range of small household appliances. To meet the needs of different consumers, it has become a famous brand of small household appliances in Guangdong.

2.Saiyi. The heater produced by Saiyi is one of the top ten brands of heating appliances, which was established in 1996 and has a history of decades in the industry, mainly engaged in the research and development, production and sales of refrigerator brands, washing machines, heaters and other electrical appliances.

At present, the products are exported to many cities across the country and are deeply loved by consumers.

3.Co-creation. Shenzhen Lianchuang Technology Group was established in Shenzhen in 1993, the earliest is to produce air conditioning fans, after years of development, Lianchuang Technology Group has fully mastered the core technology and self-supporting capabilities of air conditioning fans, electric fans, electric heaters, bathroom ceiling heaters, water heaters and other household appliances.

Become a leading enterprise in the domestic business gift industry.

Summary: The above is where is the installation location of the bathroom heater introduced to you? and which brand of bathroom heater is better, I hope to help friends in need. If you need to know more about relevant knowledge in the future, please pay attention to Qeeka Home information.

Although bathroom heaters are more common, what exactly is the working principle of it? PChouse will take you to find out.

The heater is a combination of a ventilator, an electric motor and a radiator. It is suitable for various types of workshops where the air allows recirculation, and can be used for circulating air heating when the air does not contain dusty and flammable gases. It is mainly composed of an air heater and a fan, the air heater dissipates heat, and then the fan is sent out to adjust the indoor air temperature.

The air heater consists of spiral finned tubes.

For example, the heat dissipation pipe of the steam heater is wound on the seamless boiler tube with a wall thickness of aluminum strip special equipment, the piece spacing is, the pipe and the heat medium flow pipe are integral welded structure, and the working pressure of the heater is below.